*****************************   GP-Pro EX Ver.4.07  ****************************
                                                                        Oct 2017
                                                 Digital Electronics Corporation

Preface

Thank you for using GP-Pro EX.
GP-Pro EX is software to create logic programs and screen data for graphical 
operation touch panels.
The Windows environment ensures operability and high performance.
Please visit the Pro-face website (http://www.pro-face.com/) for the latest
information.

Table of Contents
(0) Version
(1) New Features List
 = V4.07.300 =====
 1-1 Support of New Features
 = V4.07.200 =====
 1-1 Support of New Features
 = V4.07.100 =====
 1-1 Support of New Features
 = V4.07.000 =====
 1-1 Support of New Features
 = V4.06.300 =====
 1-1 Support of New Features
 = V4.06.100 =====
 1-1 Support of New Features
 = V4.06.000 =====
 1-1 Support of New Features
 = V4.05.100 =====
 1-1 Support of New Features
 = V4.05.000 =====
 1-1 Support of New Features
 = V4.04.000 =====
 1-1 Support of New Features
 = V4.03.300 =====
 1-1 Support of New Features
 = V4.03.100 =====
 1-1 Support of New Features
 = V4.03.000 =====
 1-1 Support of New Features
 = V4.02.000 =====
 1-1 Support of New Features
 = V4.01.000 =====
 1-1 Support of New Features
 = V4.00.000 =====
 1-1 Support of New Features
(2) Limitations
 2-1 Editor
 2-2 Display Unit
 2-3 Device/PLC
 2-4 WinGP
 2-5 Pro-face Remote HMI Server
(3) When Serial No. and License Key Code are not input
(4) Installation and Uninstallation
 4-1 Installation
 4-2 Uninstallation
(5) User Registration
(6) Manuals
(7) Fixed Defects
 = V4.07.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.101 =====
 7-1 Display Unit
 = V4.07.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.000 =====
 7-1 Installation
 7-2 Editor
 7-3 Display Unit
 7-4 Device/PLC
 = V4.06.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.101 =====
 7-1 Installation
 = V4.06.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.05.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.05.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.04.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.04.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.400 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.300 =====
 7-1 Display Unit
 = V4.03.200 =====
 7-1 Editor
 7-2 Display Unit
 = V4.03.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.03.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.02.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.01.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.00.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC

Contents
================================================================================
(0) Version
 Editor:               Ver.4.07.300
 System/Runtime:       Ver.4.7.30
 Sub-system/OS Core:   Ver.4.7.30 (SP5B10, GP4000 series
                                   except for GP4000M series, GP410* series)
                       Ver.1.2.7  (LT4000 series)
                       Ver.1.3.4  (GP4000M series)
                       Ver.1.1.3  (GP-4104)
                       Ver.1.3.5  (GP-4105, GP-4106, GP-4107)
                       Ver.3.6.5  (GP3400 series, GP3500 series, GP3600 series, 
                                   GP3700 series)
                       Ver.3.6.0  (ST3000 series, GP-3200 series, AGP3310HT,
                                   AGP3300HS/HL)
                       Ver.3.6.3  (LT-3300 series, AGP3300T/U/S/L, AGP3301S/L)
                       Ver.3.5.1  (Other than above models)
 Memory Loader:        Ver.4.7.30

(1) New Features List
 = V4.07.300 ===================================================================
 1-1 Support of New Feature
  <Supported models>
   - The SP5000 Series Open Box (SP-5B41) and Power Box (SP-5B10) now support
     the following display modules:
      -  SP-5700WC iFWXGA)
      -  SP-5800WC iFWXGA)
   - The following display modules now support VM Unit(GP3000-VM01) and
     RGB Input Unit(GP3000-RGB201):
      -  GP-4621T
      -  GP-4521T
   - The following model is now supported.
      -  GP-4115T3
  <Communication Driver>
     -Siemens AG TIA Portal Ethernet
       - TIA Portal V14 is now supported.

 = V4.07.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4200 Series and GP4300 Series.
  <NEW functionality>
   - SP5000 Series Power Box (SP5B10) now supports I/O driver listed below.
      -  FLEXNETWORK
      -  CANopen

 = V4.07.100 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4400 Series, GP4500 Series, and
     GP4600 Series.
  <NEW functionality>
   - Pro-face Connect is now supported.
  <Communication Driver>
   - Newly-added communication driver 
     The following features supported.
     YASKAWA INFORMATION SYSTEMS MMCloud TCP Client.

 = V4.07.000 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - GP-4G01 is now supported.
   - SP5000 Series Open Box (SP-5B41) is now supported.

  <Sampling>
   - You can now append the date and time to sampling CSV file names.
   - You can now transfer sampling CSV files to a FTP server.

 = V4.06.300 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - DC Power Supply Adapter for SP5000 Series Open Box is now supported.

  <Simulation>
   - External PLC simulator now supports GX-Works2/GX-Works3.

  <Communication Driver>
   - Function version upgraded communication driver
     The following features supported
     - Siemens AG TIA Portal Ethernet
       - The following settings were added
         - SP5000 Series
         - GP4000 Series
         - GP4100 Series(GP4114)
     -PROFIBUS International PROFIBUS DP Slave
       - SP5000 Series(SP-5B10)
     -OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Tag search
       - Remove array item number zero limitation
       - Support LREAL Tag type (Convert to 32 bits Float type) (Only NJ Series)
     -YASKAWA Electric Corporation INVERTER/SERVO SIO
       - Support GA700 Series
     -YASKAWA Electric Corporation MP Ethernet/MECHATROLINK
       - Support Sigma-7C
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - Expand MR device address(Max MR999 to MR3999) for KV-7500 CPU.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet(SLMP Client)
       - Passed CC-Link Certification
       - Support iQ-R New CPU
       - Support other station access command
       - Changed driver name (Added [SLMP Client])

  <Others>
   - WinGP now supports Windows 10.

 = V4.06.100 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - SP5000 Series Open Box (SP5B40) now supports the following display modules:
     - SP-5600TP  SVGA (800*600)
     - SP-5660TP  SVGA (800*600)
     - SP-5700TP  SVGA (800*600)
  <NEW functionality>
   - SP5000 Series Power Box (SP-5B10) now supports display modules with 9-point
     calibration settings.
  <Editor>
   - The [Do not transfer all if no change in project] option is now available
     in the [Save as] dialog box.
  <Enhanced Recipe>
   - You can now use system variables to check the recipe label of enhanced
     recipes.
  <Transfer Tool>
   - You can now edit a display unit's [Ethernet] settings from
     the Transfer Tool.
  <Others>
   - You can now use system variables to check the project file name.

 = V4.06.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - GP-4311HT is now supported.

 = V4.05.100 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - On the Open Box, you can now use WinGP to check the status of 
     the operating system's Enhanced Writer Filter (EWF).

 = V4.05.000 ===================================================================
 1-1 Support of New Features
  <Supported models>
   - The following 3 models are now supported.
     - GP-4114T
     - GP-4115T
     - GP-4116T

  <Pro-face Remote HMI>
   - You can now use the device/PLC to change screens on Remote HMI (client) set
     to asynchronous mode.

  <Communication Driver>
   - Function version upgraded communication driver
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Pass-Through function supported.
     - YASKAWA Electric Corporation MP Ethernet/MECHATROLINK Driver
       - The driver name changed from "MP/INVERTER/SERVO Ethernet" to
         "MP Ethernet/MECHATROLINK".
       - R7G4HML3-LC2 of M-System Co., Ltd now supported.
       - K1G of Azbil Corporation now supported.
     - Cognex Corporation In-Sight Vision Systems
       - In-Sight 7000 now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
       - KV-7000/KV-Nano Series now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - KV-7000/KV-Nano Series now supported.

  <Others>
   - PS-5000, PS/PE-4*00 series and PC/AT now support portrait orientation.
   - The following products now run on Windows 10.
     - GP-Pro EX (screen editor)
     - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - Device Data Copy Tool
     - Pro-face Remote HMI Server
     - GP-Viewer EX

 = V4.04.000 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - WinGP now supports True Colors for Image and JPEG files.
   - WinGP now supports high resolution for PS-5000, PS/PE-4*00 series 
     and PC/AT.
   - The Project Converter now supports LT3300T.
   - You can now enter the GP-Viewer EX key code from the Transfer Tool.
   - WinGP now supports PS-5000 series.
   
  <Others>
   - WinGP SDK now runs on Microsoft .Net Framework 4.0.
   
  <Communication Driver>
   - Newly-added communication driver 
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
     - Panasonic Industrial Devices SUNX MEWTOCOL7-COM Ethernet
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Custom Explicit now supports "Get Attribute Single" Service (0x0e) and
         "Set Attribute Single" Service (0x10).
     - Azbil Corporation Controller (CPL)
       - Burner Controller BC-R series now supported.
     - Mitsubishi Electric Corporation Q/QnA Series Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Mitsubishi Electric Corporation Q Series QnU CPU Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Rockwell Automation, Inc. EtherNet/IP
       - When automatic port number allocation is enabled, you can now configure
         Individual Device Settings to one physical target PLC for both the 
         "ControlLogix/CompactLogix Series" and 
         "Control/Compact/Flex Logix Series Native".
     - JTEKT Corporation TOYOPUC CMP-LINK SIO
       - PC10G-CPU now supported.
       - PC3JG-CPU's EB device now supported.
     - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
       - PC3JG-CPU's EB device now supported.
       - Relay communication now supported.
     - Azbil Corporation MODBUS SIO Master
       - Series name change from KG to K1G.
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - AMS NetID setting now supported in offline mode.
     - Pass-Through Function Setting Tool
       - Timeout setting now supported.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Label import function now supported (iQ-R series only).
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
       - Change in maker name.
         Panasonic Electric Works SUNX Co., Ltd. 
         -> Panasonic Industrial Devices SUNX
     - Seiko Epson Corporation Remote Ethernet
       - A new device now supported.
     - Siemens AG SIMATIC S7 MPI Direct
       - Tag import dialog box now improved.
     - Siemens AG SIMATIC S7 Ethernet
       - Tag import dialog box now improved.

 = V4.03.300 ===================================================================
 1-1 Support of New Features
  <Others>
   - GP4000 series (except for GP4100 series, GP-4201TM and GP-4301TM)
     supported compatible parts for stable service.
 = V4.03.100 ===================================================================
 1-1 Support of New Features
  <Device/Option Support>
   - You can now expand the user screen area in AGP-3560T.
 
