Details
- Caution
- Precautions for adding a new driver onto Windows Vista or later
Precautions for adding a new driver at Daylight Saving Time
| Title | Rockwell Automation, Inc. EtherNet/IP Driver | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Version | Ver. 1.19.42 | ||||||||||||||||||||||||||||||||||
| Supported Software | The required versions of software for this driver installer are as follows. GP-Pro EX Ver. 2.10.000 or later Pro-Server EX Ver. 1.30.000 or later You can check your version by "Help" function -> "Version Info". | ||||||||||||||||||||||||||||||||||
| Supported Devices |
| ||||||||||||||||||||||||||||||||||
| Supported Units | Required versions depend on models. Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.
| ||||||||||||||||||||||||||||||||||
| Device/PLC Connection Manual | For details, please read the "Device/PLC Connection Manual" in the lower part of this page. For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual". | ||||||||||||||||||||||||||||||||||
| Updated Content |
[Ver. 1.19.42] (May 31, 2024) The following functions are supported:
|
How to install (This is a self-extracting file.)
- Prior to installation, be sure to close all software applications that are running.
-
- Click on the file name in the lower part of this page to start downloading the file.
- After download is complete, double-click on the downloaded file to start installation.
- Follow the instructions on the screen.
- After installation, start GP-Pro EX.
- Select [Rockwell Automation, Inc.] for "Manufacturer" and [EtherNet/IP] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update History
[Ver. 1.19.42] (May 31, 2024)
The following functions are supported:- Changed the RSLogix5000 software versions supported (Ver. 35 and earlier) by the L5K file import function.
- STRING16 and STRING32 data types are now supported for the "Control/Compact/Flex Logix Series Native" driver.
- Could not import if security encryption protection was set to the ADD_ONINSTRUCTION (AOI) data type.
- Sometimes could not correctly write to the Custom String data type.
[Ver. 1.19.41]
The following functions are supported:- Importing a Micro800 series CSV file failed sometimes.
[Ver. 1.19.40]
The following functions are supported:- Changed the RSLogix5000 software versions supported (Ver. 34 and earlier) by the L5K file import function.
[Ver. 1.19.39] (July. 1, 2022)
The following setting was added:- Supports simultaneous use with the "ODVA EtherNet / IP Target" driver.
[Ver. 1.19.38] (Apr 22, 2022)
The following problem was fixed:- Multiple Scopes were included in the tag duplication check at import.
- Memory leak may occur when the STRING type communicate to parts smaller than the registered data size when connecting to Micro800 Series.
[Ver. 1.19.37](May. 21, 2021)
The following setting was added:- The writing failed to STRING data type of undefined length if select “Control/Compact/Flex Logix Series Native”.
[Ver. 1.19.35](Jun. 22, 2020)
The following setting was added:- Support for Micro800 Series.
[Ver. 1.19.34](Jan. 21, 2020)
The following setting was added:- Support version of L5K import function is upgraded. (Support Ver. 32 or less.)
[Ver. 1.19.33]
The following setting was added:- Import sometimes failed when there was a line break between L5K file tag information
[Ver. 1.19.32] (Apr. 26, 2019)
The following setting was added:- The member of “Modules that generate controller tags or data type/structures on import” of L5K import function is added.
[Ver. 1.19.31] (Nov. 26, 2018)
The following setting was added:- Support version of L5K import function is upgraded. (Support Ver. 31 or less.)
[Ver. 1.19.30] (Jul. 30, 2018)
The following issue was corrected:- When re-importing the L5K file from the "Control / Compact / Flex Logix Series Native" series by "Edit" button, symbol names used for parts on the screen were sometimes changed to symbol names with different names or became "Undefined".
[Ver. 1.19.29] (Jun. 7, 2018)
The following issue was corrected:- Sometime the certain lamp on certain screen couldn't turn ON, if connecting to ControlLogix 5580 Controller.
[Ver. 1.19.26]
The following issue was corrected:- Sometimes the wrong value was read from BOOL type variables.
[Ver. 1.19.24]
The following issue was corrected:- Occasionally, the driver's scroll bar did not work properly.
[Ver. 1.19.22] (Dec. 25, 2014)
The following functionality has been added:- It allows configuring both Individual Device Settings of “ControlLogix/CompactLogix Series” and “Control/Compact/Flex Logix Series Native” to one physical target PLC when automatic port number allocation has been enabled.
[Ver. 1.19.21]
The following issue was corrected:- The project data created with a past version cannot be opened correctly.
[Ver. 1.19.20] (Apr. 25, 2013)
The following settings were added:- Support version of L5K import function is upgraded.(Support Ver. 20 or less.)
- UI setting of connection directly to CompactLogix is improved.
- The member of “Modules that generate controller tags or data type/structures on import” of L5K import function is added.
- When it uses project that has been created on Driver Version Ver. 1.11.04 or less, some address may be changed to illegal or undefined.
- The L5K import function that request a definition of “Modules that generate controller tags or data type/structures on import” may not be worked normal.
[Ver. 1.18.19]
The following settings were added:- LT3000 series was supported.
