*****************************   GP-Pro EX Ver.4.09  ****************************
                                                                        Dec 2019
                                               Schneider Electric Japan Holdings

Preface

Thank you for using GP-Pro EX.
GP-Pro EX is software to create logic programs and screen data for graphical 
operation touch panels.
The Windows environment ensures operability and high performance.
Please visit the Pro-face website (https://www.proface.com/en/) for the latest
information.

Table of Contents
(0) Version
(1) New Features List
 = V4.09.100 =====
 1-1 Support of New Features
 = V4.08.200 =====
 1-1 Support of New Features
 = V4.08.100 =====
 1-1 Support of New Features
 = V4.08.000 =====
 1-1 Support of New Features
 = V4.07.300 =====
 1-1 Support of New Features
 = V4.07.200 =====
 1-1 Support of New Features
 = V4.07.100 =====
 1-1 Support of New Features
 = V4.07.000 =====
 1-1 Support of New Features
 = V4.06.300 =====
 1-1 Support of New Features
 = V4.06.100 =====
 1-1 Support of New Features
 = V4.06.000 =====
 1-1 Support of New Features
 = V4.05.100 =====
 1-1 Support of New Features
 = V4.05.000 =====
 1-1 Support of New Features
 = V4.04.000 =====
 1-1 Support of New Features
 = V4.03.300 =====
 1-1 Support of New Features
 = V4.03.100 =====
 1-1 Support of New Features
 = V4.03.000 =====
 1-1 Support of New Features
 = V4.02.000 =====
 1-1 Support of New Features
 = V4.01.000 =====
 1-1 Support of New Features
 = V4.00.000 =====
 1-1 Support of New Features
(2) Limitations
 2-1 Editor
 2-2 Display Unit
 2-3 Device/PLC
 2-4 WinGP
 2-5 Pro-face Remote HMI Server
(3) When Serial No. and License Key Code are not input
(4) Installation and Uninstallation
 4-1 Installation
 4-2 Uninstallation
(5) User Registration
(6) Manuals
(7) Fixed Defects
 = V4.09.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.101 =====
 7-1 Installation
 = V4.08.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.101 =====
 7-1 Display Unit
 = V4.07.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.000 =====
 7-1 Installation
 7-2 Editor
 7-3 Display Unit
 7-4 Device/PLC
 = V4.06.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.101 =====
 7-1 Installation
 = V4.06.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.05.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.05.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.04.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.04.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.400 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.300 =====
 7-1 Display Unit
 = V4.03.200 =====
 7-1 Editor
 7-2 Display Unit
 = V4.03.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.03.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.02.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.01.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.00.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC

Contents
================================================================================
(0) Version
 Editor:               Ver.4.09.100
 System/Runtime:       Ver.4.9.10
 Sub-system/OS Core:   Ver.4.9.10  (SP5B10, GP4000 series, LT4000 series,
                                   except for GP4000M series, GP410* series)
                       Ver.1.3.10  (GP4000M series)
                       Ver.1.1.3  (GP-4104)
                       Ver.1.3.6  (GP-4105, GP-4106, GP-4107)
                       Ver.3.6.5  (GP3400 series, GP3500 series, GP3600 series, 
                                   GP3700 series)
                       Ver.3.6.0  (ST3000 series, GP-3200 series, AGP3310HT,
                                   AGP3300HS/HL)
                       Ver.3.6.3  (LT-3300 series, AGP3300T/U/S/L, AGP3301S/L)
                       Ver.3.5.1  (Other than above models)
 Memory Loader:        Ver.4.9.10

(1) New Features List
 = V4.09.100 ===================================================================
  <New Feature>
   - You can now send E-mail from the display unit.
       * It needs .Net Framework Ver. 4.5 or later to use this feature.
  <Sampling>
   - You can now add the hours, minutes, and seconds to the CSV file name of
     sampling data.
  <Alarms>
   - You can now add the hours, minutes, and seconds to the CSV file name of
     exported alarms.
  <Offline>
   - Only part of the input value display and the key code display for GP-Viewer
     and Remote PC Access functions are shown.
  <Communication Driver>
   - Newly-added communication driver
     The following is now supported.
      - CRRC Train Real Time Data Protocol
      - SAE International J1939
      - KEYENCE Corporation KV MODE (HOST LINK) SIO
      - Shenzhen Inovance technology Modbus RTU Mode
   - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
     - The address range for KV7000 Series has been increased (R999->R1999).
   - Panasonic IndustrialDevices SUNX MEWTOCOL-COM Ethernet
     - FP0H and FP2H+ET-LAN2 are now supported.
   - Siemens AG TIA Portal Ethernet
     - TIA Portal V15.1 is now supported.
   - OMRON Corporation CS/CJ/NJ Series EtherNet/IP
     - In the Input Address screen, the filter display function is now supported
       when entering tags.
   - JTEKT Corporation TOYOPUC CMP-LINK SIO
   - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
     - PC10G-CPU supported devices are now expanded.

   <Extended Scripts>
   - Error handling of _decasc2bin() in User Defined functions now improved.
   <Others>
   - Only part of the key code display for Version Information of the screen
     editor is shown.

 = V4.08.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - SP5000 Series SP-5B00 and SP-5B90 are now supported.
   - SP-5B00, SP-5B10 and SP-5B41 now support the following display module.
      -  SP-5600TA (XGA)
   - SP-5B90 now supports the following display modules.
      -  SP-5490WA (WVGA)
      -  SP-5690WA (WXGA)
      -  SP-5790WA (FWXGA)
  <New feature>
   - Combine the SP5000 Series Open Box (SP-5B41) with a DC Power Adapter to 
     support a high resolution.
  <Operation Log>
   - You can now save the following part operations to the operation log from 
     Remote HMI.
      - Data Display
      - Special Data Display (Show CSV)
      - Sampling Data Display
  <Communication Driver>
   - Beckhoff Automation GmbH TwinCAT ADS/AMS
     - RETAIN Type is now supported.
   - Siemens AG TIA Portal Ethernet
     - TIA Portal project size indicator now added to 
       the Individual Device Settings dialog box.
  <Others>
   - PS5001B Atom Box is now supported.
  
 
 = V4.08.100 ===================================================================
 1-1 Support of New Feature
  <Others>
   - The run time for GP-4201TM (Modular Type) and GP-4301TM (Modular Type) 
     units has been updated for future changes to parts on the display unit.
  <Communication Driver>
   - The latest manuals are not installed with version GP-Pro EX 4.08.100.
     Please get the latest manuals from our home page.
     http://www.pro-face.com/trans/en/manual/1001.html

   - Beckhoff Automation GmbH TwinCAT ADS/AMS
     TPY files created on Build Version.4016.28 are now supported.
   - Siemens AG TIA Portal Ethernet
     TIA Portal V15 is now supported
   - Crouzet Millenium 3 FBD
     Now supported in WinGP.
   - ODVA EtherNet/IP Explicit Messaging
     - Added Real Time Format selection.
     - Added Customer Explicit Message setting.
   - Schneider Electric SA MODBUS SIO Master
   - Schneider Electric SA MODBUS TCP Master
     Modicon M221 series is now supported.
  
 
 = V4.08.000 ===================================================================
 1-1 Support of New Feature
  <Supported models>
   - DC Power Supply Adapter for SP5000 Series Power Box is now supported.
  <NEW functionality>
   - You can now set up multiple character keys with Key parts.
  <Operation Log>
   - You can now save Remote HMI operations to the operation log.
  <Online Update>
   - You can now install the newest version of GP-Pro EX directly
     from an existing installation of GP-Pro EX.
  <Communication Driver>
     - Mitsubishi Electric Corporation A Series Computer Link
     - Mitsubishi Electric Corporation FX Series Computer Link
       - Format 1 control protocol is now supported.
     - Rockwell Automation, Inc. EtherNet/IP
       - RSLogix 5000 version 30 is now supported.

 = V4.07.300 ===================================================================
 1-1 Support of New Feature
  <Supported models>
   - The SP5000 Series Open Box (SP-5B41) and Power Box (SP-5B10) now support
     the following display modules:
      -  SP-5700WC (FWXGA)
      -  SP-5800WC (FWXGA)
   - The following display modules now support VM Unit(GP3000-VM01) and
     RGB Input Unit(GP3000-RGB201):
      -  GP-4621T
      -  GP-4521T
   - The following model is now supported.
      -  GP-4115T3
  <Communication Driver>
     - Siemens AG TIA Portal Ethernet
       - TIA Portal V14 is now supported.