 = V4.03.000 ===================================================================
 1-1 Support of New Features
  <Enhanced Recipe>
   - You can now check search results from a recipe list part by using system 
     variables.
   - You can now use a system variable to copy, save, and reload recipes. 
   - You can now receive recipe labels.

  <Runtime Improvements>
   - The File Manager can now use the Remove DEL Key feature with CF/SD cards.

  <Pro-face Remote HMI>
   - Pro-face Remote HMI is now available in WinGP.
   - Pro-face Remote HMI now supports multiple client connections.

  <Communication Driver>
   - Function version upgraded communication driver
     - OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Added support for double-byte characters on the NJ series.
     - YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet
       - Sigma-7 series is supported.

 = V4.02.000 ===================================================================
 1-1 Support of New Features
  <Pro-face Remote HMI Server>
   - In the Common Settings, you can now set up [No timeout] for the timeout
     time.

  <Pro-face Remote HMI>
   - In the Common Settings, you can now set up [No timeout] for the timeout 
     time.
   - When communication is unstable, you can now define a timer for terminating
     the connection.

  <NEW functionality>
   - When using the Start application command, you now have the option to 
     suppress WinGP CPU usage.

  <Communication Driver>
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Implicit messaging now supported.
       - Custom Explicit message now supported.
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200) Device Data Copy Tool
       - Now supports VGA display.
     - YASKAWA Electric Corporation MEMOBUS Ethernet Device Data Copy Tool
       - Added support for new transfer files. (Maintenance Monitor Setting, 
         FTP Client definition.)

  <Others>
   - The following products now run on Windows 8.1.
     - GP-Pro EX (screen editor)
       - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - WinGP
     - WinGP SDK
     - Device Data Copy Tool
   - Open Box (SP5B40) models now support portrait orientation.
   - The following now support VGA display:
     - SP5000 series
         (Box Module)
           - SP-5B10
         (Display Module)
           - SP-5500TP
           - SP-5600TP
           - SP-5660TP
           - SP-5700TP

 = V4.01.000 ===================================================================
 1-1 Support of New Features
  <Editor Improvements>
   - You can now import the recipe data of enhanced recipes.

  <Runtime Improvements>
   - Importing/exporting enhanced recipes
    You can now import and export element labels and recipe labels. 
   - Enhanced recipe search
    You can now use system variables to search for enhanced recipes.
   - Mapped address
    You can now edit enhanced recipe element values on the device/PLC.
   - Send options
    When transferring an enhanced recipe to a device/PLC, you can write 
    the enhanced recipe's label and ID to the defined address. 

  <Communication Driver>
   - Function version upgraded communication driver
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - Support TwinCAT3.
       - Reading a large number of array elements has been optimized.


 = V4.00.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - The following models are now supported:
     - GP-4000M (Rear Modular Type)
     - SP5000 series
         (Box Module)
           - SP-5B10
           - SP-5B40
         (Display Module)
           - SP-5400WA WVGA(800*480)
           - SP-5500WA WXGA(1280*800)
           - SP-5500TP SVGA(800*600)
           - SP-5600TP XGA(1024*768)
           - SP-5660TP XGA(1024*768)
           - SP-5600WA WXGA(1280*800)
           - SP-5700TP XGA(1024*768)

  <Pro-face Remote HMI>
   - Pro-face Remote HMI Server function is now supported.
   - Pro-face Remote HMI function is now supported on the SP5000 Series.
   - Pro-face Remote HMI function is now supported on the GP-4000M Series.
   - Server list screen now supports monitoring triggered alarms.

  <Editor Improvements>
   - You can now create a project using
     [Create Project From Configuration File (Pro-face Device Configurator)].
     
  <Communication Driver>
   - Newly-added communication driver 
     - CoDeSys Automation Alliance CoDeSys Ethernet
     - CoDeSys Automation Alliance CoDeSys SIO
     - Control Techniques MODBUS SIO Master
     - Control Techniques MODBUS TCP Master
     - IEC Standard IEC 60870-5-101
     - Siemens AG Ethernet Gateway MPI/PROFIBUS
   - Function version upgraded communication driver
       - Mitsubishi Electric Corporation FX Series CPU Direct
           The following setting was added: 
             FX3S Series is supported.


(2) Limitations
 2-1 Editor
  <Screen Editor>
   - If you use many image fonts, it may take longer to open projects, change
     registered characters for the image font, and edit text.
   - #H_ScanOffControl does not appear in the Address and Cross Reference
     windows.
   - When the screen editor language setting and the font set do not match,
     pasting of parts may not work with the Cut and Paste commands.
     When that happens, use the Copy and Paste commands.
   - If you use the version reverter on a project set up with a sampling group
     associated with consecutive addresses and sampling words of 2 or more, 
     the project may not be converted or the sampling settings may be deleted.
   - Sometimes dragging parts from one screen editor and dropping to another
     does not produce a copy.
  <Graph>
   - If you draw an XY Historical Trend Graph or XY Data Block Graph on
     base screen 9000 or higher, the graph display area will not appear on
     the display unit nor in simulation.
  <Project Comparison Tool>
   - Comparison result of [Device/PLC settings] may appear as "Different"
     though project files have same [Device/PLC] Settings.

 2-2 Display Unit
  (Runtime)
  <USB Device>
   - When a USB device is inserted/removed, all USB devices may not become 
     disabled under the condition that five or more USB devices are connected 
     at the same time using the USB HUB in GP-4000 series. 
     If this phenomenon occurs, reset the Display.
  <Data Display>
   - When two or more Data Displays with "Indirect" specified are made to be 
     invisible at the same time while displaying a pop-up keypad, some Data 
     Display may not be invisible.
  <RPA>
   - A keypad is closed while the [Alt] key on the keypad of the RPA 
     Window Display is held down. When the keypad is opened next time, 
     the [Alt] key remains held down.
  <USB/SIO>
   - Do not use a logic program during communication with a Device/PLC using 
     a USB/SIO (RS422/485).
     If the logic program is used in the situation, a communication error 
     may occur.
  <Online Monitor>
   - If you set an integer operand for an OUT instruction, and
     you use the online monitor to forcibly pass power, 
     logic may not operate properly.
  <Logic Program>
   - In GP4000 series (except for GP-4100 series) and LT4000 series, the buzzer 
     sound in Ver. 3.5 is different from that in Ver. lower than 3.5.
   - While logic is stopped on the GP-4G01, if you press and hold down
     both the [USB1] and [SD] removal switches at the same time, 
     the [PWR] LED lights start flashing irregularly.
  <EZ Fingerprint Recognition Unit>
   - Do not attach/detach the fingerprint authentication unit while turning on
     the power to the Display. Doing so, inconsistency occurs between the
     security data and the fingerprint data and the display of the
     authentication and the password setting may not operate normally. 
     If an inconsistency occurs between them due to attachment/detachment of the
     fingerprint authentication unit, update the fingerprint data of the
     fingerprint authentication unit using the "Update DB" function.
  <Screen Transfer>
   - Do not attach/detach the transfer cable while transferring to the SP5000 
     Series Open Box (SP-5B40). Even if the cable is detached, the unit will not
     detect an error.
   - On the Power Box(SP-5B10) of the SP5000 series, In the case of forced 
     transfer mode, you cannot transfer using LAN2.
   - If the project is large and many functions are set up, the display unit
     may restart repeatedly after transfer.
   - If change models of project data to SP5000 Series Open Box,
     screen transfer may not be able to transfer.
  <Bit Momentary Switch>
   - Compared to other series, the buzzer for the Open Box's (SP-5B40) Bit 
     Momentary switch sounds different.
  <System Menu>
   - The Windows task bar flickers if you continually trigger the system menu's
     display operation (simultaneously touch the top-right and bottom-left
     corners) on the SP5000 series Open Box (SP-5B40).
   - On models that support 2-point touch, while the first touch is initiated
     and you work with the system menu, system menu operations may not work.
     Display the system menu again and menu operations become available.
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), even though there are no devices
     connected, in the offline menu, the Peripheral Settings screen's USB Screen
     shows USB equipment.
   - On the GP4200 Series, GP4300 Series, and LT4000 Series, you cannot edit
     Web Server settings offline.
   - With the SP5000 Series Power Box (SP-5B10) and WinGP, do not touch
     the top-right or top-left corners while starting up. 
     While normally this would take you to offline mode, there are certain
     circumstances when this will not work.
   - If you displayed SRAM usage right after initializing SRAM,
     the SRAM usage graph may be off by several pixels.
  <Memory Loader>
   - On the GP-4100 Series (Color Model), if you download the different CML file
     in a row without ending the memory loader, SRAM may be initialized
     after restarting the display unit.
  <Image Parts>
   - When the [Compress] check box is selected, transparency may not display
     properly.
  <Enhanced Recipe>
   - Search results may not display if you use system variables to search
     for a recipe, while deleting a recipe in an Enhanced Recipe List part.
     When this occurs, reset the display unit.
   - When there are a large number of recipes, importing recipes may take
     considerably longer than it did in Ver.4.6.10.
   - On the display unit, you can add enhanced recipe data to a project even if
     it exceeds 100% of its maximum transfer size. On the editor, if you use the 
     Receive Project command to get the project from the display unit, 
     you may not be able to transfer the project back to the display unit 
     due to a transfer size error.
   - If you set up a variable with less than 32 words as the label's destination
     address, the enhanced recipe may not work properly.
  <Change screen>
   - If you use a Word Add or Word Subtract switch on a device address
     that is used to define the screen number in a change screen switch, 
     the expected screen may not display if you change screens quickly.
     To reliably change screens, use a Selector switch.
  <External Buzzer Output>
   - When [Display Unit] - [Operation] - [Output to External Buzzer Terminal]
     is enabled on the GP3300H or GP4000H series, the GP3000H conversion adapter
     emits the external buzzer for the following operations from the maintenance
     menu.
     - Check Pattern
     - Check Touch Panel
     - Calibrate Touch Panel
     - Check COM1/COM2/LAN
     - Memory Info
     - Check Function Switch
  <Pro-face Remote HMI>
   - When the operation switch is enabled on the GP4000H series, only monitoring
     is possible from the client. The client cannot perform any operations.
   - On the GP-4621T or GP-4521T,  video module images of VM Unit and RGP Input Unit 
     do not display on the Remote HMI client side.
   - When connecting to OpenBox, occasionally screen distribution
     may be delayed.
   - When the Pro-face Remote HMI is connected to HMI via the EZ LAN Adapter,
     you may not be able to reconnect automatically when unplugging
     then plugging back in the EZ LAN Adapter.
     Please return to the server list and reconnect.
  <File Manager>
   - Occasionally the File Manager does not sort its operation
     log's output files in file creation order.
   - While all items are selected in the File Manager with the [All] button,
     and the FTP server connection is released, the [All] button becomes
     highlighted. If this occurs, close the File Manager and open again.
   - While the "Confirm Delete" message box displays as a result of touching
     the [DEL] button in the File Manager, if you attach or detach USB memory
     the File Manager does not display the files in USB storage.
     If this occurs, close the File Manager and open again.
   - When the File Manager is connected to the FTP server and
     a file is not selected, sometimes the file date, time, and size may display
     incorrectly. If this happens, select a file in the File Manager.
   - Selecting either [Cancel] or [No] in a File Manager connected to
     the FTP server sometimes causes the date, time, and size of the wrong file
     to display. If this happens, select another file in the File Manager.
   - When the File Manager is connected to the FTP server and a copy file
     operation fails, the incorrect file name may appear in
     the confirmation message box.
  <Screen capture>
   - In the destination, if you specify a FTP server with PASV disabled,
     file write may fail and a 0-byte sized file may be created
     in the destination folder.
  <Feature>
   - When using GP4000M or LT4000M Series, restarting the display unit will erase
     the Japanese FEP information.
  <Pro-face Connect>
   - When using SiteManager Embedded V6121 17033: The Transfer Tool, 
     GP-Viewer EX, Pro-Server EX, and Pro-face Remote HMI Client for Win's 
     automatic search feature may not detect display units on the network.
   - With SiteManager Embedded V6121 17033, you can use only ASCII text
     for the Proxy Password.
   - With SiteManager Embedded V6121 17033, in the offline screen's
     Site Manager Embedded settings, when the LAN cable is disconnected from
     the display unit, a maximum 180 seconds may elapse before the status
     display shows as disconnected.
     To change the time it takes before the status display is updated,
     change the GateManager's Heartbeat Interval and Keep-Alive Interval
     values. Additionally, set the Heartbeat Interval so that it is greater
     than the Keep-Alive Interval.
   - When connecting multiple SiteManager Extend and LinkManager to an Open Box
     set up with SiteManager, Pro-Server EX may not operate properly on some of
     the LinkManager.
   - Sending or receiving large projects via LinkManager fails sometimes.
   - If LinkManager is already installed and you install LinkManager again,
     sometimes the existing shortcut is not deleted and results in duplicate
     shortcuts.
   - If you forcibly transfer via Link Manager a project to a display unit
     set up as the agent of Site Manager Extend, the transfer operation
     sometimes fails.
  <Time zones>
   - Sometimes the "Automatically adjust daylight saving time" setting
     changes on the GP-5B40 and SP-5B41.
  <Others>
   - Turning on the display unit with the SD card inserted, it may take a few
     seconds longer to show the initial screen.

