NoteImportant
Posted: Apr. 3, 2015
Thank you very much for your continuous use of Pro-face products.
We have confirmed the following symptoms on YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver.
The symptom and corrective measures for this problem are indicated below
We sincerely apologize for any inconvenience this may cause you.
We have confirmed the following symptoms on YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver.
The symptom and corrective measures for this problem are indicated below
We sincerely apologize for any inconvenience this may cause you.
Symptom descriptions
When using YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver (Ver. 1.19.05), Device Data Copy Tool does not work.
Applicable combination of products
Communication Driver:| Driver Name | YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver *1 |
|---|---|
| Target Version | Ver. 1.19.05 |
| How to confirm the version | Confirmation the offline mode screen in HMI target |
*1 The driver is included in GP-Pro EX Ver. 4.03.000 or later.
Measures
Download and install the following module.
→YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver (Ver. 1.19.16 or later)
To download the module, free member registration for "Otasuke Pro!" is required.
→YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet Driver (Ver. 1.19.16 or later)
To download the module, free member registration for "Otasuke Pro!" is required.
Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.
For contact information, please refer to the "Inquiry" page.