- Delimiter settings can be made when importing/exporting a CSV file.
- Array Tag cannot be specified normally.
- For saving a tag list as a file with the export function: When a file name with read-only properties is specified for a file name, abnormal termination occurs.
- A Japanese error message when Ethernet/IP L5K import is executed is not correct.
- When L5K is imported, an error occurs to a tag which should have been imported normally and one character is missing for the data type of the error log to be output.
[Ver. 1.17.18]
The following settings was added:- GP4104 was supported.
* To use a GP4104 Ver. 2.70.000 or later of GP-Pro EX are necessary.
- In offline screen, "TagData" is displayed only 31 characters.
[Ver. 1.16.17] (Dec. 21, 2010)
The following issues were corrected:- Some supported Modules that should generate controller tags or data type/structures on import did not appear.
- In the Input Address Dialog for editing the Address, GP-Pro EX may crash if user accepts the blank address.
- GP-Pro EX will crash when user selects the "-Unused-" filter option in the Data Type/Structure List.
- Arrays with dimensions of size 1 are not worked correctly.
[Ver. 1.16.16] (Jun. 29, 2010)
The following issue was corrected:- When use the address input dialog after re-import the L5K file included the Custom Defined String Data Type, GP-Pro EX may crash.
[Ver. 1.16.15] (Apr. 8, 2010)
The following settings were added:- Support RSLogix Custom Defined String Data Type as atomic data type in GP-Pro EX.
- Support RSLogix AOI data type importing from L5K file.
- Support of 1769-L23E-QB1, L23-QBFC1 and L23E-QBFC1 module type.
- L5K cannot be imported to GP-Pro EX on The mark of the decimal point is language OS of comma (,). (Norwegian OS etc, most of European languages and others).
- Cannot rename a data type.
- GP is connected to the PLC with two or more CPUs at the same chassis(Ethernet port connected with GP is one port).Then the GP may display an error message.
[Ver. 1.14.13]
The following issue was corrected:- When import the L5K included “PROGRAM DESCRIPTION”, GP-Pro EX will crash.
[Ver. 1.14.12]
The following setting was added:- Supported RSLogix5000 V17
- Cannot use the string tag in Pro-Server EX.
[Ver. 1.13.11] (Jan. 22, 2009)
The following settings were added:- Supported Program Scope tag
- Supported RSLogix5000 V13,V15, V16 (not include V17)
- Supported PreDefined Structures for RSLogix5000 V15, V16 (not include V17)
- Add Module Defined Structures
- Supported LINT data type
- Supported show tag count
- Supported CSV export tags (RSLogix format, ProEX format)
- Improve CSV import tool (Selection of import method is available at re-import.)
- Attempts to input a value to an out-of-range address using Pro-Server EX's device monitor may cause a freeze.
- In Pro-Server EX's device monitor, specifying bit addresses of T/C/R devices causes the values not to be displayed properly.
- When a CompactLogix series model is communicating with multiple display units, downloading the PLC's ladder program using the ladder software may cause a display unit to display the CIP connection error.
[Ver. 1.12.09]
The following issue was corrected:- The system error may occur in GP-3200/ST3000 series.
[Ver. 1.12.08] (May. 8, 2008)
The following issues were corrected:- Some tags do not write correctly to bit addresses in ControlLogix/CompactLogix Series Native.
- When you try to create the tag data exceeding the maximum limit (32 data), GP Pro-EX Editor is shut down.
[Ver. 1.12.07] (Oct. 30, 2007)
The following issue was corrected:- Bits do not write correctly in User Defined Structure with 8 or more Bools
[Ver. 1.12.06] (Oct. 1, 2007)
The following setting was added:- For ControlLogix/CompactLogix Series Native, supported import L5K files.
- For ControlLogix/CompactLogix Series Native, performed the reading performance gain of the device.
[Ver. 1.11.06] (May. 31, 2007)
The following issue was corrected:- When execute the Device Monitor with other driver form Pro-Server EX, GP3000 had rebooted.
[Ver. 1.11.05] (Apr. 16, 2007)
The following setting was added:- Support for DeviceMonitor
*Except ControlLogix/CompactLogix Series Native.
*Ver 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.
- For ControlLogix/CompactLogix Series Native, when the address string more than 255 character, GP-Pro EX hanged up.
- For ControlLogix/CompactLogix Series Native, when write to BOOL array, GP3000 write to illegal address of PLC device.
[Ver. 1.11.04] (Jan. 9, 2007)
The following issue was corrected:- It becomes an unjust value when you perform reading of Float device.
[Ver. 1.11.03] (Nov. 28, 2006)
The following setting was added:- Expanded upper limit size of IOI file (DataTag definition file) of a ControlLogix/CompactLogix Series Native in 512KByte.
- You cannot delete User Defined Structure which made with a ControlLogix/CompactLogix Series Native.
- Time hung till an address input dialog was displayed when there were a lot of structure tags with a ControlLogix/CompactLogix series native.
[Ver. 1.11.02] (Aug. 1, 2006)
The following setting was added:- Support for ControlLogix/CompactLogix Series Native.