 2-3 Device/PLC
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - In Pro-Server EX's Device Monitor function 
     when a Multiple Bit Write operation is performed on an array type Tag 
     it may not write correctly. 
   - When single bit write operation is performed on a 32-bit Tag(DINT), 
     the 16th bit cannot be written. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - When a Copy / Paste operation which results in the maximum number of Tags
     being exceeded no error is displayed. 
   - When several Tag Data Files are created, the maximum number of Tags 
     may not be checked correctly. 
  <TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200)>
   - In Pro-Server EX's Device Monitor function the Multiple Bit Write 
     operation may not work in some cases.
  <Fuji Electric Co., Ltd. MICREX-SX Series SIO>
   - Do not use "Indirect" setting for the String type. If it is specified, 
     data may not be displayed normally.
   - When STRING variables are displayed in Device Monitor of Pro-Server EX, 
     only two characters are displayed.
  <GE Fanuc Automation Series 90-30/70 SNP>
   - Some spelling mistakes are found in English error messages.
  <GE Fanuc Automation Series 90-30/70 SNP-X>
   - If an error occurs during communication, set "1" or larger value 
     for Retry Count.
  <Mitsubishi Heavy Industries, Ltd MHI STEP3 Ethernet>
   - When a bit device is specified in Alarm Summary, alarms of 17th bit or 
     later are not displayed normally. If this phenomenon occurs, use the word 
     device.
  <Mitsubishi Electric Corporation FREQROL Inverter>
   - When the link parameter device is read, the communication cycle time 
     becomes an illegal value.
  <Mitsubishi Electric Corporation Q Series CPU Direct Connection>
   - In a screen where a Display Unit does not communicate with a PLC:
     When an access is made to the PLC using the pass-through function 
     after the PLC is restarted, the password lock occurs to the PLC.
     Make connections using the pass-through function after the screen is 
     shifted to the one where the Display Unit communicates with the PLC.
   - Do not write the data including the bit address with the extended recipe 
     function. If such writing is made, a communication error may occur.
  <ODVA DeviceNet Slave>
   - Do not input 32 or more characters for the device address in Address Input 
     of Device Monitor.
  <Rockwell Automation EtherNet/IP>
   - Tag information allocated to I/O units may not be imported normally.
     If this phenomenon occurs, edit the data with the Editor manually.
  <Siemens AG>
  <PROFIBUS International>
   - When bit read/write for two or more points is performed to 
     a bit-accessible word device or word type tag, an address other than 
     the specified address may be read/written.
  <SIMATIC S5 3964(R)>
  <SIMATIC S7 3964(R)/RK512>
   - When Gateway Mode on the GP-4G01, occasionally a response error occurs 
     on the HMI.
  <KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct>
   - In Gateway Mode on the GP-4G01, Pass-Through function on HMI
     sometimes fail.
  <Pass-through Function>
   - The pass-through function cannot be used when WinGP and IIS FTP servers are 
     used at the same time.

 2-4 WinGP
  <Function>
   - The buzzer of WinGP does not sound in PS-4700 (Z510).
  <File Manager>
   - When the File Manager displays a folder path and data in that folder is
     updated, the folder path reverts to the default path.
  <Pro-face Remote HMI>
   - The system load status or wireless communication status may prevent the
     application from disconnecting within the time specified by the property:
     Disconnect after communication is down for.
  <Transfer Tool>
   - When using the USB transfer cable (CA3-USBCB-01) to get display unit 
     information, the screen list may not be available. You can add a base screen 
     to make the screen list visible.
  <Offline>
   - When using Window 7 or later as the operating system,
     you cannot remove hardware while offline.
     When detaching a storage device from this product, 
     use the Windows Safely Remove Hardware tool.

 2-5 Pro-face Remote HMI Server
   - In Windows 8 / 8.1 / 10, application distribution fails to correctly
     display distributed screens of Excel 2013 on the client.
     To distribute Excel 2013 screens, use desktop distribution.

(3) When Serial No. and License Key Code are not input
   - Project data cannot be transferred to the operation panels
     (except for GP4100 series, IPCs and PC-ATs (Used WinGP)).
   - Transfer using the Transfer Tool is not available for WinGP. However, using
     ProjectCopy, you can copy screen data and get it to work.
     To use ProjectCopy, click [Start]-[All Programs]-[Pro-face]-[WinGP]-
     [ProjectCopy] on the Windows desktop screen.
     However, note that ProjectCopy cannot be used in the following cases:
     - When system data has not been transferred
     - When system data has been changed
       WinGP automatically stops after three hours of continuous operation.
      * It is possible to input the serial No. and the license key code after
        installation of the software. Start the product and go to [Help]-[Enter
        Key Code].

(4) Installation and Uninstallation
 4-1 Installation
   - Be sure to quit all application programs and close (disable) all resident
     programs such as virus detection software before installing the software.
   - Install this software using a user account with Administrator privileges.
   - Refer to our support site "Otasuke Pro!" (http://www.pro-face.com/otasuke/)
     for the operating environment.
   - By inserting a disk into the DVD drive, Setup window will appear.
     If the Setup window does not appear, click the desktop's [Start] button
     and then click [Run]. In the text input field, enter [D:\ProEX_Setup.exe]
     and click [OK].
     (As for the "D:\" part, enter your DVD drive name.)
       * Some of the tools require a license.
       In cases below, USB transfer cables may not be recognized correctly:
       - When you installed the software with a USB transfer cable connected
       - When you started using the software without restarting your computer
   - <How to install ".NET Framework2.0" when not connected to Internet>
     1)Insert the Windows installation media.
       If you do not have the Windows installation media, contact the PC
       manufacturer.
     2)Select "Open command prompt as administrator" on the Explorer.
     3)Execute the following command at the Command Prompt.
       Dism /online /enable-feature /featurename:NetFx3 /All /Source:x:\sources
       \sxs /LimitAccess 
       *) For x:, specify the drive letter of Windows installation media or the
          DVD drive.

 4-2 Uninstallation
   To uninstall the software, click on [Start], then select [All Programs]-
   [Pro-face]-[***], and execute [Uninstall]. ("***" represents the product
   name and version.) Project files and files in your package files will not be
   removed by this operation. Delete other tools from [Start]-[Control Panel]-
   [Add or Remove Programs].

(5) User Registration
   Please register your software to help us offer enhanced customer support.
   Since you can confirm the registered information at anytime once you
   register, you do not have to worry even if you lose it. To register, insert
   a DVD into the DVD drive, select the User Registration menu in the Set Up
   Menu screen and complete the online Software User Registration. You can also
   register after installation by starting the product and registering from
   [Help]-[Online User Registration].

(6) Manuals
   To view PDF manuals, the Adobe Reader software must be installed on your
   computer. Start the product and select [Manual] from the [Help(H)] menu.
   To view only the manuals, select [Start]-[All Programs]-[Pro-face]-[***]
   -[Manual].("***" represents the product name and version.)
   Some manuals need to be downloaded from our support site "Otasuke Pro!".

(7) Fixed Defects
 = V4.07.300 ===================================================================
 7-1 Editor
  <Editor>
   - In the switch's Set Bit group feature, the label "Number" has changed to
     "Group".
  <Project Converter>
   - When converting GP-Pro PBIII project data, regardless of whether or not
     there were screen drawings, the logged showed the message
     "1/2 kanji fonts are not converted".
   - If there were invalid characters in the Convert From or Convert To fields
     in the Project Converter, and you clicked [Browse],
     sometimes the Select File dialog box did not display.

