Summary
Last update: Nov. 27, 2015
Related Devices
- KV-700 Series
- KV-1000 Series
- KV-3000 Series
- KV-5000 Series
- KV-5500 Series
- KV-7000 Series
- KV-Nano Series
Related Units
| Model | Required driver version |
|---|---|
| GP3000 Series | Ver. 1.10.01 or later |
| ST3000 Series | Ver. 1.11.01 or later |
| LT3000 Series | Ver. 1.15.05 or later |
| GP4100 Series (GP4104: Ethernet Multilink only) | Ver. 1.14.03 or later |
| GP4100 Series (GP4105, GP4106) | Ver. 1.14.02 or later |
| GP4100 Series (GP4107) | Ver. 1.16.06 or later |
| GP4000M Series | Ver. 1.14.03 or later |
| GP4000 Series | Ver. 1.14.04 or later |
| LT4000M Series | Ver. 1.15.06 or later |
| SP5000 Series | Ver. 1.15.06 or later |
| IPC Series for WinGP | Ver. 1.11.01 or later |
| General PCs for WinGP | Ver. 1.11.01 or later |
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update History
[Ver. 1.16.06] (Nov. 27, 2015)
The following functionalities were added.- KV-7000 Series Support
- KV-Nano Series Support
[Ver. 1.15.06] (Jul. 27, 2012)
The following functionalities were added.- LT3000 Support
- USB-Serial (RS-422/485) Conversion Adapter Support
[Ver. 1.14.06] (Feb. 17, 2012)
The following issues were corrected:- If "38400" or more is specified in the pass-through function, communication may not be made normally.
- When the pass-through function is used via Ethernet, connection to PLC cannot be made.
[Ver. 1.14.05]
The following issue was corrected:- A device comment cannot be transferred via the pass-through function.
[Ver. 1.14.04]
The following setting was added:- GP4000 Series were supported.
* GP-Pro EX Ver. 3.00.000 or later is necessary to use GP4000 Series.
- When the program development tool is left online for long hours in the use
of pass-through function, the communication error may occur.
[Ver. 1.14.03]
The following settings were added:- GP4000M Series were supported.
* GP-Pro EX Ver. 2.71.000 or later is necessary to use GP4000M Series.
- GP-4104 was supported.
* GP-Pro EX Ver. 2.70.000 or later is necessary to use GP-4104 (Ethernet Multilink).
- Reading 126 or more inconsecutive addresses of ZF device may cause a communication error.
[Ver. 1.14.02]
The following setting was added:- GP-4105 and GP-4106 were supported.
* GP-Pro EX Ver. 2.60.000 or later is necessary to use GP-4105 or GP-4106.
[Ver. 1.13.02] (Oct. 16, 2008)
The following setting was added:- Support for Pass-through.
[Ver. 1.12.02] (Aug. 21, 2008)
The following issue was corrected:- When the KV-700/1000 series is selected, the address of an Input Relay / Output Relay / Internal Auxiliary Relay cannot be correctly set.
[Ver. 1.12.01] (Mar. 17, 2008)
The following settings were added:- KV-3000Series/KV-5000 Series are supported.
- The driver name is changed to "KV-700/1000/3000/5000 CPU Direct".
[Ver. 1.11.01] (Oct. 31, 2007)
The The following setting was added:- Support for Device Monitor
* GP-Pro EX Ver. 2.00.000 or later is necessary to use a Device Monitor.