Summary
Last update: Jan. 17, 2014
Related Devices
- MELSEC FX Series
Related Units
- GP3000 Series
- LT3000 Series
- GP4100 Series (GP-4105, GP-4106: GP-Pro EX Ver. 2.60.000 or later)
- GP-4104 (Ethernet Multilink only: GP-Pro EX Ver. 2.70.000 or later.)
- GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
- GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
- IPC Series for WinGP
- General PCs for WinGP
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update History
[Ver. 1.13.01] (Mar. 29, 2010)
The following setting was added- Supported Serial Multilink function.
* Ver. 2.50.000 or later version of GP-Pro EX is necessary to use a Serial Multilink function
[Ver. 1.16.09] (Jan. 17, 2014)
The following setting was added:- FX3S Series is supported.
[Ver. 1.15.09]
The following issue was corrected:- When the communication type settings for GP4201T and GP4301TM are different from those of the connected devices and further the time synchronization setting is specified, the screen may be locked during the startup.
[Ver. 1.15.08]
The following setting was added:- LT3000 Series is supported.
[Ver. 1.14.08]
The following setting was added:- GP4000 Series is supported.
*GP-Pro EX Ver. 3.00.000 or later is necessary to use a GP4000 Series.
- When "19200" is specified for Communication Speed in GP4100 series:
Using the clock update function at the Display Unit's startup causes the communication error.
[Ver. 1.14.07]
The following settings were added:- GP4100 Series is supported.
*GP-Pro EX Ver. 2.60.000 or later is necessary to use a GP4106 or GP4107
*GP-Pro EX Ver. 2.70.000 or later is necessary to use a GP4104 (Ethernet Multilink). - GP4000M Series is supported.
*To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.
[Ver. 1.13.07] (Dec. 28, 2008)
The following setting was added:- FX3G Series is supported.
[Ver. 1.12.07] (Jun. 18, 2008)
The following issues were corrected:- When use Device Monitor, The address length error cannot be detected. The display doesn't change into "*".
- When GP was powered ON. The SIO error is mis-detected.
- When Flow Control is "NONE" GP cannot be communicated.
- When PLC is reactivated while GP is communicating. GP cannot be communicated.
- When connecting with FX1S, FX0N, FX0S and GP starts, the address length error is mis-detected.
[Ver. 1.12.06] (Nov. 5, 2007)
The following issue was corrected:- When connecting with FX3U, FX3UC and GP starts, the address length error is mis-detected.
[Ver. 1.12.05] (May. 31, 2007)
The following issues were corrected:- When communication is not established, an error is not displayed.
- GP cannot communicate with FX1CPU.
- Pass-through is supported.
[Ver. 1.11.04] (Jan. 9, 2007)
The following setting was added:- Support for Device Monitor
*Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.