 7-2 Display Unit
  <Enhanced recipe>
   - In the Transmission settings, if you set a variable with less than 32 words
     as the destination address, any transferred recipe data could become zero.
  <Ethernet>
   - On the GP4000 series (excluding GP4000M series, GP410* series)
     and LT4000 series, the Ethernet communication is slow.
  <EZ LAN Adapter>
   - When EZ LAN Adapter was attached/detached,
     the display unit rebooted rarely.
   -  Even if Default Gateway was specified, it was not set.
  <System Variables>
   - If you touched the screen while the operation lock was enabled,
     and you continued to touch the screen when the operation lock was released, 
     on releasing the touch the value of LS9234 bit 00 was 0 (lock is on) and
     would not return to 1 (lock is off).
  <EZ Tower Light>
   - If you connect the EZ Tower Light to a computer
     with GP-Viewer EX installed, sometimes exiting GP-Viewer EX caused
     the EZ Tower Light to flash red.
  <Offline>
   - In the Offline screen's Maintenance menu, even though there was
     nothing wrong with the display unit, sometimes the Check Display Pattern
     did not draw the pattern to the right and bottom margins of the screen.
  <Brightness>
   - When the brightness setting on the SP-5000 Series Power Box (SP-5B10)
     was [Auto], turning off the display unit did not retain
     the brightness setting.
  <Brightness adjustment bar>
   - When adjusting the brightness setting with the brightness adjustment bar,
     sometimes the incorrect sounds were emitted on touch.
  <Memory Loader>
   - Sometimes the display of the numerical value for free space
     in storage shifted downward.
   - The Memory Loader displayed a typo for the following models: 
     SP5B10, GP-4114T, GP-4115T, and GP-4116T.
  <Pro-face Remote HMI>
   - Screen of client did not display correctly,
     when the display of GP-4G01 unit's [Orientation] was [Landscape].

 7-3 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - Reading display unit information from the Transfer Tool sometimes failed. 
  <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - Importing variable comments sometimes failed.
  <Rockwell Automation EtherNet/IP>
   - Sometimes the wrong value was read from BOOL type variables.

 = V4.07.200 ===================================================================
 7-1 Editor
  <Editor>
   - When changing the model for a LT series project, 
     if the I/O driver's L system variable was used in a part, 
     sometimes the system variable's argument did not get updated.
   - Even though the operating language was Japanese, sometimes part of 
     the sampling settings and global trigger settings displayed in English.
  <Project Comparison Tool>
   - If you ran the Project Converter on a project set up with a Text Table, 
     sometimes the resulting project could not be compared.
   - If you compare projects where symbol variables were added in
     a different order, sometimes the comparison will show differences
     in the symbol variable settings.
   - Comparing function switches sometimes resulted in the message, 
     "Comparison item not found".
  <Project Converter>
   - When converting a GP-ProPBIII project of a portrait view model, 
     sometimes the placement of image objects would get re-arranged.

 7-2 Display Unit
  <Alarm>
   - If the GP is shutdown while an alarm is triggered, on the rare occasion
     the alarm time stamp showed "00/00/00".
   - If the GP is shutdown while an alarm is triggered, 
     and a new alarm is triggered after restarting, on the rare occasion
     the GP stopped working.
  <Security>
   - On the GP3000 series (excluding the GP-3200 series),
     using security settings sometimes slowed the scanning of parts.
  <Enhanced Recipes>
   - If you were unable to save Enhanced recipe elements, it occasionally
     resulted in not being able to run the Enhanced recipe process.
   - If you used Enhanced recipes on a project whose size approached 100%,
     by adding enhanced recipe data on the unit you could save beyond
     the maximum project size. 
     If you transfer it back to the editor and open the project,
     you may not be able to transfer it again due to a transfer size error.
  <Text Table>
   - On the GP4000M series, sometimes the loading of the text
     table file (USB memory) on start up did not work.
  <Memory Loader>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP-4100 series), sometimes you could not use
     a SD card on the Memory Loader tool.
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10)
     or SP5000WA series, sometimes the initial screen displayed without
     recognizing USB storage even though the initial screen was set up
     to display only after recognizing USB storage.
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update stopped.
  <GP-Viewer EX>
   - Connecting GP-Viewer EX to WinGP and operating an Historical Trend Graph
     caused the display of an error dialog box.
  <GP-4G01 Gateway Mode>
   - When communicating at high speed (115.2 kbps) with a PLC
     with good communication performance, occasionally a communication error
     occurred on the HOST side.

 7-3 Device/PLC
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - On the LT4000 series, GP-4402 WW, GP-4502WW, GP-4114T, GP-4115T, GP-4116T, 
     and SP5B10, sometimes after transferring an error displayed and
     the unit did not start up.
  <Siemens SIMATIC S5 3964(R)>
   - Note the following fixed defects when Gateway Mode on the GP-4G01: 
     - If the GP-4G01 has never run communication at all and the HMI starts
       communication, a response error occurred once on the HMI.
       After a re-transmission, the error is restored.
     - If you enter the GP-4G01 offline screen then change back to the online
       screen, a response error occurred on the HMI.

 = V4.07.101 ===================================================================
 7-1 Display Unit
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update stopped.

 = V4.07.100 ===================================================================
 7-1 Editor
  <Screen Editor>
   - If you use Call Screen to load a screen with text that used the Image font
     type with Anti-alias enabled, sometimes the text defined in the screen
     editor did not appear.
  <Simulation>
   - Improved the issue that logic tab in simulation not displaying.
  <Project Comparison Tool>
  <Version Reverter>
   - Entering invalid characters in the Project Comparison Tool's Source/Target
     for comparison fields, or the Version Reverter's Convert From File
     or Convert To File fields, sometimes caused the tool to exit unexpectedly.

 7-2 Display Unit
  <Online Monitor>
   - If you set the Retry Count to 9 or more in the Monitor settings,
     sometimes the connection failed and an error occurred.
  <Screen Transfer>
   - Failing to transfer a project with device/PLC registers mapped
     to the System Data Area sometimes caused an invalid value to get written
     to the system area start address.
  <EZ Fingerprint Recognition Unit>
   - Sometimes GP4000 Series units could not register fingerprints
     on EZ Fingerprint Recognition Units sold from 2016 onward.
  <WinGP>
   - Added preventative measures against spoofed arbitrary code that may be executed.
  <GP4000 Series>
   - On the GP-4201TW, the USB port (Type A) could not be recognized.
  <Communication>
   - The models as follows would get hung with COM port communicating. 
     - LT4000 series
     - GC4000 series
     - GP4*02WW series
     - GP411*T series
     - GP4*01TM series
 7-3 Device/PLC
  <Communication Driver>
   - When converting the project of GP-Pro PBIII which set the following 
     communication driver, it could not be transmitted to the HMI.
     - Fanuc LTD. Power Mate Series
     - Fuji Electric Co.,Ltd. MICREX-SX Series SIO
     - Hitachi, Ltd.S10 Series SIO
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
     - KEYENCE Corporation S10 Series SIO
     - Mitsubishi Electric Corporation A Series CPU Direct
     - Mitsubishi Electric Corporation A Series Computer Link
     - Mitsubishi Electric Corporation FX Series Computer LinkA
     - Mitsubishi Electric Corporation FX Series CPU Direct
     - Mitsubishi Electric CorporationQ Series CPU Direct
     - Mitsubishi Electric Corporation Q/QnA Serial Communication
     - Mitsubishi Electric Corporation QnA Series CPU Direct
     - OMRON Corporation C/CV Series HOST Link
     - OMRON Corporation CS/CJ Series HOST Link
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
     - Siemens AG SIMATIC S5 3964(R)
     - Siemens AG SIMATIC S7 3964(R)/RK512
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200)
     - YASKAWA Electric Corporation MEMOBUS SIO
     - YOKOGAWA Electric Corporation Personal Computer Link SIO

 = V4.07.000 ===================================================================
 7-1 Installation
  <Pro-face Remote HMI Server>
   - If you uninstall Remote HMI Server then re-install without restarting
     your computer, installation could fail.
   - If you ran a software update while Pro-face Remote HMI Server is running, 
     installation could fail.

 7-2 Editor
   <Transfer Tool>
   - When the display unit was set up with a Send/Receive project password and
     on connection you entered the wrong password, when the password screen
     opened again an error message appeared.
   - When checking the Memory Loader backup data or creating a new project, 
     the file selection screen's file pulldown list contracted right away.

 7-3 Display Unit
  <WinGP>
   - WinGP failed to start on computers with the Multilingual User Interface
     (MUI) pack installed.
   - In Forced Transfer mode, on exiting WinGP a dialog box appeared with
     corrupted characters in the title bar.
  <System Variables>
   - If you set an invalid value other than a BCD value for the clock data, 
     the clock did not show the time correctly.
  <Communication Scan>
   - When the device/PLC communication scan was OFF, 
     an error appeared when accessing the PLC.
  <GP4100 Series>
   - When the transmission speed was 115,200 bps, the USB-Serial (RS-232C) 
     conversion cable could not be recognized.
  <Sampling>
   - Sometimes sampled data could not be collected anymore if you detached 
     external storage from the unit while saving sampled data to CSV format.
  <FTP>
   - While an FTP server was not added in the FTP server settings and 
     you captured a screen and tried saving to an FTP server, 
     you could not enter offline mode or transfer mode anymore.
  <Web Server>
   - If you set an invalid value for the Device View's Update Frequency parameter
     from an URL, the device value did not update or an error occurred.
  <Enhanced Recipes>
   - After setting the label's destination address in the screen editor,
     if you change the destination address by using either Change
     Device/PLC or Convert Address, sometimes the recipe label did not display.
  <Pro-Server EX>
   - Entering offline mode while running one of the following processes
     sometimes caused the corresponding operation to not run:
     - [Save] in the Save GP Screen tool
     - [GP JPEG Upload] action
     - Excel form action's [Upload GP screen data]
  <Others>
   - When an online error and system error occur at the same time, 
     sometime touch did not work and the error window's reset button
     would not operate.
   - There was an issue where system errors did not display on
     the GP-4201TM (Modular Type) and GP-4301TM (Modular Type).

 7-4 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - The use of Ethernet 2 port functionality by SP5000 series (SP-5B10)
     could result in communication errors.
  <Siemens AG TIA Portal Ethernet
   - Tag import functionality failed to import data type "Struct".
   - Tag import functionality failed to import tag data from STEP7
     Safety projects.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Cannot launch HMI if project file imported several Tag data in some case.

 = V4.06.300 ===================================================================
 7-1 Editor
  <Simulation>
   - In simulation, when monitoring the logic, the display position of I/O values
     may shift sometimes.
  <Project Comparison Tool>
   - When comparing projects with the [Show only differences] option, 
     double-clicking the difference sometimes displayed the wrong line. 
  <Editor>
   - Addressed the feature in our software that caused some antivirus software 
     to erroneously identify as a virus.

