[Communication Drivers] Fuji Electric Co.,Ltd. MICREX-SX Series Ethernet Driver

Details

Note:

Precautions for adding a new driver onto Windows Vista/7

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.

1. Click on the above file name to download the data to desired folder.
2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
3. After the installer starts, follow the instructions given on each screen.
4. After installation, execute GP-Pro EX.
5. Click on the Device/PLC area’s [Fuji Electric Co.,Ltd.] selection and select [MICREX-SX Series Ethernet].

When using the driver, be sure to refer to the Device Connection Manual PDF.
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

In case of using a project, created with a version below than V1.10.03

It is necessary to reallocate a variable to a real address when using variable data.

Instructions on how to reallocate to real address.

1. Open the project file with driver V1.10.03 or later, installed in GP-Pro EX.
2. Open the “Variable List” dialog from the Individual Device Settings.
3. Delete all of the worksheet(s) (This will delete all Variable Data)
4. Delete all Structure / Array (If there are Embedded Structures / 2D Arrays then the higher level must be deleted first.)
5. Import / Re-enter Structures / Arrays
6. Import / Re-enter Variables
7. Click OK to close dialog
8. Click OK to save new Variable Data

* Please don’t close the “Variable List” dialog while doing the procedures above. If the “Variable List” dialog is closed, the allocated variables to the parts in the screen will become “-Undefined-“.