[Communication Drivers] Device Data Copy Tool

Summary

Last update:2021/03/23

Details

Note:: Precautions for adding a new driver onto Windows Vista/7

Title

Device Data Copy Tool

Applicable Software

GP-Pro EX Ver. 2.20.000 or later

To check your version, go to the "Help" menu -> "Version Info".

Compatible OS

Windows XP 32bit OS (any Service Pack, any edition)
Windows Vista 32bit OS (Service Pack2 or later, any edition)
Windows 7 32bit/64bit OS (Service Pack1 or later, any edition)
Windows 8.0 32bit/64bit OS (any Service Pack, any edition)
Windows 8.1 32bit/64bit OS (any Service Pack, any edition)
Windows 10 32bit/64bit OS (Home, Pro, Enterprise)

Compatible Driver

YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet driver Ver. 1.12.00 or later
(To use MP3000 series, Ver. 1.17.02 or later is required.)

SHIBAURA MACHINE CO., LTD.(OLD: TOSHIBA MACHINE) TC Series (TCmini/TC200) driver Ver. 1.11.01 or later

SHIBAURA MACHINE CO., LTD. TC/TS Series Ethernet V1.11.00 or later

Data Copy Tool Version

Ver. 1.08.03

Ver. 1.03.03

Ver. 1.10.00

To check your version, go to the “MENU” screen on Device Data Copy tool.

Related Devices

MP2000 Series
MP3000 Series
Σ-7C controller section

TC200 Series
TC200S Series
TCmini Series

TS5000 Series
TCmini Series

Related Units

Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required Data Copy Tool versions for different models are listed below.

Model		YASKAWA MP Ethernet/MECHATROLINK Required tool version	SHIBAURA MACHINE CO., LTD. (OLD: TOSHIBA MACHINE) TC Series(TCmini/TC200) Required tool version	SHIBAURA MACHINE CO., LTD. TC/TS Series Ethernet TC/TS Series Ethernet Required tool version
GP3000 Series		Ver. 1.00.00 or later	Ver. 1.00.00 or later	－
LT3000 Series		Ver. 1.00.00 or later	Ver. 1.00.00 or later	－
GP4100 Series	GP4104	Ver. 1.01.00 or later	－	Ver. 1.00.00. or later
	GP4114	Ver. 1.07.03 or later	－	Ver. 1.00.00. or later
	GP4105、GP4106、GP4107	－	Ver. 1.00.01 or later	－
	GP4115、GP4116	－	Ver. 1.03.03 or later	－
GP4000M Series		Ver. 1.01.00 or later	Ver. 1.00.02 or later	Ver. 1.00.00. or later
GP4000 Series		Ver. 1.01.00 or later	Ver. 1.00.02 or later	Ver. 1.00.00. or later
LT4000M Series		Ver. 1.04.02 or later	Ver. 1.02.03 or later	Ver. 1.00.00. or later
SP5000 Series		Ver. 1.05.02 or later	Ver. 1.02.03 or later	Ver. 1.00.00. or later
SP5000X Series		Ver. 1.08.04 or later	Ver. 1.03.03 or later	Ver. 1.00.00. or later
GP4000E Series		Ver. 1.06.02 or later	Ver. 1.03.03 or later	Ver. 1.00.00. or later
IPC Series for WinGP		Ver. 1.10.00 or later	Ver. 1.00.00 or later	Ver. 1.00.00. or later
General PCs for WinGP		Ver. 1.10.00 or later	Ver. 1.00.00 or later	Ver. 1.00.00. or later

Updated Contents

[Ver. 1.08.03] (Dec. 15, 2016)

Sigma-7C is supported.( The Display communicates with the Σ-7C controller section.)

[Ver. 1.03.03] (Aug. 31, 2020)

The following settings were added:

Change in maker name. TOSHIBA MACHINE Co., Ltd. → SHIBAURA MACHINE CO., LTD.

[Ver. 1.00.00] (Mar. 23, 2021)

Update History

[Ver. 1.07.03] (Apr. 08, 2016)

Added support for individual transfer.

[Ver. 1.06.02] (Sep. 5, 2014)

Added support for new transfer files. (Maintenance Monitor Setting, FTP Client definition.)

[Ver. 1.05.02] (Aug. 22, 2012)

MPU-01, CPU201(SUB) are supported

[Ver. 1.04.02] (Apr. 6, 2012)

Compressed project file for MP2000 Series is supported.
The following issue is fixed: When a communication driver Ver. 1.16.02 or earlier is used, GP cannot operate normally.

[Ver. 1.03.01] (Mar. 9, 2012)

MP3000 Series is supported.
Compressed project file for MP3000 Series is supported.

The following issues are fixed:

Touch operator interface cannot dump files when referring to nonexistence diagrams on a program.
Returning to driver selection repeatedly in the menu screen may disable the touch operation.

[Ver. 1.01.00] (Jul. 27, 2010)

Selecting the register data transfer when loading is supported.
MECHATROLINK-III is supported.
GP4100 Series is supported
GP4000M Series is supported
GP4000 Series is supported.

[Ver. 1.00.00]

[Ver. 1.03.03] (Sep. 5, 2014)

Now supports VGA display.
* To use a VGA display Ver. 4.02.000 or later of GP-Pro EX is necessary.

[Ver. 1.02.03] (Mar. 9, 2012)

The following issues are fixed:

Although CPU stops when a data file is downloaded, the CPU stop confirmation message may be displayed.
Although CPU is in the RUN status when a data file is downloaded, download is performed without displaying the CPU stop confirmation message and the communication error may occur.

[Ver. 1.00.02]

GP4000 Series is supported.

The following issue is fixed:

If "Subroutine Command", "Task Command" and "Interrupt Command" are used for a ladder program, a sequence error occurs after data is transferred to a PLC.
When a ladder program is uploaded, data is read in a state where the L/H of the 3rd or later address values in the T/C setting value is reversed.

[Ver. 1.00.01]

GP4100 Series is supported.
GP4000M Series is supported.

[Ver. 1.00.00]

New

How to install (This is a self-extracting file.)

Please confirm that the applicable software is installed.
Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

Device Data Copy Tool

EXDriver_DataCopy_11.exe

242.08 MB (253,840,472 Byte)

YASKAWA Electric Corporation Device Data Copy Tool Guide

Manual_yas_tsee.pdf

501.10 kB (513,130 Byte)

TOSHIBA MACHINE CO., LTD. Device Data Copy Tool Guide

Manual_tsm_tsee.pdf

844.36 kB (864,624 Byte)

SHIBAURA MACHINE CO., LTD. Device Data Copy Tool Guide

Manual_sbm_tsee_en.pdf

764.07 kB (782,408 Byte)