 7-2 Display Unit
  <USB Devices>
   - When using GP4000H (hand-held) Series and you connect to multiple USB hubs
     and USB devices, the display unit sometimes reset on disconnecting an USB device.
  <Enhanced Recipe>
   - Turning ON #H_RecipeControlMapAddress occasionally generated a system error.
  <Alarm>
   - The wrong warning message appeared when drawing an alarm part with banner 
     enabled and a part with animation enabled on the same screen.
  <Operation Log>
   - When using SP5000 or GP4000 Series (except GP-4100 Series), using a read-only
     SD card sometimes slowed the performance of operation logs.
  <Memory Loader>
   - When using SP5000 or GP4000 Series with USB 2.0 USB memory, the Memory Loader
     sometimes failed. 
   - Memory Loader could not start under the following conditions.
     - Display unit's system version was 4.50.000 or later
     - Startup data for the Memory Loader was created on version before 4.50.000.
  <Logic Monitor>
   - When using GP3000 and LT3000 Series units, the wrong value was set to
     #L_FaultLogicScreen and #L_FaultStep.
  <EZ Tower Light>
   - When using SP5000 Series Open Box (SP-5B40) and while WinGP was restarting 
     after a transfer, the EZ Tower Light sometimes buzzed and all the layers
     turned red and flashed.
  <Text Table>
   - When using the Load Text Table feature with codepage 850, sometimes the text
     did not display properly.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - Grouped Data blocks and PLC tags cannot be imported.
  <ODVA EtherNet/IP Explicit Messaging>
   - Transfer error is happened if user configured assembly instance over 256.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Individual Device Settings in Beckoff TwinCAT driver sometimes shows wrong settings.

 = V4.06.200 ===================================================================
 7-1 Editor
  <Simulation>
   - In the Text Table Settings, when the value in the Change Language control
     address is out of range (17 or greater), editing the label in an extended
     recipe could cause simulation to exit unexpectedly.
   - Using unregistered variables in the function block of a logic program
     occasionally caused simulation to exit unexpectedly.
   - Occasionally simulation stopped working when you assigned a fractional
     value to a Float or Real data type variable.

 7-2 Display Unit
  <Project Copy>
   - Occasionally this tool was unable to copy projects associated with
     PS-5000 or PS/PE-4000 models to WinGP.
  <COM Port>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the COM port.
  <USB A Port>
   - An USB device with three or more configuration descriptors becomes unusable
     when connected to the GP4000 Series (except GP-4100 Series, GP-4201-TM,
     and GP-4301TM).
  <USB/SIO Cable>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the USB/SIO(RS232C) and USB/SIO(RS422/485) cables.
  <Bar code input>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not accept input
     from a USB bar code reader properly.
  <Touch Panel>
   - When using the SP5000 Series Power Box (SP-5B10) with the Advanced Display
     (SP-5x00WA), occasionally touch panel operations did not work properly.
  <Filing>
   - On the GP-4100 Series (color model), after using a Special Switch
     to transfer filing data from the device/PLC to SRAM and the display unit
     was turned OFF, occasionally the transferred data was not saved.
  <Sampling>
   - When you setup the System Data Area as a PLC device, and you save sampling
     data in CSV format, occasionally the timestamp for sampling data is shown
     as 00:00:00.
  <Extended Scripts>
   - In rare cases, using drawing functions in extended scripts caused
     the display unit to stop working.
  <Logic program>
   - On the LT4000 Series, after the PLSQ instruction you could not output
     acceleration/deceleration pulses from the PLSY instruction only.
     <Logic program>
   - When you start Monitor Step on the SP5000 Series Power Box (SP-5B10),
     the value in a portion of the bit variables used in function blocks
     could not be refreshed.
  <WinGP>
   - Even when communication is not yet established with a PLC once, now you can
     still back up internal devices.
  <Script>
   - Importing a CSV file with an unsupported line feed code (LF) could cause
     the display unit to stop operating normally.
   - You can now use "LF" as the line feed code in CSV files read in with
     the SD_read_CSV function.
  <Offline>
   - When using the bar code settings or script settings in WinGP,
     even when COM was in use it displayed as [Do not use]. 
     Additionally, on the SP5000 Series Open Box (SP-5B40), even if 
     COM was set up not to be used, COM appeared as if it was set up.
   - In the SP5000 Series Open Box (SP-5B40) Bar Code Settings,
     even though you displayed the Bar Code 2 settings, the 5V Power Supply
     always showed the setting defined in Bar Code 1.
  <Alarms>
   - On the GP4000 series (except for GP-41** series, GP-4201TM,
     and GP-4301TM), sometimes system errors would display
     when an extended alarm message occurred.
  <Others>
   - At run time on the SP500 Series Power Box (SP-5B10), occasionally
     the Display LED flashed between red and green and the display unit
     would not run anymore.
   - After replacing the system card on the SP5000 Series, you occasionally
     were unable to start up the unit.
   - In rare cases, the LT4000 Series stopped working during
     serial communication.

 7-3 Device/PLC
  <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When using multiple CPUs, occasionally invalid values were read.
   - Occasionally normal communication was not possible when using
     Serial Multi Link.
  <YASKAWA Electric Corporation MP Ethernet/MECHATROLINK>
   - When selecting "Stepping(Orientalmotor) AZ Series 
     Multi-Axis Driver(M-III)", the parameter reference function in address 
     input dialog did not work.

 = V4.06.101 ===================================================================
 7-1 Installation
   - The following behavior has been revised by removing corresponding file;
     Some virus check tools show a warning message of virus detection.

 = V4.06.100 ===================================================================
 7-1 Editor
  <Version Reverter>
   - If you converted a V4.0 project to V3.6, you could not open that project
     in the screen editor.
  <Logic>
   - After inserting a label, using the Undo command sometimes caused GP-Pro EX
     to exit unexpectedly.
  <Transfer CSV Data>
   - When using the Japanese operating language, in the Recipe Settings
     (Transfer CSV Data) - CSV Data Transfer Condition, the [Number of Digits]
     field displayed as [Decimal Places].
  <Comparison Tool>
   - When the model was SP5B40+SP5660TP, comparison was not possible with
     projects using different display modules.
  <Transfer Tool>
   - When using automatic transfer to send a project with backed up historical
     alarm data, sometimes SRAM was not cleared and historical data became
     invalid.
   - When sending projects to multiple display units in automatic transfer mode,
     sometimes the transfer tool exited unexpectedly.

 7-2 Display Unit
  <I/O Driver>
   - When the display unit turned OFF, the I/O driver instructions PLSY/PLSQ
     did not output anymore.
   - Analog output was not possible when the analog output's value for the lower
     limit was greater than 0.
  <WinGP>
   - As soon as a display unit started up, touching a Special Switch to enter
     the offline screen sometimes caused the PC-Runtime to display a halt error
     message.
  <Printing>
   - When using certain printers, printer output was duplicated.
  <Offline>
   - Transferring projects from past versions of GP-Pro EX to GP4000 series
     (excluding GP4100 series, GP-4201TM, and GP-4301TM) sometimes caused
     the setup items in the offline screen to not display properly.
  <System Data Area>
   - Depending on the address you used as the system data area's start address,
     the system data area did not operate properly.
  <Transfer CSV Data>
   - Sometimes erroneous values were output when using Tranfer CSV Data to
     create your CSV.
  <Logic>
   - In the logic program, setting a value greater than 65536 to a 16-bit
     address sometimes caused a communication error.
  <Pro-face Remote HMI>
   - Even though an Off delay switch was pressed on the client, screen change
     operation was possible on the display unit.
   - Even when a client monopolized touch operations, function switch operations
     on the Hand-held GP was possible.
   - While displaying an analysis list, changing the client to asynchronous
     connection caused a system error.
   - When running asynchronous screen monitoring while WLAN communication was
     unstable, and you used the [Previous Screen] switch, sometimes it
     displayed the wrong screen.
   - Pressing function switches on the hand-held GP did not monopolize touch
     operations and touch operations were possible from the client.
  <Enhanced Recipes>
   - On a screen without a Recipe List part, after receiving enhanced recipe
     data, copying the enhanced recipes actually copied the recipes prior to
     receiving the enhanced recipe data.
  <Screen Transfer>
   - When using the SP5000 Series Power Box (SP-5B10) in forced transfer mode,
     transferring the project file sometimes failed.
  <Others>
   - On the rare occasion, LT4000 series units did not start up.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - When using the Siemens AG TIA Portal Ethernet driver, failed to transfer
     the project to the display unit after re-importing the TIA Portal project
     file.
  <TwinCAT ADS/AMS driver>
   - When using the BeckhOFF driver, sometimes String-Array text could not
     display in the GP's data display part.
  <Rockwell Automation EtherNet/IP>
   - Occasionally, the driver's scroll bar did not work properly.
  <IEC Standard IEC 60870-5-101>
   - Occasionally, the IEC driver's element status addresses did not work
     properly with alarm history.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Changing the tag name occasionally caused operations to not work properly.
  <LS Industrial Systems Co., Ltd. GLOFA Series Cnet>
   - When using older link units, occasionally communication errors occurred.

 = V4.05.100 ===================================================================
 7-1 Editor
  <Editor>
   - On the PS-5000 series and PS/PE-4000 series, after selecting COM2
     in the device/PLC settings, sometimes the RS422/485 option
     could not be selected.
  <Sampling>
   - In the Sampling settings, editing the address in the address settings
     sometimes caused the application to exit unexpectedly.
   - In the Print Settings, sometimes the number of characters
     in the Print Preview did not match the actual printout.
  <Print>
   - Printing the I/O settings omitted the I/O name.
  <Data Display>
   - If you select the Sign +/- check box in a Numeric Display,
     and from the Display settings select Image Font,
     sometimes the preview did not display numeric values.
  <Text Table>
   - Editing the contents of the Text Table sometimes changed the position of
     referenced text parts.
  <Function Blocks>
   - After creating a function block with no registered variables,
     displaying [Project Information] or the function block's
     [Change Attributes] dialog box occasionally caused the application
     to end unexpectedly.
  <Project Comparison Tool>
   - Comparing the same project sometimes produced differences.
  <Remote Viewer Settings>
   - Unable to set up FTP or Web Server functions on GP3300 Series,
     models earlier than Rev*-4.
  <Others>
   - After deleting a base screen, from the [Edit] menu selecting [Undo]
     sometimes changed the [Shape] of parts to [No shape].
   - When deleting one of the vertex points on a Polyline, Polygon,
     or Picture Display, sometimes the display position shifted to something
     other than the deleted point.