 = V4.07.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4200 Series and GP4300 Series.
  <NEW functionality>
   - SP5000 Series Power Box (SP5B10) now supports I/O driver listed below.
      -  FLEXNETWORK
      -  CANopen

 = V4.07.100 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4400 Series, GP4500 Series, and
     GP4600 Series.
  <NEW functionality>
   - Pro-face Connect is now supported.
  <Communication Driver>
   - Newly-added communication driver 
     The following features supported.
     YASKAWA INFORMATION SYSTEMS MMCloud TCP Client.

 = V4.07.000 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - GP-4G01 is now supported.
   - SP5000 Series Open Box (SP-5B41) is now supported.

  <Sampling>
   - You can now append the date and time to sampling CSV file names.
   - You can now transfer sampling CSV files to an FTP server.

 = V4.06.300 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - DC Power Supply Adapter for SP5000 Series Open Box is now supported.

  <Simulation>
   - External PLC simulator now supports GX-Works2/GX-Works3.

  <Communication Driver>
   - Function version upgraded communication driver
     The following features supported
     - Siemens AG TIA Portal Ethernet
       - The following settings were added
         - SP5000 Series
         - GP4000 Series
         - GP4100 Series(GP4114)
     -PROFIBUS International PROFIBUS DP Slave
       - SP5000 Series(SP-5B10)
     -OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Tag search
       - Remove array item number zero limitation
       - Support LREAL Tag type (Convert to 32 bits Float type) (Only NJ Series)
     -YASKAWA Electric Corporation INVERTER/SERVO SIO
       - Support GA700 Series
     -YASKAWA Electric Corporation MP Ethernet/MECHATROLINK
       - Support Sigma-7C
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - Expand MR device address(Max MR999 to MR3999) for KV-7500 CPU.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet(SLMP Client)
       - Passed CC-Link Certification
       - Support iQ-R New CPU
       - Support other station access command
       - Changed driver name (Added [SLMP Client])

  <Others>
   - WinGP now supports Windows 10.

 = V4.06.100 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - SP5000 Series Open Box (SP5B40) now supports the following display modules:
     - SP-5600TP  SVGA (800*600)
     - SP-5660TP  SVGA (800*600)
     - SP-5700TP  SVGA (800*600)
  <NEW functionality>
   - SP5000 Series Power Box (SP-5B10) now supports display modules with 9-point
     calibration settings.
  <Editor>
   - The [Do not transfer all if no change in project] option is now available
     in the [Save as] dialog box.
  <Enhanced Recipe>
   - You can now use system variables to check the recipe label of enhanced
     recipes.
  <Transfer Tool>
   - You can now edit a display unit's [Ethernet] settings from
     the Transfer Tool.
  <Others>
   - You can now use system variables to check the project file name.

 = V4.06.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - GP-4311HT is now supported.

 = V4.05.100 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - On the Open Box, you can now use WinGP to check the status of 
     the operating system's Enhanced Writer Filter (EWF).

 = V4.05.000 ===================================================================
 1-1 Support of New Features
  <Supported models>
   - The following 3 models are now supported.
     - GP-4114T
     - GP-4115T
     - GP-4116T

  <Pro-face Remote HMI>
   - You can now use the device/PLC to change screens on Remote HMI (client) set
     to asynchronous mode.

  <Communication Driver>
   - Function version upgraded communication driver
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Pass-Through function supported.
     - YASKAWA Electric Corporation MP Ethernet/MECHATROLINK Driver
       - The driver name changed from "MP/INVERTER/SERVO Ethernet" to
         "MP Ethernet/MECHATROLINK".
       - R7G4HML3-LC2 of M-System Co., Ltd now supported.
       - K1G of Azbil Corporation now supported.
     - Cognex Corporation In-Sight Vision Systems
       - In-Sight 7000 now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
       - KV-7000/KV-Nano Series now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - KV-7000/KV-Nano Series now supported.

  <Others>
   - PS-5000, PS/PE-4*00 series and PC/AT now support portrait orientation.
   - The following products now run on Windows 10.
     - GP-Pro EX (screen editor)
     - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - Device Data Copy Tool
     - Pro-face Remote HMI Server
     - GP-Viewer EX

 = V4.04.000 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - WinGP now supports True Colors for Image and JPEG files.
   - WinGP now supports high resolution for PS-5000, PS/PE-4*00 series 
     and PC/AT.
   - The Project Converter now supports LT3300T.
   - You can now enter the GP-Viewer EX key code from the Transfer Tool.
   - WinGP now supports PS-5000 series.
   
  <Others>
   - WinGP SDK now runs on Microsoft .Net Framework 4.0.
   
  <Communication Driver>
   - Newly-added communication driver 
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
     - Panasonic Industrial Devices SUNX MEWTOCOL7-COM Ethernet
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Custom Explicit now supports "Get Attribute Single" Service (0x0e) and
         "Set Attribute Single" Service (0x10).
     - Azbil Corporation Controller (CPL)
       - Burner Controller BC-R series now supported.
     - Mitsubishi Electric Corporation Q/QnA Series Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Mitsubishi Electric Corporation Q Series QnU CPU Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Rockwell Automation, Inc. EtherNet/IP
       - When automatic port number allocation is enabled, you can now configure
         Individual Device Settings to one physical target PLC for both the 
         "ControlLogix/CompactLogix Series" and 
         "Control/Compact/Flex Logix Series Native".
     - JTEKT Corporation TOYOPUC CMP-LINK SIO
       - PC10G-CPU now supported.
       - PC3JG-CPU's EB device now supported.
     - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
       - PC3JG-CPU's EB device now supported.
       - Relay communication now supported.
     - Azbil Corporation MODBUS SIO Master
       - Series name change from KG to K1G.
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - AMS NetID setting now supported in offline mode.
     - Pass-Through Function Setting Tool
       - Timeout setting now supported.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Label import function now supported (iQ-R series only).
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
       - Change in maker name.
         Panasonic Electric Works SUNX Co., Ltd. 
         -> Panasonic Industrial Devices SUNX
     - Seiko Epson Corporation Remote Ethernet
       - A new device now supported.
     - Siemens AG SIMATIC S7 MPI Direct
       - Tag import dialog box now improved.
     - Siemens AG SIMATIC S7 Ethernet
       - Tag import dialog box now improved.

 = V4.03.300 ===================================================================
 1-1 Support of New Features
  <Others>
   - GP4000 series (except for GP4100 series, GP-4201TM and GP-4301TM)
     supported compatible parts for stable service.
 = V4.03.100 ===================================================================
 1-1 Support of New Features
  <Device/Option Support>
   - You can now expand the user screen area in AGP-3560T.
 
 = V4.03.000 ===================================================================
 1-1 Support of New Features
  <Enhanced Recipe>
   - You can now check search results from a recipe list part by using system 
     variables.
   - You can now use a system variable to copy, save, and reload recipes. 
   - You can now receive recipe labels.

  <Runtime Improvements>
   - The File Manager can now use the Remove DEL Key feature with CF/SD cards.

  <Pro-face Remote HMI>
   - Pro-face Remote HMI is now available in WinGP.
   - Pro-face Remote HMI now supports multiple client connections.

  <Communication Driver>
   - Function version upgraded communication driver
     - OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Added support for double-byte characters on the NJ series.
     - YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet
       - Sigma-7 series is supported.

 = V4.02.000 ===================================================================
 1-1 Support of New Features
  <Pro-face Remote HMI Server>
   - In the Common Settings, you can now set up [No timeout] for the timeout
     time.

  <Pro-face Remote HMI>
   - In the Common Settings, you can now set up [No timeout] for the timeout 
     time.
   - When communication is unstable, you can now define a timer for terminating
     the connection.

  <NEW functionality>
   - When using the Start application command, you now have the option to 
     suppress WinGP CPU usage.

  <Communication Driver>
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Implicit messaging now supported.
       - Custom Explicit message now supported.
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200) Device Data Copy Tool
       - Now supports VGA display.
     - YASKAWA Electric Corporation MEMOBUS Ethernet Device Data Copy Tool
       - Added support for new transfer files. (Maintenance Monitor Setting, 
         FTP Client definition.)

  <Others>
   - The following products now run on Windows 8.1.
     - GP-Pro EX (screen editor)
       - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - WinGP
     - WinGP SDK
     - Device Data Copy Tool
   - Open Box (SP5B40) models now support portrait orientation.
   - The following now support VGA display:
     - SP5000 series
         (Box Module)
           - SP-5B10
         (Display Module)
           - SP-5500TP
           - SP-5600TP
           - SP-5660TP
           - SP-5700TP

 = V4.01.000 ===================================================================
 1-1 Support of New Features
  <Editor Improvements>
   - You can now import the recipe data of enhanced recipes.

