Summary
Last update: Feb. 8, 2018
Related Devices
- MELSEC QnA Series
Related Units
| Model | Required driver version |
|---|---|
| GP3000 Series | Ver. 1.00.01 or later |
| LT3000 Series | Ver. 1.14.03 or later |
| GP4100 Series (GP4105, GP4106) | Ver. 1.13.03 or later |
| GP4100 Series (GP4104: Ethernet Multilink only) | Ver. 1.13.03 or later |
| GP4100 Series (GP4115, GP4116) | Ver. 1.14.03 or later |
| GP4100 Series (GP4114: Ethernet Multilink only) | Ver. 1.14.03 or later |
| GP4000M Series | Ver. 1.13.03 or later |
| GP4000 Series | Ver. 1.13.03 or later |
| SP5000 Series | Ver. 1.14.03 or later |
| IPC Series for WinGP | Ver. 1.12.03 or later |
| General PCs for WinGP | Ver. 1.12.03 or later |
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update History
[Ver. 1.14.08] (Feb. 8, 2018)
The following issue was corrected:- In GP-4G01, there was a case that a communication error occurred in the HMI of the existing system.
[Ver. 1.14.05]
The following issue was corrected:- When converting the project of GP-Pro PBIII, it could not be transmitted to the HMI.
[Ver. 1.14.04]
The following setting was added:- GP-4G01 is supported.
*Ver. 4.07.000 or later of GP-Pro EX are necessary to use a GP-4G01.
[Ver. 1.14.03]
The following setting was added:- LT3000 Series is supported.
[Ver. 1.13.03]
The following setting was added:- GP4100 Series (GP4105, GP4106)
*Ver. 2.60.000 or later of GP-Pro EX are necessary to use GP4105 or GP4106.
[Ver. 1.12.03]
The following setting was added:- Support for Device Monitor.
*Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.
- The value of Timer Contact or Timer Coil was not always correctly displayed.
[Ver. 1.10.02]
The following setting was added:- Pass-through is supported.