 7-2 Display Unit
  <WinGP>
   - From the system menu, reset sometimes caused WinGP to end unexpectedly.
   - From the WinGP offline screen, sometimes the task manager would not start.
   - When using a project set up with sound functions,
     sometimes you could not enter offline mode.
  <Offline>
   - On a display unit that does not support MPI,
     from the offline maintenance menu's [COM1/COM2/LAN Check]
     property selecting [COM2/RS422] would sometimes display the dialog box
     for MPI models.
  <Sampling>
   - Saving sampling data to CSV format sometimes caused
     a date of 00/00/00 for sampling records.
  <Transfer Tool>
   - When CF card is selected as the destination in the [Project Information],
     during screen transfer the Transfer Tool sometimes ended unexpectedly.
  <Online Monitor>
   - When monitoring logic online and the connection with
     the display unit fails, sometimes the display unit would cease to run.
  <Data Display>
   - When the Address Type is [Address] or [Device Type Address],
     the popup keypad's display speed has been improved.
  <Memory loader>
   - When using USB memory with the write protection feature enabled
     and you transfer screen data from the memory loader, the IP address
     on the display unit would sometimes change.
  <Error Message>
   - On the GP-4100 series (Color Model), when the backup battery
     is running low on power, the message "RAAA055:Clock data has been
     initialized" would display.
  <Logic>
   - When using a Bit Type system variable as a Function Block operand,
     sometimes the operation would be incorrect.
  <Script>
   - When using the Write File instruction, setup with offset and
     overwrite modes, the write operation took some time to complete.
  <System Variables>
   - On the GP-4100 series (Color Model), even though the project
     has not been transferred, sometimes the #H_TransferChange system variable
     would not turn OFF.
  <Momentary Switch>
   - On WinGP, while touching a momentary switch, touching two or more points
     outside the momentary switch sometimes caused the momentary switch
     to turn OFF.
  <Others>
   - On the GP-4100 series (Color Model), if the USB connection is interrupted
     while transferring the project, or the display unit is powered OFF,
     sometimes touch did not work.

 7-3 Device/PLC
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP5000 series, while communicating with the PLC,
     frequently accessing the SD card on the display unit sometimes caused
     a communication error.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - Sometimes failed to import variables.
   - Sometimes failed to import structured variables.
   - Reading text data sometimes caused WinGP or Open Box to stop running.
  <Panasonic IndustrialDevices SUNX MEWTOCOL7-COM Ethernet>
   - When communicating with an older CPU, 
     sometimes communication errors occurred.

 7-4 Pro-face Remote HMI Server
  <Screen Distribution>
   - On application distribution, if the client is disconnected
     then reconnected, sometimes the client screen would turn white
     and the application screen could not be displayed.

 = V4.05.000 ===================================================================
 7-1 Editor
  <Editor>
   - When using the Premium Display Module with 
     the SP5000 Series Open Box (SP-5B40), sometimes you could not open a
     project received using the Receive Project command.
   - Previously unable to set up a modem on the LT4000 series.
   - There was an error in part of the Cyrillic stroke font.
  <D-Script>
   - Added preventative measures against stack overflows and unauthorized memory
     access caused by spoofing.
  <Transfer Tool>
   - When using AGP3750T or AGP3560T, sometimes the run time was also
     transferred despite the setting defined in the Automatic Transfer property.
   - Added preventative measures against spoofing used to reference data.
  <Project Comparison Tool>
   - Sometimes the tool was unable to complete comparison of Alarm attributes.
   - The process was interrupted when comparing projects with the following
     parts or screens.
     - Remote PC Access Window
     - Alarm
     - Window
     - Graph
     - Sampling Data Display
     - Selector List
     - Text Alarm
     - Historical Trend Graph
     - Show CSV
     - Data Transmission
     - Filing
     - File Manager
     - Function Block screen

 7-2 Display Unit
  <Alarm>
   - Improved polling performance of extended alarms on GP4000 series,
     SP5000 series, and WinGP.
  <Script>
   - On the GP-4100 Series, GP-4201TM and GP-4301TM, communicating over
     RS-485(2-wire), clearing the send or receive buffer with the EXT_SIO_CTRL
     control variable sometimes disabled GP-4000 so it could not receive the next
     data.
  <Startup>
    - On the SP5000 series and WinGP, when Device Monitor was enabled, sometimes
      the display unit had difficulty starting up.
  <Sampling>
   - The Sampling Display part's Refine Search feature was unable to find dates
     in the 2000 to 2009 year range.
  <FTP>
   - On the SP5000 Series Power Box (SP-5B10), previously unable to make a PASV
     Mode connection from a FTP client
  <Pro-Server EX>
  <WinGP API communication>
   - While the display unit is saving SRAM backup data, sometimes an error
     occurred if you saved Pro-Server EX SRAM backup data, if you ran an action
     that accesses SRAM, or if you ran an API that reads the SRAM backup data.

 7-3 Device/PLC
  <GE Intelligent Platforms Series 90-30/70 SNP-X>
   - In the Alarm Summary, setting up a bit device (bit 17 or later) did not
     display correctly.
  <Siemens AG SIMATIC S7 MPI Direct>
   - When used with the SP5000 series, sometimes a communication error occurred.
  <LS Industrial Systems Co., Ltd. XGT/XGB Series FEnet>
   - On reading a bit device, sometimes the wrong value was read.

 = V4.04.100 ===================================================================
 7-1 Editor
  (Editor)
  <Project Information>
   - Project Information did not display input Integer Variables correctly.
   - When the operand of a function block instruction is empty, displaying
     the Project Information caused GP-Pro EX to exit unexpectedly.
  <Transfer tool>
   - Speed of transferring projects over LAN is improved on WinGP, SP5000 series
     (Power Box and Open Box), and GP4000 series (except GP-4100 series,
     GP-4201TM, and GP-4301TM).
  <Project Comparison Tool>
   - The Comparison Tool stopped working when comparing a project set up
     with comments in the Movie Player.

 7-2 Display Unit
  (Runtime)
  <Barcode Reader>
   - When scanning repeatedly over a short period of time, the barcode reader
     dropped bits of data.
  <WinGP>
   - When SRAM usage exceeded 512 KB, internal device backup did not run.
  <Extended Script>
   - When using drawing functions in extended scripts, on very rare occasions
     the Display locked up.
  <FTP>
   - FTP clients could not connect to the SP5B40 unit's LAN2 port.
  <USB A Port Communication>
   - When a GP4000 series unit (except for GP-4100 series, GP-4201TM, and
     GP-4301TM) communicated at high speeds with a USB device connected
     to the USB A port, sometimes access to the USB device became unavailable.

  7-3 Device/PLC
  <Siemens AG SIMATIC S7 Ethernet>
  <Siemens AG SIMATIC S7 MPI Direct>
   - Starting Simulation slowed when using a large number of tags.
  <Schneider Electric SA MODBUS SLAVE>
   - On a newly created project where Ethernet is selected, running bit
     operations on retentive registers cleared bits in unrelated registers.

  7-4   Pro-face Remote HMI Server
  <Screen Distribution>
   - Using desktop delivery, you can now input from the software keyboard
     on the server.

 = V4.04.000 ===================================================================
 7-1 Editor
  (Editor)
  <Transfer tool>
   - Transfer Tool did not display the I/O driver name in the Transfer File
     Information.
   - The Transfer Tool's [CF/SD card connection], sometimes folder copy would
     end abruptly.
  <font>
   - There was an error in part of the Cyrillic stroke font.

 7-2 Display Unit
  (Runtime)
  <Data Display>
  <WinGP>
   - Enabling Windows touch on Windows 7 or later slowed the reaction time of
     momentary switches.
  <Enhanced Recipe>
   - In Enhanced Recipe mapped addresses, sometimes the corresponding element
     values were invalid.
   - The Enhanced Recipe's #H_RecipeResultTransfer variable did not correctly
     reflect an error.
   - System error sometimes occurred when importing a CSV file as an Enhanced
     Recipe.
  <Pro-face Remote HMI>
   - When a client in asynchronous mode and a client in synchronous mode are
     connected at the same time, and you set an invalid table number 
     in the Text Table's [Switching Control Address], changing the screen
     on the asynchronous client caused the screen on the server to change.
   - When monopolize touch was set to 0 seconds, and the client was
     disconnected while touching the screen, touch did not turn OFF.
   - Frequent screen changes from a client in asynchronous mode sometimes
     caused the screen on the server to change.
   - Even though the time elapsed for monopolize touch, sometimes
     this feature would not release touch.
   - While a client is running monopolize touch and a switch is continually
     touched on the server, even though the switch is still touched and should
     not activate anything, the switch actions run as soon as monopolize touch
     is released by the client.
   - Connecting Remote HMI for extended periods sometimes caused WinGP to crash.
   - When multiple clients connected in synchronous mode, unable to monopolize
     touch between clients.
  <Animation>
   - Color animation for image file sometimes did not work.
  <Script>
   - On the GP-4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM),
     communicating over RS-422/485 2-wire, clearing the send or receive buffer
     with the EXT_SIO_CTRL control variable sometimes disabled GP-4000 
     so it could not receive the next data.
  <Others>
   - On SP5B10, mapping the top address of the LS area to a device/PLC address
     with a bit length of 32 bits sometimes caused the internal device backup
     data to be 0xFFFF.
   - On the GP-4201TM or GP-4301TM, sometimes the screen did not recover
     from standby mode.
   - SP5B10, on the rare occasion , displayed error [RGAA001: Watchdog error].

 7-3 Device/PLC
  <Azbil Corporation Controller (CPL)>
   - Accessing Network Addresses (00000001-0000FFFFh) in DMC50 sometimes
     caused a communication error.
  <ODVA EtherNet/IP Explicit Messaging>
   - When using implicit messaging and the TCP/IP connection was terminated
     from an external device, sometimes communication could not be restored.
  <CC-Link Partner Association CC-Link Intelligent Device>
   - When using "Cyclic Transmission"and "Transient Transmission" on the screen
     at the same time, only when "Cyclic Transmission" completed could the GP
     display data values.