  <Runtime Improvements>
   - Importing/exporting enhanced recipes
    You can now import and export element labels and recipe labels. 
   - Enhanced recipe search
    You can now use system variables to search for enhanced recipes.
   - Mapped address
    You can now edit enhanced recipe element values on the device/PLC.
   - Send options
    When transferring an enhanced recipe to a device/PLC, you can write 
    the enhanced recipe's label and ID to the defined address. 

  <Communication Driver>
   - Function version upgraded communication driver
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - Support TwinCAT3.
       - Reading a large number of array elements has been optimized.


 = V4.00.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - The following models are now supported:
     - GP-4000M (Rear Modular Type)
     - SP5000 series
         (Box Module)
           - SP-5B10
           - SP-5B40
         (Display Module)
           - SP-5400WA WVGA(800*480)
           - SP-5500WA WXGA(1280*800)
           - SP-5500TP SVGA(800*600)
           - SP-5600TP XGA(1024*768)
           - SP-5660TP XGA(1024*768)
           - SP-5600WA WXGA(1280*800)
           - SP-5700TP XGA(1024*768)

  <Pro-face Remote HMI>
   - Pro-face Remote HMI Server function is now supported.
   - Pro-face Remote HMI function is now supported on the SP5000 Series.
   - Pro-face Remote HMI function is now supported on the GP-4000M Series.
   - Server list screen now supports monitoring triggered alarms.

  <Editor Improvements>
   - You can now create a project using
     [Create Project From Configuration File (Pro-face Device Configurator)].
     
  <Communication Driver>
   - Newly-added communication driver 
     - CoDeSys Automation Alliance CoDeSys Ethernet
     - CoDeSys Automation Alliance CoDeSys SIO
     - Control Techniques MODBUS SIO Master
     - Control Techniques MODBUS TCP Master
     - IEC Standard IEC 60870-5-101
     - Siemens AG Ethernet Gateway MPI/PROFIBUS
   - Function version upgraded communication driver
       - Mitsubishi Electric Corporation FX Series CPU Direct
           The following setting was added: 
             FX3S Series is supported.


(2) Limitations
 2-1 Editor
  <Screen Editor>
   - #H_ScanOffControl does not appear in the Address and Cross Reference
     windows.
   - If you use the version reverter on a project set up with a sampling group
     associated with consecutive addresses and sampling words of 2 or more, 
     the project may not be converted or the sampling settings may be deleted.
   - Sometimes dragging parts from one screen editor and dropping to another
     does not produce a copy.
   - When memory usage on the computer is high, and the project data exceeds 
     the maximum size, the project information may show the project 
     transmission size as 0 bytes (0.0%).
  <Graph>
   - If you draw an XY Historical Trend Graph or XY Data Block Graph on
     base screen 9000 or higher, the graph display area will not appear on
     the display unit nor in simulation.
  <Project Comparison Tool>
   - Comparison result of [Device/PLC settings] may appear as "Different"
     though project files have same [Device/PLC] Settings.
  <Online update>
   - On Windows XP and Windows Vista, you can not download modules
     with OnlineUpdate. Please download the module from our support site
     "Otasuke Pro!".
  <Copy From Other Project>
   - While copying from another project that is very large, sometimes the screen
     editor will close unexpectedly. When that happens, split screens into 2 and
     perform copy operations separately.
  <Others>
   - The screen editor does not support the Windows 10 feature [Beta: Use
     Unicode UTF-8 for worldwide language support].

