{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}{}{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Did this answer your question?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}STW6000 / Could you tell me the features that can be configured on a browser?
The features that can be configured on a browser are as follows;
For more information, please refer to "STW6000 Series Hardware Manual", Chapter 7.
Screen
| Brightness | Adjusts the brightness, from 1 (bright) to 16 (dark). The default setting is [1]. |
| Screen Saver | Set up the screen saver status for when the time defined in Timer elapses. Thedefault setting is [None]. None: No screen saver. Backlight Off: Turn off the backlight. |
| Timer | Enter the amount of time from the last screen input until the screen saver starts up. You can enter from 1 to 30 minutes. |
Interface
| Buzzer | Enable or disable the buzzer that sounds when you perform touch-panel operations. The default setting is [Enable]. |
| Touch Calibration | If [Enable] is selected, when this product restarts the calibration setting screen appears. Follow the instructions on the screen to run calibration. After calibration is complete, this product restarts. The default setting is [Disable]. |
| Keyboard Type | Select the USB keyboard type. The default setting is [101]. 101: Alphanumeric keyboard 106: Japanese input keyboard |
Boot
| Mode | Set up the screen status at startup. To define an image, select [Image], for no image display select [None]. The default setting is [Image]. |
| Data | When Mode is set to [Image], touch Load to select the image to display from USB storage. The image must meet the following criteria. File size: Maximum 12 MB File format: png Image resolution: Maximum 2048 x 2048. Create the image with a resolution that matches the display resolution. NOTE: Requires saving the image with the file name “BootImg.png” to the root folder in USB storage. |
| Delay Time | Enter the time until the page defined in Server → Start Page (see page 85) is displayed after this product restarts. You can enter from 0 to 60 seconds. By setting the Delay Time, you can show the startup status until the Web server is running. |
| Show Progress Bar | Enable or disable the progress bar displayed during screen startup. The default setting is [Enable]. |
Server
| Start Page | Select the Web server screen that appears at startup. The default setting is [Configuration]. |
| Server list | Register Web servers of devices connected to the same Intranet. You can register up to 10 Web servers. Name: Maximum 32 characters URL: Maximum 256 characters Software keyboard: Enable or disable the software keyboard. NOTE: HTTPS communication is not supported. |
Network
| DHCP | Select [Enable] to automatically get the IP address for this product from a DHCP server on the same Intranet. To specify a static IP address, select [Disable]. The default setting is [Disable]. |
| IP Address Subnet Mask | Set the static IP address and subnet mask. With these settings, the product’s network address and the Intranet network address must be the same. Example (bold text indicates numbers that are the same) Intranet Network Address: 192.168.0.0 Subnet Mask: 255.255.255.0 STW6000 Series IP Address: 192.168.0.100 Subnet Mask: 255.255.255.0 External Device IP Address: 192.168.0.101 Subnet Mask: 255.255.255.0 |
| Default Gateway | Enter the IP address of the default gateway. |
| DNS Settings DNS Server | Sets up how to get the IP address from the DNS server. When [Auto] is selected, the IP address is automatically defined. When [Manual] is selected, enter the DNS server IP address in the DNS Server field. The default setting is [Manual]. NOTE: When you want to select [Auto], first set DHCP to [Enable]. |
| MAC Address | Displays the MAC address on the product. |
System
| Password | For changing the password. The types of characters you can use are as shown below. Spaces are not allowed. Number of characters: 6 or more, up to 32 Available characters Lowercase letters: a to z Uppercase letters: A to Z Numbers: 0 to 9 Characters: - _ NOTE: Do not lose the password. If you lose the password, contact customer support for assistance. |
| Load Default | Returns to the factory default settings. NOTE: The password and startup image set up in the Boot screen are not affected. |
| Backup Configuration | Save the settings to USB storage. Insert storage to the USB (Type A) port, and touch this button. The settings are saved with the file name “WTCONF0D.DAT” to the root folder in USB storage. |
| Restore Configuration | Restores the settings saved on USB storage. Insert storage to the USB (Type A) port, and touch this button. Requires settings be saved with the file name “WTCONF0D.DAT” to the root folder in USB storage. |
| Update System | Updates the system with the system file saved on USB storage. You can download the latest system files from our website. http://www.pro-face.com/trans/en/manual/1001.html The following are the system update files. WEBOS0D.SYS, BOOTLD0D.SYS These files should be stored at the root folder in USB storage. |
Login Statistics
| Current Usage | Displays the accumulated time from when you first turned on the product to your current log in to the Configuration Menu. |
| Previous Usage | Displays the accumulated time from when you first turned on the product to the time you previously logged in to the Configuration Menu. |
| No. of failed login | Displays the number of unsuccessful login attempts from the last successful login to this login. |
| Export Log Data | Saves log data. Attach the storage device to the USB (Type A) port and touch the button. Exported log data is saved to the root folder in USB storage as “WTLOG0D.CSV”. |
| Check Export Log Data | Log data saved to USB storage includes code to prevent falsifying data. Touch this button to check if the exported log data has been tampered with. [Good] displays when there has been no data tampering. [Invalid] displays when there may have been some data tampering. You may have to check on how data is managed at your company. |
Information
| Version/Network/License information | Displays the system version of this product, network information such as the IP address, and license information of the software used in the product. |
For more information, please refer to "STW6000 Series Hardware Manual", Chapter 7.