 = V4.03.400 ===================================================================
 7-1 Editor
  (Editor)
  <Alarm>
   - In the Editor, there was the case that a part of the Address settings get
     initialized when copying and pasting (Assign Addresses) the Read Data From
     Each Alarm settings in Block tab of Alarm settings.
  <Trigger Action>
   - There was the case that an error below displayed in error check
     when opening the project file which set the screen changing
     by using trigger action.
     [1501: Base screen Illegal address. Define a correct address.]
  <Project Converter>
   - When converting the GP-PRO/PBIII project file which includes
     the tab character in variables, the project was not able to open
     in editor.
  <Error Check>
   - There was the case that project file using SP5B40 showed a warning of
     SRAM capacity displayed during Error Check when usage capacity of SRAM
     exceeded 320 KB.
  <Startup>
   - There was the case GP-Pro EX will not run in the environment that not
     have time zone information in windows registry.
  <Version Reverter>
   - There was the case that the project used GP4301TM was not changed
     correctly from V. 4.0 to V. 3.6 or earlier by Version Reverter.
  <Project Comparison Tool>
   - When comparing the project which changed the coordinates of text
     object, a message displayed telling "Comparison item not found".

 7-2 Display Unit
  (Runtime)
  <Data Display>
   - When pop-up keypad was displayed to right edge of the SP5B10 screen, there
     was the case that it was not displayed normally.
  <Online monitor>
   - When setting the indirect devices as Device/PLC, there was the case that
     online monitor not able to connect to the display.

 7-3 Device/PLC
  <Digital Electronics Corporation General Ethernet>
   - Protocol stack error could remain indicated in passive connection opening.
  <YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet>
   - When driver version is V1.19.05, Device Data Copy Tool does not operate 
     normally in WinGP.
  <YASKAWA Electric Corporation High Speed Ethernet Server>
   - Repetitive file reading with File Read class (0x4C0) into memory could 
     cause display to stop communication.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - An abnormal application termination could occur with WinGP if "Node Name 
     (or) Address" setting was empty.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Array data in a structure in Symbol mode could not always be displayed 
     properly on screen.
   - An abnormal application termination could occur when importing a TPY file 
     in which data type information for arrays is improperly exported by TwinCAT.
  <YOKOGAWA Electric Corporation Personal Computer Link Ethernet>
   - When "Binary" is selected as "Data Code Settings", reading error history 
     with ERH device couldn't set the last byte.
  <Siemens AG SIMATIC S5 CPU Direct>
   - Some DB device settings in PLC could cause communication error with 
     versions 1.13.02 or later.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - When use multiple Tag Data with multiple node setting. The tag data may not 
     deleted normally.

 = V4.03.300 ===================================================================
 7-1 Display Unit
  (Runtime)
  <WinGP>
   - When using Start Application function, there was the case that WinGP
     operation gets slow.
  <Text Table>
   - When using Load Text Table, there was the case that certain characters
     were not displayed correctly.
  <Remote HMI>
   - Although the initial value of disconnect time after communication
     (#H_RemoteHMI_DisconnectMode) passed, there was the case that display does
     not detect it.
  <Ethernet >
   - When GP 4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM)
     received mass of multicast packets, there was the case that display
     operation gets slow.
  <LED>
   - There was the case that SP5B10 stop operating with display's LED blinking
     red and green under the conditions below.
     - When connected with USB mini-B cable (for both Box and Display).
     - When linked up/down with Ethernet Interface (Ethernet 1).
     - When connected with USB-to-serial conversion cable (CA6-USB232-01).

 = V4.03.200 ===================================================================
 7-1 Editor
  (Editor)
  <Display>
   - In the Editor, there were instances when the [Series] field listed unknown
     display types.
  <Transfer tool>
   - Using [CF/SD card connection], you could not copy multiple folders in the
     CF/SD card.

 7-2 Display Unit
  (Runtime)
  <WinGP>
   - On starting the SP5000 series (open box), sometimes all levels on the EZ
     Tower Light flashed red and emitted the buzzer.
   - On the rare occasion, repeated touches caused WinGP operation to freeze.
   - Changing to offline menu may not work.

 = V4.03.100 ===================================================================
 7-1 Editor
  (Editor)
  <Enhanced Recipe>
   - If you registered addresses in the Enhanced Recipe Group, these addresses 
     appear as used in the address setting workspace even after the enhanced 
     recipe group is deleted. Clicking the reference link for one of these deleted
     addresses caused GP-Pro EX to exit unexpectedly.
   - On importing CSV files as recipe data, elements that exceeded the upper 
     limit were imported as invalid data.
  <Project Comparison Tool>
   - Comparing the same project set up with headers or footers on base screens 
     caused the comparison result to be [Different].
  <Display>
   - Convert Resolution did not convert labels on parts properly.
  <Graph>
   - When [Alarm Action] was [Address], [Display Direction] was [Right], [Left]
     or [Bottom], and the shape was not the default, icons for upper and lower 
     limits defined in the [Alarm Settings] did not display properly on the 
     display unit.
  <Function>
   - If you use any application other than GP-Pro EX to create alarm messages, 
     then copy and paste these messages into GP-Pro EX alarms, modifying the 
     message could cause GP-Pro EX to exit unexpectedly.
  <Device/PLC>
   - On selecting [PROFIBUS international], GP-Pro EX occasionally exited 
     unexpectedly.

 7-2 Display Unit
  (Runtime) 
  <Offline>
   - On very rare occasions, changing to offline mode distorted the screen froze
     operations.
  <File Manager>
   - On the SP5000 series Power Box (SP-5B10), viewing a file on a SD card or
     USB storage in the File Manager displayed an invalid value for the file's
     timestamp.
  <Sampling>
   - On the SP5000 series Power Box (SP-5B10), GP4000 series (except GP-4100
     series), and the LT 4000 series, performance for saving sampling data to 
     CSV was poor.
  <WinGP>
   - Continuously using the EZ Tower Light caused WinGP operations to cease.
  <Screen Transfer>
   - Transferring a project to WinGP failed when WinGP was installed on any 
     drive except C drive and the C drive's write filter was enabled.
   - Changing the display unit to offline or transfer mode while running 
     Pro-Server EX's data transfer feature caused the display unit to freeze.
  <Others>
   - On the GP-4000 series (except GP-4100 series, GP-4201TM, and GP-4301TM), if
     you turned OFF the display unit just as the display unit was powering up 
     and about to show the initial screen, on very rare occasions project data 
     on the display unit was erased, requiring you to transfer the project again.
  <Pro-face Remote HMI>
   - Previously, connection passwords could use language dependent symbols.
  <SD card>
   - On very rare occasions, writing to the SD card failed on GP-4000 series
     (except GP-4100 series, GP-4201TM, and GP-4301TM).
  <Call Screen>
   - Nesting base screens and keyboard screens 10 levels or more could cause
     shifting of the display position of parts.
  <Enhanced Recipe>
   - On the SP5000 series Power Box (SP-5B10), performance for editing label 
     names in enhanced recipes was poor.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - While the application was being distributed, restarting the Remote HMI 
   Server prevented the client from connecting to the application screen.
  <Distribution Settings>
   - Even though clients could connect using fixed paths only, the 
     [Distribution Settings] screen's [Application] field accepted relative 
     paths.

 = V4.03.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When editing a project with limited free disk space, the project failed to 
     save. Then, you were unable to open the project.
  <Display>
   - PS/PE-4*00 projects showed the resolution as [1600 x 1200 pixels (UXGA)], 
     regardless of the selected screen size.
  <Enhanced Recipe>
   - Copying and pasting an Enhanced Recipe Group would either paste incorrect 
     data or cause the editor to stop working.
  <Transfer tool>
   - On GP3000 Series (excluding GP-3200 series) or GP4000 Series 
     (excluding GP4000M series and GP-4100 series), if you transferred from the 
     display unit to external storage backup data that included image fonts, 
     and then you ran the [Memory Loader] - [Create Project] command using the 
     backup data, the process would continue indefinitely.
  <Simulation>
   - When the project used many addresses, Simulation occasionally failed to 
     launch.
   - Addresses with bit length of 32 bits would appear as 16 bits in simulation.
  <Project Comparison Tool>
   - When you used the Project Converter then ran the Comparison Tool on the 
     project without saving in GP-Pro EX, the Comparison Tool stopped working.
   - Comparing a project before V3.0 with a project V3.0 or later, 
     the Comparison Tool would display differences even though there were 
     no differences in the editor.
  <I/O Driver>
   - When using the CANopen driver on LT4000 Rear Module Series, the I/O screen 
     and IEC address's ID number would appear as [2] instead of the correct 
     value of [0].
 7-2 Display Unit
  (Runtime)
  <System Menu>
   - Sometimes the system menu did not display on SP5000 (Power Box), 
     PremiumDisplay (SP5500TP / SP5600TP / SP5660TP / SP5700TP).
  <Data Display>
   - When the Data Display's data type was BCD with scale display ON, the 
     scaled value was incorrect.
  <Offline>
   - On the OpenBOX, saving any settings from the offline menu would disrupt 
     communication on COM2.
  <GP-ViewerEX>
   - Connecting the OpenBOX to run time version 3.60 would halt operations.
  <WinGP>
   - Even after disabling the WriteFilter function on the OpenBOX, 
     sometimes the file write operation was not possible from WinGP.
  <Pro-face Remote HMI>
   - On asynchronous screens, enhanced recipe list parts and 
     enhanced recipe data list parts did not appear.
  <I/O Driver>
   - When using the LT4000M's Standard Analog I/O in combination with the 
     CANopen master driver, after running the automatic project transfer 
     command, Standard Analog I/O did not run.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - On Windows 8.1, when magnifying the display to more than 100%, 
     a part of the desktop or application screen did not distribute correctly.

 7-4 Device/PLC
  <Beckhoff Automation GmbH>
   - When reading the same tag data from an array as was referenced by a numeric
     display via address offset on either a window screen or previously displayed
     base screen, the screen would freeze.
   - After selecting the data type in the address input dialog box for bit screen
     parts, GP-Pro EX could end abruptly.
  <Pass-through Function>
   - The SP5000 Series Open Box's the USB mini-B port did not work with the
     Pass-through function.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Starting up the Display was slowed when using the NJ series with many tag
     names with double-byte characters (such as Japanese).
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP-5B10, when there is a communication error with the PLC, although 
     rare, operation would freeze.