 2-2 Display Unit
  (Runtime)
  <USB Device>
   - When a USB device is inserted/removed, all USB devices may not become 
     disabled under the condition that five or more USB devices are connected 
     at the same time using the USB HUB in GP-4000 series. 
     If this phenomenon occurs, reset the Display.
  <Data Display>
   - When two or more Data Displays with "Indirect" specified are made to be 
     invisible at the same time while displaying a pop-up keypad, some Data 
     Display may not be invisible.
  <RPA>
   - A keypad is closed while the [Alt] key on the keypad of the RPA 
     Window Display is held down. When the keypad is opened next time, 
     the [Alt] key remains held down.
  <USB/SIO>
   - Do not use a logic program during communication with a Device/PLC using 
     a USB/SIO (RS422/485).
     If the logic program is used in the situation, a communication error 
     may occur.
  <Online Monitor>
   - Display of instructions in the logic monitor and online monitor are
     sometimes different.
  <Logic Program>
   - In GP4000 series (except for GP-4100 series) and LT4000 series, the buzzer 
     sound in Ver. 3.5 is different from that in Ver. lower than 3.5.
   - While logic is stopped on the GP-4G01, if you press and hold down
     both the [USB1] and [SD] removal switches at the same time, 
     the [PWR] LED lights start flashing irregularly.
  <EZ Fingerprint Recognition Unit>
   - Do not attach/detach the fingerprint authentication unit while turning on
     the power to the Display. Doing so, inconsistency occurs between the
     security data and the fingerprint data and the display of the
     authentication and the password setting may not operate normally. 
     If an inconsistency occurs between them due to attachment/detachment of the
     fingerprint authentication unit, update the fingerprint data of the
     fingerprint authentication unit using the "Update DB" function.
  <Screen Transfer>
   - Do not attach/detach the transfer cable while transferring to the SP5000 
     Series Open Box (SP-5B40). Even if the cable is detached, the unit will not
     detect an error.
   - On the Power Box(SP-5B10) of the SP5000 series, In the case of forced 
     transfer mode, you cannot transfer using LAN2.
   - If the project is large and many functions are set up, the display unit
     may restart repeatedly after transfer.
  <Bit Momentary Switch>
   - Compared to other series, the buzzer for the Open Box's (SP-5B40) Bit 
     Momentary switch sounds different.
  <System Menu>
   - The Windows task bar flickers if you continually trigger the system menu's
     display operation (simultaneously touch the top-right and bottom-left
     corners) on the SP5000 series Open Box (SP-5B40).
   - On models that support 2-point touch, while the first touch is initiated
     and you work with the system menu, system menu operations may not work.
     Display the system menu again and menu operations become available.
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), even though there are no devices
     connected, in the offline menu, the Peripheral Settings screen's USB Screen
     shows USB equipment.
   - On the GP4200 Series, GP4300 Series, and LT4000 Series, you cannot edit
     Web Server settings offline.
   - With the SP5000 Series Power Box (SP-5B10) and WinGP, do not touch
     the top-right or top-left corners while starting up. 
     While normally this would take you to offline mode, there are certain
     circumstances when this will not work.
   - If you displayed SRAM usage right after initializing SRAM,
     the SRAM usage graph may be off by several pixels.
  <Memory Loader>
   - On the GP-4100 Series (Color Model), if you download the different CML file
     in a row without ending the memory loader, SRAM may be initialized
     after restarting the display unit.
  <Image Parts>
   - When the [Compress] check box is selected, transparency may not display
     properly.
  <Enhanced Recipe>
   - Search results may not display if you use system variables to search
     for a recipe, while deleting a recipe in an Enhanced Recipe List part.
     When this occurs, reset the display unit.
   - When there are a large number of recipes, importing recipes may take
     considerably longer than it did in Ver.4.6.10.
   - On the display unit, you can add enhanced recipe data to a project even if
     it exceeds 100% of its maximum transfer size. On the editor, if you use the 
     Receive Project command to get the project from the display unit, 
     you may not be able to transfer the project back to the display unit 
     due to a transfer size error.
   - If you set up a variable with less than 32 words as the label's destination
     address, the enhanced recipe may not work properly.
  <Change screen>
   - If you use a Word Add or Word Subtract switch on a device address
     that is used to define the screen number in a change screen switch, 
     the expected screen may not display if you change screens quickly.
     To reliably change screens, use a Selector switch.
  <External Buzzer Output>
   - When [Display Unit] - [Operation] - [Output to External Buzzer Terminal]
     is enabled on the GP3300H or GP4000H series, the GP3000H conversion adapter
     emits the external buzzer for the following operations from the maintenance
     menu.
     - Check Pattern
     - Check Touch Panel
     - Calibrate Touch Panel
     - Check COM1/COM2/LAN
     - Memory Info
     - Check Function Switch
  <Pro-face Remote HMI>
   - On the GP-4621T or GP-4521T, video module images of VM Unit and RGP Input Unit
     do not display on the Remote HMI client side.
   - When connecting to OpenBox, occasionally screen distribution
     may be delayed.
   - When the Pro-face Remote HMI is connected to HMI via the EZ LAN Adapter,
     you may not be able to reconnect automatically when unplugging
     then plugging back in the EZ LAN Adapter.
     Please return to the server list and reconnect.
   - Do not operate the SD/USB switches from a client.
     You can perform Memory Loader operations only from the display unit itself,
     and therefore are unavailable from the client.
  <File Manager>
   - Occasionally the File Manager does not sort its operation
     log's output files in file creation order.
   - While all items are selected in the File Manager with the [All] button,
     and the FTP server connection is released, the [All] button becomes
     highlighted. If this occurs, close the File Manager and open again.
   - While the "Confirm Delete" message box displays as a result of touching
     the [DEL] button in the File Manager, if you attach or detach USB memory
     the File Manager does not display the files in USB storage.
     If this occurs, close the File Manager and open again.
   - When the File Manager is connected to the FTP server and
     a file is not selected, sometimes the file date, time, and size may display
     incorrectly. If this happens, select a file in the File Manager.
   - Selecting either [Cancel] or [No] in a File Manager connected to
     the FTP server sometimes causes the date, time, and size of the wrong file
     to display. If this happens, select another file in the File Manager.
   - When the File Manager is connected to the FTP server and a copy file
     operation fails, the incorrect file name may appear in
     the confirmation message box.
  <Screen capture>
   - In the destination, if you specify an FTP server with PASV disabled,
     file write may fail and a 0-byte sized file may be created
     in the destination folder.
  <Feature>
   - When using GP4000M or LT4000M Series, restarting the display unit will erase
     the Japanese FEP information.
  <Pro-face Connect>
   - When connecting multiple SiteManager Extend and LinkManager to an Open Box
     set up with SiteManager, Pro-Server EX may not operate properly on some of
     the LinkManager.
   - Sending or receiving large projects via LinkManager fails sometimes.
   - If LinkManager is already installed and you install LinkManager again,
     sometimes the existing shortcut is not deleted and results in duplicate
     shortcuts.
   - If you forcibly transfer via Link Manager a project to a display unit
     set up as the agent of Site Manager Extend, the transfer operation
     sometimes fails.
   - With SiteManager Embedded, the Transfer Tool, GP-Viewer EX and Pro-Server
     may not be able to automatically detect display units.
   - With SiteManager Embedded, you can use only ASCII text for
     the Proxy Password.
   - Brightness
     On the GP-4100 Series color model, while power is supplied from 
     the USB (mini-B) interface and power is also supplied by 
     the DC power supply, the screen brightness will not match the defined value.
     Remove the cable from the USB (mini-B) interface before turning on the power.
  <Time zones>
   - Sometimes the "Automatically adjust daylight saving time" setting
     changes on the GP-5B40 and SP-5B41.
  <E-mail>
   - When there is no body of E-mail, its subject may be not shown correctly.
     To avoid this situation, set one or more characters to its body.
  <Others>
   - Turning on the display unit with the SD card inserted, it may take a few
     seconds longer to show the initial screen.
  <Start application>
   - The feature has been designed to execute external applications.
     External applications may increase security risk and harm the system.
     Review the usage of this feature before transferring.
 2-3 Device/PLC
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - In Pro-Server EX's Device Monitor function 
     when a Multiple Bit Write operation is performed on an array type Tag 
     it may not write correctly. 
   - When single bit write operation is performed on a 32-bit Tag(DINT), 
     the 16th bit cannot be written. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - When a Copy / Paste operation which results in the maximum number of Tags
     being exceeded no error is displayed. 
   - When several Tag Data Files are created, the maximum number of Tags 
     may not be checked correctly. 
  <TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200)>
   - In Pro-Server EX's Device Monitor function the Multiple Bit Write 
     operation may not work in some cases.
  <Fuji Electric Co., Ltd. MICREX-SX Series SIO>
   - Do not use "Indirect" setting for the String type. If it is specified, 
     data may not be displayed normally.
   - When STRING variables are displayed in Device Monitor of Pro-Server EX, 
     only two characters are displayed.
  <GE Fanuc Automation Series 90-30/70 SNP>
   - Some spelling mistakes are found in English error messages.
  <GE Fanuc Automation Series 90-30/70 SNP-X>
   - If an error occurs during communication, set "1" or larger value 
     for Retry Count.
  <Mitsubishi Heavy Industries, Ltd MHI STEP3 Ethernet>
   - When a bit device is specified in Alarm Summary, alarms of 17th bit or 
     later are not displayed normally. If this phenomenon occurs, use the word 
     device.
  <Mitsubishi Electric Corporation FREQROL Inverter>
   - When the link parameter device is read, the communication cycle time 
     becomes an illegal value.
  <Mitsubishi Electric Corporation Q Series CPU Direct Connection>
   - In a screen where a Display Unit does not communicate with a PLC:
     When an access is made to the PLC using the pass-through function 
     after the PLC is restarted, the password lock occurs to the PLC.
     Make connections using the pass-through function after the screen is 
     shifted to the one where the Display Unit communicates with the PLC.
   - Do not write the data including the bit address with the extended recipe 
     function. If such writing is made, a communication error may occur.
  <Mitsubishi Electric Corporation Q/QnA Series Ethernet>
   - The project file created in V4.08 may terminate forcefully,
     when opening it with the GP-Pro EX that uses the communication driver
     V1.15.07 or earlier.
     To avoid this situation, select the [Multiple CPU system] check box
     in the [Individual Device Settings].
  <ODVA DeviceNet Slave>
   - Do not input 32 or more characters for the device address in Address Input 
     of Device Monitor.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Tag information allocated to I/O units may not be imported normally.
     If this phenomenon occurs, edit the data with the Editor manually.
  <Siemens AG>
  <PROFIBUS International>
   - When bit read/write for two or more points is performed to 
     a bit-accessible word device or word type tag, an address other than 
     the specified address may be read/written.
  <SIMATIC S5 3964(R)>
  <SIMATIC S7 3964(R)/RK512>
   - When Gateway Mode on the GP-4G01, occasionally a response error occurs 
     on the HMI.
  <KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct>
   - In Gateway Mode on the GP-4G01, Pass-Through function on HMI
     sometimes fail.
  <Pass-through Function>
   - The pass-through function cannot be used when WinGP and IIS FTP servers are 
     used at the same time.

 2-4 WinGP
  <Function>
   - The buzzer of WinGP does not sound in PS-4700 (Z510).
  <File Manager>
   - When the File Manager displays a folder path and data in that folder is
     updated, the folder path reverts to the default path.
  <Transfer Tool>
   - When using the USB transfer cable (CA3-USBCB-01) to get display unit 
     information, the screen list may not be available. You can add a base screen 
     to make the screen list visible.
  <Offline>
   - When using Window 7 or later as the operating system,
     you cannot remove hardware while offline.
     When detaching a storage device from this product, 
     use the Windows Safely Remove Hardware tool.
  <Script>
   - The _FileCopy parameter of the script, except for Japanese operating
     systems, you cannot use functions set up with Japanese characters
     in the path.
  <Others>
   - After installing Windows operating system and WinGP, then maximizing
     WinGP, the display color of OS may be changed to 256 color.

 2-5 Pro-face Remote HMI Server
   - In Windows 8 / 8.1 / 10, application distribution fails to correctly
     display distributed screens of Excel 2013 on the client.
     To distribute Excel 2013 screens, use desktop distribution.
   - When the Remote HMI Client is configured to connect automatically, 
     the connection dialog box may repeatedly show and hide.
   - When a screen from the screen editor is distributed and operated from 
     a Remote HMI Client, on the rare occasion the Part Settings dialog box 
     would become corrupted.
     Work with the screen editor from the server.
   - Distributing Remote HMI Server itself with application distribution is 
     restricted. When distributing the Remote HMI Server application, consider 
     using desktop distribution.

(3) When Serial No. and License Key Code are not input
   - Project data cannot be transferred to the operation panels
     (except for GP4100 series, IPCs and PC-ATs (Used WinGP)).
   - Transfer using the Transfer Tool is not available for WinGP. However, using
     ProjectCopy, you can copy screen data and get it to work.
     To use ProjectCopy, click [Start]-[All Programs]-[Pro-face]-[WinGP]-
     [ProjectCopy] on the Windows desktop screen.
     However, note that ProjectCopy cannot be used in the following cases:
     - When system data has not been transferred
     - When system data has been changed
       WinGP automatically stops after three hours of continuous operation.
      * It is possible to input the serial No. and the license key code after
        installation of the software. Start the product and go to [Help]-[Enter
        Key Code].

