PFXZCGEUUE1

Standard product information
Specification

Standard product information

Family

Peripheral Equipment

Series

EZ Series

Model

PFXZCGEUUE1

Global Code

PFXZCGEUUE1

Product Features

USB option (Add a LAN port)

Specification

Specifications

General Specifications
Electrical Specifications
Environmental Specifications
External Specifications
External Dimensions

EZ LAN Adapter

General Specifications

Model	PFXZCGEUUE1
Supported standards and regulations
Supported software	GP-Pro EX Ver. 4.08 or later
Ethernet I/F	Modular Jack (RJ-45), IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX
USB I/F	Type A (plug), USB 2.0 High-Speed (480Mbps)

Electrical Specifications

Power Supply
Rated input voltage	5Vdc (powered from USB bus)
Input voltage limits	4.75 to 5.25Vdc
Power consumption	0.63W or less

Environmental Specifications

Physical environment
Ambient air operating temperature	0 to 55℃ (32 to 131 °F)
Storage temperature	-20 to 60℃ (-4 to 140 °F)
Ambient air and storage humidity	10 to 90% RH (non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust	0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)
Pollution degree	For use in Pollution Degree 2 environment
Atmospheric pressure (Operating altitude)	800 to 1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical environment
Vibration resistance	IEC/EN 61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm (0.14 in) 9 to 150 Hz Fixed acceleration: 9.8 m/s² X, Y, Z directions for 10 cycles (approximately 100 minutes)
Concussion resistance	IEC/EN 61131-2 compliant (147 m/s², X, Y, Z directions for 3 times)
Electrical environment
Electrical fast transient/burst	IEC 61000-4-4 2 kV: Power port (display unit) 1 kV: Signal ports
Electrostatic discharge immunity	Contact Discharge Method: 6 kV Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)

External Specifications

External dimensions	W105 x H40 x D27 mm (W4.13 x H1.57 x D1.06 in.)
Cable length	0.5 m (1.64 ft) (including connections)
Weight	100 g (0.22 lb.) or less

External Dimensions

* This product can be attached on the rear side of the display unit or to a panel other than the display unit. Refer to the installation guide for further information.