 = V4.02.000 ===================================================================
 7-1 Editor
  (Editor)
  <Simulation>
   - Simulation failed to launch on Windows 8.0.
  <Transfer Tool>
   - Could not transfer project data generated by the Version Reverter and saved
     in the editor.
  <Version Reverter>
   - Not all settings were saved to the project after using the reverter, 
     occasionally causing the project to run abnormally on the display unit.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - The name of the box module SP5B10 incorrectly appeared as "SP5B40".
   - After using the offline menu to initialize user memory on the SP5000 
     (Power Box), on restart the unit would start up in Transfer mode.
  <Memory Loader>
   - After transferring the project via USB startup on the GP4000M series, 
     using the Japanese (FEP) keypad caused an error message to appear.
  <Enhanced Recipe>
   - When using the enhanced recipe feature to send recipe data from 
     the display unit to external devices, there were instances when display unit operations froze.
  <Enhanced Recipe>
   - Running [Copy Recipe] in enhanced recipe parts did not copy 
     the [Security level].
  <Filing and Enhanced Recipe>
   - Using filing and enhanced recipes at the same time froze the display unit.
  <Security>
   - After entering the password or user ID in the security screen, the display 
     unit would freeze.
  <WinGP>
   - Immediately after using a USB mini-B cable to download to the SP5000 series
     (Open Box), detaching the USB mini-B cable from the Open Box would cause it to freeze.
  <I/O Driver>
   - After stopping and then resuming the logic, analog input and temperature 
     input did not always start back up.
   - After automatically transferring the project, there were instances when 
     the updated CANopen configuration did not download to slave units.
  <Pro-face Remote HMI>
   - The SP5000 (Power Box) would freeze if it changed to online mode in the
     middle of screen distribution.

 7-3 Pro-face Remote HMI Server
  <Communication>
   - When a client tried to reconnect with the server, the client showed the
     error message "Received an invalid packet" and the client failed to connect.


 = V4.01.000 ===================================================================
 7-1 Editor
  (Editor)
  <I/O Driver>
   - When using the STD4S driver on the LT4000 series and you set the [2 Phase
     Counter] to [0-Preload], even if you turned OFF [Synchronize Output], an
     error (RGEE101) occurred if you changed the preload value. 
  <Window>
   - When you set the [Window Type] to [Word Action] and saved the project,
     restarting the screen editor and reopening the project reverted the
     [Window Control Address] to its default value.
  <Print>
   - When the interface language was Japanese, Korean, Simplified Chinese or
     Traditional Chinese, page breaks were in the wrong spots, causing blank
     pages.
  <Logic>
   - When you made subroutines with many steps, the logic program editor's
     performance would degrade.

 7-2 Display Unit
  (Runtime)
  <Historical Trend Graph>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when you displayed historical data and showed the cursor, the graph
     display was abnormal.
  <Simulation>
   - The simulation function in GP-Pro EX V4.0 had high CPU usage. 
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), the screen distorted 
     when changing to offline mode.
  <Display>
   - On the SP5000 series Open Box (SP-5B40), when you set advanced display
     in the project data settings and premium display for the display module, 
     either the screen did not display as a full screen, or the screen's right
     or bottom side extended beyond view. 
  <Picture Display>
   - Just at the moment you ran a screen capture, if the unit changed 
     to offline or transfer mode, the run time would freeze.
 7-3 Device/PLC
  <Beckhoff Automation GmbH TwinCAT ADS/AMS Driver>
   - D-Script memory copy (from PLC to display) copies only the first address 
     point in [Symbol] mode.
   - Reading STRING symbols results in error in [Symbol] mode.
   - Use of offset may cause a text display to read data from a wrong address in 
     [Tag] mode.
   - Data in TOD and DT arrays may not be displayed properly in [Tag] mode.
   - GP-Pro EX may abruptly be terminated if nodes in [Tag] mode and ones in 
     [Symbol] mode are mixed in one project.
   - Reading STRING symbols with more than 1414 characters in total in one 
     screen may result in error.
   - Pro-Server EX allows tag data to be created and edited which can lead to
     a mismatch with tag data in GP-Pro EX projects.
  <Panasonic SUNX FPSeries cimputer Link SIO>
   - Send monitor command when shuddown the path throgh evenif setting don't use
     monitor command.
  <OMRON CS/CJ/NJ Series EtherNet/IP Driver>
   - Couldn't display odd elements of String variables on Omron PLC NJ 
     in the Data Display.


 = V4.00.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When a project included base screens set up with parts that referenced
     other base screens, moving or copying parts took longer than expected.
  <Logic Monitor>
   - When running Online Monitor over a network, the connection failed and
     showed error "Code=8".
  <Workspace>
   - In the Address workspace, double-clicking the [Feature], [Location], or
     [Screen] column reverted the list to its default sort settings.
   - The Parts Toolbox and Shape Browser showed 65,535 colors instead
     of 65,536 colors.
  <Error Check>
   - When working with a LT4000 series project with an Italian,
     Chinese (Simplified) or Korean interface, an error appeared during
     error check even though there were no errors in the project.
   - An incorrect warning message displayed when the text table language
     did not match the parts and common settings using the text table.
   - Even if function block instructions exceeded the limit, there was no
     error at error check when [Share Local Variables in Function Blocks]
     was set to do not share.
  <Graph>
   - [Semicircle Graph] did not display correctly,
     when the display unit's [Orientation] was [Landscape].
  <Properties>
   - The blink setting was available even though the display unit did not
     support blink.
  <Enhanced Recipe>
   - If you sorted by all the items in the [Recipe Group] element list,
     ran [Undo] or [Redo], and then removed an element, the application ended
     abruptly.
  <Function Block>
   - You could not use the keyboard to assign a Timer variable, Counter
     variable, or PID variable to an instructions's input or output operand.
  <Version Reverter>
   - When you saved a project with GP4201TM(Modular Type) to version
     [V3.00 - V3.01], you could not open the project in the associated
     version of GP-Pro EX.
   - When you saved a project with GP-4301TM(Modular Type) and [Enable
     Ethernet Multilink] to version [V3.00 - V3.01], sometimes opening the
     project in the associated version of GP-Pro EX disabled [Enable Ethernet
     Multilink].
   - Even though you were not supposed to be able to save a
     GP-4201TM(Modular Type) or GP-4301TM(Modular Type) project set up with
     tag data on its PLC/Device to version [V3.00 - V3.01], the save operation
     may have run.
  <Transfer Tool>
   - When running [Compare Project], some of the differences in the [Text
     Table] settings appeared as [Exclusive Screen] differences.
   - After running [Reduce Images to 16-Bit Colors] on an image part set to
     16,777,216 colors, running [Transfer Project] caused an error message to
     display.
  <Project Converter>
   - There were cases when you could not convert sampling groups associated
     with a historical trend graph that was grouped with other objects.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - After saving a project without changing any offline mode settings, there
     were some differences when compared with a project with the same settings.
   - After initializing SRAM from the WinGP offline menu, an error occasionally
     occurred when running CF->SRAM Transfer or SD->SRAM transfer.
   - On the LT3300 series and GP3300 series (except for GP-3310, GP-3360),
     the [Main Unit]-[Ethernet Local Settings] did not show the MAC address
     correctly.
   - When real-time printing of the alarm setting is enable ,if it shifts to 
     offline mode after alarm generating, operations would freeze.
  <Security>
   - When security was enabled, you could not use Internet Explorer to access 
     the FTP server.
  <Picture Display>
   - When using image fonts in a picture display, running the [Clearing action]
     occasionally erased area outside the picture.
   - The mark display was occasionally distorted when two or more picture 
     displays showed mark images on the same screen.
   - On the GP-4201TM or GP-4301TM, when you used a picture display to move 
     a mark, occasionally after-images remained of the mark in its original 
     position.
  <EZ Fingerprint Recognition Unit>
   - Updating unregistered fingerprint data appeared as a normal operation 
     when it should have been an error.
  <Memory Loader>
   - After using the Transfer Tool to download Memory Loader backup data, 
     comparison showed differences between internal data and storage.
  <Screen Transfer>
   - When the write filter setting was enabled and you tranferred to WinGP, 
     on restarting WinGP, it started in transfer mode. 
   - Project transfer failed after you disabled the write filter setting 
     while WinGP was running.
   - Operations would freeze when transferring a project while there was 
     a Pro-Server EX data transfer error.
  <CSV Display>
   - Editing or saving the CSV file in the CSV display occasionally changed 
     the CSV file name.
  <Operation Log>
   - Running the SD->SRAM transfer command from the offline menu occasionally 
     added invalid content in the operation log.
  <Message Display>
   - The first time after a screen change the message display showed correctly,
     but messages did not update.
  <I/O driver>
   - On the LT4000 series with the STD4S driver, even though you ran the PCHQ 
     (pulse catch input clear) instruction, it occasionally did not clear 
     the status of the pulse catch.
   - On the LT4000 series with the STD4S driver, even though you ran the HSCQ 
     (stop high-speed counter) instruction, it occasionally did not change 
     the status of the high-speed counter.
   - On the LT4000 series with the STD4S driver, after the special I/O parameter 
     error's system variable (#L_ExIOSpParmErr) showed an error status,
     you were unable to change it back to normal status.
  <Date/Time>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM)
     the date/time would reset to "2000/00/00 00:00:00".
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when the SD card was not mounted and the SD Card Free Space (Memory Card
     Setting) was enabled, for 5 seconds after booting, the date and time showed
     "2000/00/00 00:00:00".
  <Others>
   - When there are frequent communication errors with the PLC, although rare,
     operations would freeze.
   - On WinGP, when the save destination for historical data was a folder and 
     the free disk space was zero, an error message did not appear even though 
     backup data could not save.
 
 7-3 Device/PLC
  <Digital Electronics Corporation Memory Link>
  <Digital Electronics Corporation General Ethernet>
  <Digital Electronics Corporation General SIO>
  <Schneider Electric SA MODBUS slave>
   - The Wait To Send time observed in communication may not be the same as
     the value which has been set in the Wait To Send parameter.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - For a connection with multiple NJ Series which share the same Tag Data,
     Numeric Data Displays do not display the correct PLC data. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - On startup of the display unit, an SIO Error may occur rarely.
  <Schneider Electric SA Uni-Telway>
   - A Timeout Error may occur. 
   - When the "Reference / Channel" is set to a value other than 0 
     in the Device-Specific Settings, communication does not work. 
  <Rockwell Automation EtherNet/IP>
   - Depending on the connection configuration,
     part of the Equipment Module Tag Data that is listed in 
     the Connection Manual is not imported. 

================================================================================
Copyright (C) 2014 Digital Electronics Corporation. All Rights Reserved.
"The Terms and Conditions of Software License Agreement" of Digital Electronics
Corporation do not apply to Adobe Systems products.
All product names in this document are registered trademarks or trademarks of
their respective owners.
Pro-face is a registered trademark of Digital Electronics Corporation in Japan,
U.S.A., Canada, Europe and other areas and countries.
No part of this document may be used or reproduced without permission.
****************************  End of Release Note  *****************************