[Communication Drivers] SHIBAURA MACHINE CO., LTD.(OLD: TOSHIBA MACHINE) TC Series(TCmini/TC200)

Summary

Last update:2020/8/31

Details

Note:
Precautions for adding a new driver onto Windows Vista/7
TitleSHIBAURA MACHINE CO., LTD.(OLD: TOSHIBA MACHINE) TC Series(TCmini/TC200)
VersionVer. 1.15.08
Applicable SoftwareGP-Pro EX Ver2.10.000 or later
Pro-Server EX Ver.1.30.000 or later

You can check your version by”Help”function→”Version Info”.
Related Devices
  • TC200 Series
  • TC200S Series
  • TCmini Series
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.

Required driver versions for different models are listed below
ModelRequired driver version
GP3000 SeriesVer. 1.10.00 or later
LT3000 SeriesVer. 1.14.03 or later
GP4100 SeriesGP4105、GP4106Ver. 1.12.01 or later
GP4115、GP4116Ver. 1.14.04 or later
GP4104：Ether (Ethernet Multilink only)Ver. 1.12.02 or later
GP4114：Ether (Ethernet Multilink only)Ver. 1.14.04 or later
GP4000M SeriesVer. 1.12.02 or later
GP4000 SeriesVer. 1.12.03 or later
LT4000M SeriesVer. 1.14.04 or later
SP5000 SeriesVer. 1.14.04 or later
SP5000X SeriesVer. 1.14.08 or later
IPC Series for WinGPVer. 1.10.00 or later
General PCs for WinGPVer. 1.10.00 or later
Device/PLC Connection ManualFor details, please read the "Device/PLC Connection Manual" in the lower part of this page.
For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)".
Updated Contents

[Ver. 1.15.08] (Aug. 31, 2020)

  • Change in maker name.
    TOSHIBA MACHINE Co., Ltd. -> SHIBAURA MACHINE CO., LTD.
 

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
  4. After installation, execute GP-Pro EX.
  5. Click on the Device/PLC area’s [SHIBAURA MACHINE CO., LTD.] selection and select [TC Series(TCmini/TC200)].
When using the driver, be sure to refer to the Device Connection Manual PDF.
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

document
Installer
EXDriver_TSMTC200.exe
937.41 kB (959,904 Byte)
document
Device/PLC Connection Manual
Manual_tsmtc200_en.pdf
2.98 MB (3,127,776 Byte)

更新履歴


[Ver. 1.15.08]  (Aug. 31, 2020)

  • Change in maker name.
    TOSHIBA MACHINE Co., Ltd. → SHIBAURA MACHINE CO., LTD.


[Ver. 1.14.06] 

The following issue was corrected:
  • When converting the project of GP-Pro PBIII, it could not be transmitted to the HMI.


[Ver. 1.14.05] 

The following settings were added:
  • GP-4G01 was supported.
    * To use a GP-4G01 Ver. 4.07.000 or later of GP-Pro EX are necessary.


[Ver. 1.14.04] 

The following issue was corrected:
  • When you try to make a communication using GP3000 series COM1 (2-wire), a cable disconnection error occurs, which disables communication.


[Ver. 1.14.03]

The following settings were added:
  • USB/RS-422/485 Conversion Adapter was supported.
    * To use a USB/RS-422/485 Conversion Adapter Ver. 3.00.000 or later of GP-Pro EX are necessary.


[Ver. 1.13.03](Oct. 4, 2011)

The following settings were added:
  • Pass-through is supported.


[Ver. 1.12.03]

  • The maker name was changed from “Shibaura Machine CO., LTD” to “Shibaura Machine CO., LTD”.


[Ver. 1.12.02]

The following settings were added:
  • GP4000M Series was supported.
    * To use a GP4000M Series Ver. 2.71.000 or later of GP-Pro EX are necessary.
  • GP4104 was supported.
    * To use a GP4104 (Ethernet Multilink) Ver. 2.70.000 or later of GP-Pro EX are necessary.
The following issue was corrected:
  • A problem has been corrected that the communication error occurs approximately every 49.71 days during communication with PLC in the case of continuous operation.


[Ver. 1.12.01]

The following settings were added:
  • GP4105, GP4106, GP4107 was supported.
    * To use a GP4105, GP4106, GP4107 Ver. 2.60.000 or later of GP-Pro EX are necessary.


[Ver. 1.11.01]

The driver name was changed from “PROVISOR TC200” to “TC Series (TCmini/TC200)”.

The following settings were added:
  • "Device Data Copy Tool"was supported.


[Ver. 1.10.00](Jun. 14, 2007)

New

    Copyright (C)1996- 2024 Schneider Electric Japan Holdings Ltd. All Rights Reserved.