(4) Installation and Uninstallation
 4-1 Installation
   - Be sure to quit all application programs and close (disable) all resident
     programs such as virus detection software before installing the software.
   - Install this software using a user account with Administrator privileges.
   - Refer to our support site "Otasuke Pro!" (https://www.pro-face.com/otasuke/)
     for the operating environment.
   - By inserting a disk into the DVD drive, Setup window will appear.
     If the Setup window does not appear, click the desktop's [Start] button
     and then click [Run]. In the text input field, enter [D:\ProEX_Setup.exe]
     and click [OK].
     (As for the "D:\" part, enter your DVD drive name.)
       * Some of the tools require a license.
       In cases below, USB transfer cables may not be recognized correctly:
       - When you installed the software with a USB transfer cable connected
       - When you started using the software without restarting your computer
   - <How to install ".NET Framework2.0" when not connected to Internet>
     1)Insert the Windows installation media.
       If you do not have the Windows installation media, contact the PC
       manufacturer.
     2)Select "Open command prompt as administrator" on the Explorer.
     3)Execute the following command at the Command Prompt.
       Dism /online /enable-feature /featurename:NetFx3 /All /Source:x:\sources
       \sxs /LimitAccess 
       *) For x:, specify the drive letter of Windows installation media or the
          DVD drive.

 4-2 Uninstallation
   To uninstall the software, click on [Start], then select [All Programs]-
   [Pro-face]-[***], and execute [Uninstall]. ("***" represents the product
   name and version.) Project files and files in your package files will not be
   removed by this operation. Delete other tools from [Start]-[Control Panel]-
   [Add or Remove Programs].

(5) User Registration
   Please register your software to help us offer enhanced customer support.
   Since you can confirm the registered information at anytime once you
   register, you do not have to worry even if you lose it. To register, insert
   a DVD into the DVD drive, select the User Registration menu in the Set Up
   Menu screen and complete the online Software User Registration. You can also
   register after installation by starting the product and registering from
   [Help]-[Online User Registration].

(6) Manuals
   To view PDF manuals, the Adobe Reader software must be installed on your
   computer. Start the product and select [Manual] from the [Help(H)] menu.
   To view only the manuals, select [Start]-[All Programs]-[Pro-face]-[***]
   -[Manual].("***" represents the product name and version.)
   Some manuals need to be downloaded from our support site "Otasuke Pro!".

(7) Fixed Defects
 = V4.09.100 ===================================================================
 7-1 Editor
   <Copy From Other Project>
   - The editor sometimes exited unexpectedly when copying from other projects,
      including the startup screen.
   <Workspace>
   - When using a Windows 8 or later operating system, depending on the zoom
     level, changing the width of windows in the workspace sometimes caused
     unnecessary lines to appear and shift the position of the zoom box.
   <Function>
   - Using many image fonts can slow operations on the screen editor. 
     When that happens, a warning dialog box displays with the "Do not show
     this message again" option.
   - There was an error in the SRAM usage size.
   - When copying/pasting change screen switches between projects, sometimes
     the screen number changed on pasting.
   <Transfer Tool>
   - When using the USB transfer cable (CA3-USBCB-01) to get information
     from the display unit, sometimes you were unable to get the screen list.
   - When the Windows system language was Korean, sometimes project data
     could not be transferred.
   - Converting then transferring a project without editing it sometimes
     caused a system error.
   - Even if the project file being transferred did not exceed the transmission
     size, the overcapacity error would sometimes appear.
   - Automatic transfer would sometimes timeout.
   - Receive would sometimes fail with projects set up with a large amount of
     data on the startup screen.
   - The security note is now displayed when transferring project file to 
     the SP5000 Series Open Box (SP-5B40/SP-5B41).
   <Project Comparison Tool>
   - Comparing the same project sometimes showed a difference
     in the logic screen.
   - When comparing projects with the same external device/PLC settings,
     sometimes the result showed a difference in the external device/PLC
     settings.
   - A warning message now displays when comparing projects with different
     external device/PLC settings.
   - Comparing the same D-script sometimes showed them to be different.
   <Text Table>
   - The font that needed to be installed for a multilingual application
     was unclear.
   <Data Display>
   - Sometimes the set base address changed unexpectedly.
   <Online Monitor>
   - While editing a function block, sometimes an error occurred.
   <Simulation>
   - In Simulation's [Logic] tab, sometimes part of the instructions did not
     display properly.
   <Text Screen>
   - Sometimes undo did not work properly.
   <Extended Script>
   - When registering addresses from the Recipe Data Setup Screen,
     sometimes you were unable to register as integer variables.
   <Project Converter>
   - Converting GP-ProPB3 screen data sometimes caused specific text tables
     to be deleted.
   - Converting GP-ProPB3 screen data sometimes caused errors and conversion
     was not possible.
   - Sometimes invalid data was generated for item names of converted
     sampling settings.
   - Sometimes tag names in trend graph channel settings did not convert
     properly.
   <IO Driver>
   - On the I/O screen, variables mapped to standard inputs sometimes did not
     display.
   <D-script>
   - Right-clicking script then selecting [Cut] from the shortcut menu sometimes
     caused GP-Pro EX to close unexpectedly.
   <Screen Editor>
   - Double-clicking sometimes did not open the Base screen.
   - There were errors in calculating the screen data size on IPC models.
   <Operation Log>
   - Setting SD card as the operation log's save destination sometimes caused
     an error.
   <Graph>
   - In the Data Block Display Graph settings screen, sometimes characters would
     be cut off.
   <Printing>
   - When printing screen information, sometimes the page break shifted
     its position.
   <Font>
   - When using image fonts and the text is set to smooth edges, font images may
     appear different between Windows 7 and Windows 10.
     To make the font images match, from the [Font Settings] select
     the [Use ClearType] check box.
   <Others>
   - In the WinGP settings, the initial destination folder for historical data
     was unintentionally set to "Folder".
   - As the Pro-face Device Configuration service has ended, the feature
     to create a project from a configuration file has been removed.

7-2 Display Unit
   <Load Screen>
   - When the x-coordinate of a loaded screen is 1000 or greater, the loaded
     screen did not display in the specified coordinate.
   - When using SP5000 Series SP-5B00, SP-5B10, or SP-5B90, 
     sometimes could not display images stored on external storage.
   <WinGP>
   - Repeatedly changing the Window screen sometimes caused memory usage
     to continually climb.
   - When a PC that is running WinGP enters sleep mode, sometimes WinGP would
     stop running.
   - When using the start function to run other applications, sometimes
     the application did not start.
   - When using the start function to run other applications, sometimes that
     application could not display in the forefront.
   <GP-Viewer EX>
   - Sometimes could not get historical data from a Historical Trend Graph.
   <Transfer CSV Data>
   - A recipe group name 33 characters or longer in the Transfer CSV Data
     function would sometimes cause the display unit to freeze unexpectedly.
   <Ethernet Multilink>
   - When operating the display as a slave unit, sometimes it could not start
     up properly.
   <LED>
   - The error LED on the GP-4G01 sometimes did not recover from flashing red.
   <Extended Recipe>
   - Copying recipes failed sometimes.
   - The Enhanced Recipe Data List part sometimes did not display
     the recipe data.
   <Offline>
   - SRAM free space sometimes did not display properly.
   - Sometimes changing EZ LAN Adapter Ethernet settings was not possible.
   - In SiteManager Embedded Settings, the SM-E version sometimes did not
     display properly.
   <Web Server>
   - To increase security, the "Run GP-Viewer EX" button is no longer displayed.
   <Online Monitor>
   - After a forced change, sometimes monitoring did not work properly.
   <Logic>
   - During Run mode, the system variable #L_Command was unable to reset
     the logic program.
   - On the LT4000 series, sometimes the processing of logic programs
     slowed down.
   <Memory Loader>
   - During download, sometimes the SiteManagerEmbedded license settings would
     get overwritten.
   <Play Sound>
   - On the SP5B10, sometimes you could not interrupt audio 
     with a short playback time.
   - On the SP5B10, the sound's LineOut output port did not work.
   - On the SP5B10, playing compressed sound files sometimes did not work
     properly.
   <CANopen Master Unit>
   - Transferring project files created in GP-Pro EX Ver. 4.08.200 to a to
     a SP5000 Series Power Box (model: PFXSP5B10) with a CANopen Master Unit
     (model: PFXZCHEUCAM1) attached, sometimes caused the display unit to
     repeatedly restart so you could not use it anymore.
   <SRAM>
   - Forced transfer mode sometimes did not clear SRAM.
   <Sampling>
   - Printing sampling data sometimes caused the display unit screen to freeze.
   <Error Messages>
   - Some error messages did not display properly on the display unit
     of QVGA size.
   <Screen Capture>
   - Despite successfully capturing the screen to JPEG, sometimes a write error
     would occur.
   <SD Card>
   - On the SP5B10 and GP-4000 series (excluding GP-4100 series, GP-4201TM, and
     GP-4301TM), timestamps for files on the SD card may be abnormal.
   <Functions>
   - Fixed OS vulnerability .
   <Image Unit>
   - When the display unit is restarted after changing the display
     position(VX/VY) in the Video Control Area, video module images of VM Unit
     and RGP Input Unit may not be displayed occasionally.
   <Others>
   - Writing a 16-bit data type to a 8-bit array device sometimes caused
     undefined values to be written.

 7-3 Device/PLC
   <Pass Through Function>
   - Sometimes operation was not normal after toggling the virtual COM driver
     between enable/disable (Device Manager settings).
   <Rockwell Automation, Inc. EtherNet/IP>
   - Importing certain tags/aliases failed sometimes.
   - Import sometimes failed when there was a line break between L5K file tag
     information.
   <KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct>
   - A communication error would sometimes arise in the existing system of
     a GP-4G01 HMI.
   <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When the [PC No.] was 16, sometimes communication was not normal.
   <ODVA EtherNet/IP Explicit Messaging>
   - When using the Implicit Messaging function in 1:n communication 
     with certain equipment, sometimes Input data could not be read properly.
   - In the middle of setting up many [Individual Device/PLC Setting], GP-Pro EX
     would sometimes exit unexpectedly when running [Individual Device/PLC
     Setting].
   <Siemens AG Ethernet Gateway for SIMATIC MPI/PROFIBUS>
   - In a 1:n connection, sometimes unable to recover from a timeout error.
   <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - RAAA101error happened when data type of tag is different at display data
     type in Data Display part.
   - Importing tags would sometimes take longer than expected.
   <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - On rare occasions, communication errors occurred on the SP-5B00, SP-5B10,
     and SP-5B90.
   - Variable names beginning with the letter "T" sometimes caused variable
     import operations to fail.
   - When function comments were set up, sometimes importing variables
     would fail.
   - Data types that mix upper and lower-case characters sometimes caused import
     to fail.
   - When using scope names with upper and lower-case characters, variables
     set up on screens may become "Undefined" due to the Import Variables
     command.
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - In [Symbol] mode, when converting structured variables in the [Addresses
     To Convert] dialog box, the addresses for the structured variables after
     conversion were the same.
   <Siemens AG TIA Portal Ethernet>
   - Memory usage has been greatly reduced by filtering and importing
     only required tag information.
   - You can now import TIA Portal projects that include groups.
   - When importing V1.13.02 or later projects with a [Timer] data type, if 
     the selected PLC does not support that data type, the import operation
     is interrupted.
   - Instead of skipping when importing tags that already exist, the operation
     now overwrites tags.
   - The Function Block (FB) is now supported as a data type.
   - By supporting TIA Portal V15.1, some projects could not be imported.
   - When a function block (FB) was set up in another function block (FB),
     GP-Pro EX would sometimes exit unexpectedly.
   <Mitsubishi Electric Corporation iQ-R/F Ethernet(SLMP Client)>
   - The filter function when importing labels did not work.
   <Digital Electronics Corporation - Generic Ethernet>
   - When a connection open error occurred, sometimes the error status did not
     show in the control area.
   - When a TCP connection was opened using the first control area and
     a UDP port was opened using the second control area, a protocol stack error
     might occurred.

 = V4.08.200 ===================================================================
 7-1 Editor
   <Startup Screen Settings>
   - On the SP5B10 series, sometimes the progress bar did not display properly.
   <External Device Settings>
   - After setting up the CoDeSys Automation Alliance CoDeSys V3 Ethernet 
     driver, deleting it sometimes caused GP-Pro EX to end unexpectedly.
   - When using the Ethernet Gateway for SIMATIC MPI/PROFIBUS external device, 
     sometimes text strings were truncated.
   <Function>
   - You can now set up an error message to display when accessing the SD card 
     or USB storage fails.
   - Vulnerabilities have been addressed to prevent unauthorized code from 
     running as a result of spoofing.
   - Using many image fonts can affect operations on the screen editor.
     When that happens, a warning message now displays.
   <Project Converter>
   - Editing converted sampling settings sometimes caused GP-Pro EX to end 
     unexpectedly.
   <Project Comparison Tool>
   - Instead of displaying "WinGP Setting", the comparison result displayed 
     "IPC Setting".
   - When you run comparison on a project where changes were made to 
     the settings from the display unit's offline menu, the result showed some 
     items as different even if it did not change.
   <Transfer Tool>
   - Instead of displaying "WinGP Setting", the comparison result displayed 
     "IPC Setting".

 7-2 Display Unit
   <COM Port>
   - On the SP5B10, even if there was an issue with the first byte in the 
     received data, sometimes no error was detected and thus no error 
     processing occurred.
   <Play Sound>
   - Could not stop playing sound files on the SP5B10.
   <SD Card>
   - The SP5B10 and GP-4000 Series (excluding GP-4100 Series, GP-4201TM, 
     and GP-4301TM) could not recognize a SD card that was filled with data 
     and had no more available space.
   <Data Display>
   - When the Data Display was drawn on the front layer, sometimes the part 
     shape did not display.
   <Pro-face Remote HMI>
   - Repeated connections in asynchronous mode sometimes caused a system error.
   - When changing from asynchronous mode to synchronous mode, sometimes a 
     popup keyboard appeared in the center of the screen.
   <Filing>
   - On the GP-4114T, GP-4115T, and GP-4116T, repeatedly running PLC->SRAM 
     transfer sometimes produced a transfer error.
   <File Manager>
   - The File Manager sometimes did not close when changing the screen on 
     an asynchronous connected Remote HMI.
   <Operation Log>
   - While connected to Remote HMI, working with function switches on the 
     display unit sometimes got recorded as Remote HMI operations.
   <Alarm>
   - If an alarm is triggered right after starting WinGP, sometimes the 
     Trigger Time is 00/00/00 00:00:00.
   <Offline>
   - Even if a USB device was connected, sometimes nothing displayed on the 
     USB screen of peripheral settings.
   <Memory Loader>
   - Downloading sometimes erased the SiteManager settings.
   <WinGP>
   - While [Start Application] was running, shutting down the power sometimes 
     caused WinGP operations to slow the next time it was run.
   - While the Write Filter was enabled, updating the Text Table from offline 
     sometimes caused a system error.
   - Continuously scanning bar codes sometimes caused WinGP to show an error 
     and stop running.
   <Sampling>
   - With the Global Trigger Action setting enabled, enabling and then 
     disabling FTP Transfer in the Save as CSV settings sometimes caused 
     the display unit to stop unexpectedly.
   <EZ Fingerprint Authentication Unit>
   - On closing the fingerprint data registration screen, on the rare occasion 
     the screen stopped working.
   <Others>
   - Even when the backlight on the GP-4104 was red, the screen display OFF 
     operation was still working.

 7-3 Device/PLC
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Using the  "Utility"-"Copy from Another Project" function, or copying 
     and pasting parts between projects sometimes caused changes to variable 
     names associated with parts on the screen.
   - Sometimes could not set up specific tags in parts on the screen.
   - Even though a data type was listed as supported in the Device/PLC 
     Connection Manual importing the corresponding Data Type failed sometimes.
   - When importing array data types, sometimes the array data type was 
     imported as a simple array.
   <GE Intelligent Platforms Series 90-30/70 SNP>
   - Sometimes communication errors were erroneously detected.
   <Rockwell Automation, Inc. EtherNet/IP>
   - When using the Edit button in the Native Series to reimport a L5K file 
     for Control/Compact/Flex Logix Series, sometimes symbol names used by 
     parts on the screen would either change or become undefined.
   <Yaskawa Information Systems Co., Ltd MMCloud TCP Client>
   - In GP-Pro EX, if the data transmission volume was large and the data 
     transmission interval was shortened by the sampling settings and global 
     trigger settings, communication could not be restored after the first data 
     transmission.
   - When sending 65536 or more bytes of data the communication is divided 
     into two or more separate transmissions; however, data after the second 
     transmission failed.
   <ODVA EtherNet/IP Explicit Messaging>
   - Going offline on the display unit while running Implicit Messaging 
     communication sometimes caused the sending of invalid commands.
   <Siemens AG TIA Portal Ethernet>
   - In the Individual Device Settings dialog box, using [Edit] to import tags 
     sometimes caused variables used by parts on the screen to become 
     "Undefined".
   <Pass Through Function>
   - The virtual COM driver sometimes failed to install.

 7-4 Pro-face Remote HMI Server
   <Screen Distribution>
   - Distributing screens with Remote HMI Server sometimes caused the server 
     screen to become blank (white).
 
 = V4.08.101 ===================================================================
 7-1 Installation
   - Resolved a false positive by some antivirus software.

 = V4.08.100 ===================================================================
 7-1 Editor
   <Screen Editor>
   - On the SP5B40 and SP5B41, you could set up the clock update setting even 
     though it would not work.
   - When the screen editor language and font set did not match, using 
     Cut and Paste to paste parts sometimes did not work.
   - The menu from Screen tab's shortcut menu had a spelling error.
   
 7-2 Display Unit
   <Storage>
   - Now displays an error message when access to 
     the SD card or USB storage has failed.
   <Logic Program>
   - On the LT3000, if power is turned off in the middle of executing 
     the PLS instruction, after restarting sometimes the program failed 
     at the PLSY instruction.
   <COM Port>
   - On the SP5B10, simultaneously using both Remote HMI and RS485 
     communication caused a communication error.
   - When using XON/XOFF flow control, if received data 
     included a XON/XOFF value but had a framing or parity error, 
     the error was ignored and flow control was performed.
   <Alarms>
   - On the GP-4000 Series (excluding GP4000M and GP410* Series), 
     the SRAM alarm data was corrupted and caused a system error rarely.
   - Searching the alarm history sometimes failed on alarm displays.
   <Sampling>
   - On the rare occasion, sampling outputs to CSV output the wrong content.
   <Front End Processor>
   - On converting Kanji characters with the FEP keyboard, 
     the FEP display bar sometimes moved to the top of the screen unexpectedly.
   <LED>
   - On the GP4G01, after the error LED turned red or blinked, 
     the LED did not turn off after going offline or after a transfer operation.
   <GP-Viewer EX>
   - The IP addresses in the [Recent files] list sometimes differed 
     with the server (display unit).
   <USB Port>
   - When a SD card was write-protected and connected to the display unit 
     with a USB-SD card reader, sometimes the display unit could not access 
     the SD card.
   <Offline>
   - On the SP5B10, GP4000 Series (excluding GP4000M and GP410* Series) 
     and LT4000 Series, even if there was an issue, running the Check LAN 
     from the Offline screen's Maintenance Menu did not report an error rarely.
   <Transfer Screen>
   - After changing the project configuration to the SP5000 Series Open Box, 
     sometimes transfer was not possible.
     
 7-3 Device/PLC
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - In [Symbol] mode, importing a TPY file from the edit function sometimes 
     overwrote names of symbols that already existed in the project.
   - Importing data types listed as supported in the Device/PLC Manual 
     failed sometimes.
   <Mitsubishi Electric Q Series CPU Direct>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
   <ODVA Ethernet/IP Explicit Messaging>
   - When using Implicit Messaging with a specified device, 
     the display unit would sometimes stop unexpectedly.
   - When using Implicit Messaging with a specified device, 
     on stopping communication sometimes a socket error would display.
   <Rockwell Automation, Inc. EtherNet/IP>
   - When connected to a ControlLogix 5580 controller, 
     sometimes a lamp on the screen would not light up.
   <Keyence KV-700/1000/3000/5000 CPU Direct>
   - The Passthrough function sometimes did not work on the GP-4G01.
   <Mitsubishi Electric QnA Series CPU Direct>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
   <Omron C/CV Series>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
     
 7-4 Pro-face Remote HMI Server
   <Security>
   - Enhanced the encryption of passwords included in exported file.
 
 = V4.08.000 ===================================================================
 7-1 Editor
  <Editor>
   - When run on the display unit, sometimes the blink speed of placed images
     or registered images did not match the editor settings.
   - Sometimes saving the project failed when multiple I/O driver instructions
     were placed in a function block.
   - HMI system variables associated with the device/PLC did not display
     in the address settings window and cross reference.
   - When an error occurred in the enhanced recipe or sampling group editor,
     and after deleting settings clicking the error caused the editor
     to end unexpectedly.
   - In the sampling group's Display/Save in CSV tab,
     the layout has been improved.
   - In a special switch, even though on launcher start up you enable getting
     the operation log, sometimes the setting was not saved.
   - Regardless of the name set up for a global trigger, sometimes
     it displayed as "undefined".
   - When you used parts with the touch warning sound enabled for interlocked
     parts, the screen information sometimes showed 0 for the number of parts
     you can place on the screen.
  <Sampling>
   - Sometimes the sampling settings were deleted when using
     the Save As command to save the project or using the Version Reverter
     to save as a previous version.
  <Project Comparison Tool>
   - Comparing projects with image parts without an actual image set up
     sometimes caused errors in the comparison result.
   - When using the Project Comparison Tool to compare two different projects
     with the same part but in different coordinates, sometimes the comparison
     showed it as not compared.
   - In the graph's alarm settings, if an address is set up in the alarm
     operation field, the comparison could get interrupted.
   - When a project included multiple parts with the same shape,
     the comparison result was "different" even if you compared
     the same project.

 7-2 Display Unit
  <EZ LAN Adapter>
   - Sometimes a socket error occurred during communication.
  <Enhanced Recipe>
   - Display unit was unable to import CSV data that
     included recipe ID 32768 or higher.
  <Graph>
   - When XY Historical Trend Graphs or XY Data Block Graphs were placed
     on screens B9000 or higher, images that overlapped with the graph
     did not appear.
  <Print>
   - While not connected to the GP Remote Printer Server and
     a print job was canceled, the print job occurred after the server
     reconnected to the LAN.
  <FTP>
   - Connecting in PASV mode from an FTP client to the SP5000 Series
     Power Box (SP-5B10) failed on the rare occasion.
  <System variables>
   - When multiple PLC are connected, there were times when the system variable
     was not updated with the correct time even though the clock update setting
     was valid.
  <Operation log>
   - The operation log did not show the message "SlctList On -" when
     you used the Selector list's alarm history switch to acknowledge all,
     clear all, clear all restored alarms, or clear all acknowledged alarms.
   - The operation log recorded starting the SD as "CF Start".
  <USB Device>
   - In GP4000 series (except for GP-410* series) and LT4000 series,
     when a USB device is inserted/removed, the screen would freeze.
  <Pro-face Remote HMI>
   - When used with WinGP or the SP5000 Series Open Box, screen updates
     on the client screen could take up to 10 seconds.

 7-3 Device/PLC
  <CANopen>
   - Improved startup time from the second time after transfer of project data.

 = V4.07.300 ===================================================================
 7-1 Editor
  <Editor>
   - In the switch's Set Bit group feature, the label "Number" has changed to
     "Group".
  <Project Converter>
   - When converting GP-Pro PBIII project data, regardless of whether or not
     there were screen drawings, the logged showed the message
     "1/2 kanji fonts are not converted".
   - If there were invalid characters in the Convert From or Convert To fields
     in the Project Converter, and you clicked [Browse],
     sometimes the Select File dialog box did not display.

 7-2 Display Unit
  <Enhanced recipe>
   - In the Transmission settings, if you set a variable with less than 32 words
     as the destination address, any transferred recipe data could become zero.
  <Ethernet>
   - On the GP4000 series (excluding GP4000M series, GP410* series)
     and LT4000 series, the Ethernet communication is slow.
  <EZ LAN Adapter>
   - When EZ LAN Adapter was attached/detached,
     the display unit rebooted rarely.
   -  Even if Default Gateway was specified, it was not set.
  <System Variables>
   - If you touched the screen while the operation lock was enabled,
     and you continued to touch the screen when the operation lock was released, 
     on releasing the touch the value of LS9234 bit 00 was 0 (lock is on) and
     would not return to 1 (lock is off).
  <EZ Tower Light>
   - If you connect the EZ Tower Light to a computer
     with GP-Viewer EX installed, sometimes exiting GP-Viewer EX caused
     the EZ Tower Light to flash red.
  <Offline>
   - In the Offline screen's Maintenance menu, even though there was
     nothing wrong with the display unit, sometimes the Check Display Pattern
     did not draw the pattern to the right and bottom margins of the screen.
  <Brightness>
   - When the brightness setting on the SP-5000 Series Power Box (SP-5B10)
     was [Auto], turning off the display unit did not retain
     the brightness setting.
  <Brightness adjustment bar>
   - When adjusting the brightness setting with the brightness adjustment bar,
     sometimes the incorrect sounds were emitted on touch.
  <Memory Loader>
   - Sometimes the display of the numerical value for free space
     in storage shifted downward.
   - The Memory Loader displayed a typo for the following models: 
     SP5B10, GP-4114T, GP-4115T, and GP-4116T.
  <Pro-face Remote HMI>
   - Screen of client did not display correctly,
     when the display of GP-4G01 unit's [Orientation] was [Landscape].

 7-3 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - Reading display unit information from the Transfer Tool sometimes failed. 
  <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - Importing variable comments sometimes failed.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Sometimes the wrong value was read from BOOL type variables.

 = V4.07.200 ===================================================================
 7-1 Editor
  <Editor>
   - When changing the model for a LT series project, 
     if the I/O driver's L system variable was used in a part, 
     sometimes the system variable's argument did not get updated.
   - Even though the operating language was Japanese, sometimes part of 
     the sampling settings and global trigger settings displayed in English.
  <Project Comparison Tool>
   - If you ran the Project Converter on a project set up with a Text Table, 
     sometimes the resulting project could not be compared.
   - If you compare projects where symbol variables were added in
     a different order, sometimes the comparison will show differences
     in the symbol variable settings.
   - Comparing function switches sometimes resulted in the message, 
     "Comparison item not found".
  <Project Converter>
   - When converting a GP-ProPBIII project of a portrait view model, 
     sometimes the placement of image objects would get re-arranged.

 7-2 Display Unit
  <Alarm>
   - If the GP is shutdown while an alarm is triggered, on the rare occasion
     the alarm time stamp showed "00/00/00".
   - If the GP is shutdown while an alarm is triggered, 
     and a new alarm is triggered after restarting, on the rare occasion
     the GP stopped working.
  <Security>
   - On the GP3000 series (excluding the GP-3200 series),
     using security settings sometimes slowed the scanning of parts.
  <Enhanced Recipes>
   - If you were unable to save Enhanced recipe elements, it occasionally
     resulted in not being able to run the Enhanced recipe process.
   - If you used Enhanced recipes on a project whose size approached 100%,
     by adding enhanced recipe data on the unit you could save beyond
     the maximum project size. 
     If you transfer it back to the editor and open the project,
     you may not be able to transfer it again due to a transfer size error.
  <Text Table>
   - On the GP4000M series, sometimes the loading of the text
     table file (USB memory) on start up did not work.
  <Memory Loader>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP-4100 series), sometimes you could not use
     a SD card on the Memory Loader tool.
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10)
     or SP5000WA series, sometimes the initial screen displayed without
     recognizing USB storage even though the initial screen was set up
     to display only after recognizing USB storage.
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update stopped.
  <GP-Viewer EX>
   - Connecting GP-Viewer EX to WinGP and operating an Historical Trend Graph
     caused the display of an error dialog box.
  <GP-4G01 Gateway Mode>
   - When communicating at high speed (115.2 kbps) with a PLC
     with good communication performance, occasionally a communication error
     occurred on the HOST side.

 7-3 Device/PLC
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - On the LT4000 series, GP-4402 WW, GP-4502WW, GP-4114T, GP-4115T, GP-4116T, 
     and SP5B10, sometimes after transferring an error displayed and
     the unit did not start up.
  <Siemens SIMATIC S5 3964(R)>
   - Note the following fixed defects when Gateway Mode on the GP-4G01: 
     - If the GP-4G01 has never run communication at all and the HMI starts
       communication, a response error occurred once on the HMI.
       After a re-transmission, the error is restored.
     - If you enter the GP-4G01 offline screen then change back to the online
       screen, a response error occurred on the HMI.

 = V4.07.101 ===================================================================
 7-1 Display Unit
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update stopped.

 = V4.07.100 ===================================================================
 7-1 Editor
  <Screen Editor>
   - If you use Call Screen to load a screen with text that used the Image font
     type with Anti-alias enabled, sometimes the text defined in the screen
     editor did not appear.
  <Simulation>
   - Improved the issue that logic tab in simulation not displaying.
  <Project Comparison Tool>
  <Version Reverter>
   - Entering invalid characters in the Project Comparison Tool's Source/Target
     for comparison fields, or the Version Reverter's Convert From File
     or Convert To File fields, sometimes caused the tool to exit unexpectedly.

 7-2 Display Unit
  <Online Monitor>
   - If you set the Retry Count to 9 or more in the Monitor settings,
     sometimes the connection failed and an error occurred.
  <Screen Transfer>
   - Failing to transfer a project with device/PLC registers mapped
     to the System Data Area sometimes caused an invalid value to get written
     to the system area start address.
  <EZ Fingerprint Recognition Unit>
   - Sometimes GP4000 Series units could not register fingerprints
     on EZ Fingerprint Recognition Units sold from 2016 onward.
  <WinGP>
   - Added preventative measures against spoofed arbitrary code that may be executed.
  <GP4000 Series>
   - On the GP-4201TW, the USB port (Type A) could not be recognized.
  <Communication>
   - The models as follows would get hung with COM port communicating. 
     - LT4000 series
     - GC4000 series
     - GP4*02WW series
     - GP411*T series
     - GP4*01TM series
 7-3 Device/PLC
  <Communication Driver>
   - When converting the project of GP-Pro PBIII which set the following 
     communication driver, it could not be transmitted to the HMI.
     - Fanuc LTD. Power Mate Series
     - Fuji Electric Co.,Ltd. MICREX-SX Series SIO
     - Hitachi, Ltd.S10 Series SIO
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
     - KEYENCE Corporation S10 Series SIO
     - Mitsubishi Electric Corporation A Series CPU Direct
     - Mitsubishi Electric Corporation A Series Computer Link
     - Mitsubishi Electric Corporation FX Series Computer Link
     - Mitsubishi Electric Corporation FX Series CPU Direct
     - Mitsubishi Electric CorporationQ Series CPU Direct
     - Mitsubishi Electric Corporation Q/QnA Serial Communication
     - Mitsubishi Electric Corporation QnA Series CPU Direct
     - OMRON Corporation C/CV Series HOST Link
     - OMRON Corporation CS/CJ Series HOST Link
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
     - Siemens AG SIMATIC S5 3964(R)
     - Siemens AG SIMATIC S7 3964(R)/RK512
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200)
     - YASKAWA Electric Corporation MEMOBUS SIO
     - YOKOGAWA Electric Corporation Personal Computer Link SIO

 = V4.07.000 ===================================================================
 7-1 Installation
  <Pro-face Remote HMI Server>
   - If you uninstall Remote HMI Server then re-install without restarting
     your computer, installation could fail.
   - If you ran a software update while Pro-face Remote HMI Server is running, 
     installation could fail.

 7-2 Editor
   <Transfer Tool>
   - When the display unit was set up with a Send/Receive project password and
     on connection you entered the wrong password, when the password screen
     opened again an error message appeared.
   - When checking the Memory Loader backup data or creating a new project, 
     the file selection screen's file pulldown list contracted right away.

 7-3 Display Unit
  <WinGP>
   - WinGP failed to start on computers with the Multilingual User Interface
     (MUI) pack installed.
   - In Forced Transfer mode, on exiting WinGP a dialog box appeared with
     corrupted characters in the title bar.
  <System Variables>
   - If you set an invalid value other than a BCD value for the clock data, 
     the clock did not show the time correctly.
  <Communication Scan>
   - When the device/PLC communication scan was OFF, 
     an error appeared when accessing the PLC.
  <GP4100 Series>
   - When the transmission speed was 115,200 bps, the USB-Serial (RS-232C) 
     conversion cable could not be recognized.
  <Sampling>
   - Sometimes sampled data could not be collected anymore if you detached 
     external storage from the unit while saving sampled data to CSV format.
  <FTP>
   - While an FTP server was not added in the FTP server settings and 
     you captured a screen and tried saving to an FTP server, 
     you could not enter offline mode or transfer mode anymore.
  <Web Server>
   - If you set an invalid value for the Device View's Update Frequency parameter
     from an URL, the device value did not update or an error occurred.
  <Enhanced Recipes>
   - After setting the label's destination address in the screen editor,
     if you change the destination address by using either Change
     Device/PLC or Convert Address, sometimes the recipe label did not display.
  <Pro-Server EX>
   - Entering offline mode while running one of the following processes
     sometimes caused the corresponding operation to not run:
     - [Save] in the Save GP Screen tool
     - [GP JPEG Upload] action
     - Excel form action's [Upload GP screen data]
  <Others>
   - When an online error and system error occur at the same time, 
     sometime touch did not work and the error window's reset button
     would not operate.
   - There was an issue where system errors did not display on
     the GP-4201TM (Modular Type) and GP-4301TM (Modular Type).

 7-4 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - The use of Ethernet 2 port functionality by SP5000 series (SP-5B10)
     could result in communication errors.
  <Siemens AG TIA Portal Ethernet
   - Tag import functionality failed to import data type "Struct".
   - Tag import functionality failed to import tag data from STEP7
     Safety projects.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Cannot launch HMI if project file imported several Tag data in some case.

 = V4.06.300 ===================================================================
 7-1 Editor
  <Simulation>
   - In simulation, when monitoring the logic, the display position of I/O values
     may shift sometimes.
  <Project Comparison Tool>
   - When comparing projects with the [Show only differences] option, 
     double-clicking the difference sometimes displayed the wrong line. 
  <Editor>
   - Addressed the feature in our software that caused some antivirus software 
     to erroneously identify as a virus.

 7-2 Display Unit
  <USB Devices>
   - When using GP4000H (hand-held) Series and you connect to multiple USB hubs
     and USB devices, the display unit sometimes reset on disconnecting an USB device.
  <Enhanced Recipe>
   - Turning ON #H_RecipeControlMapAddress occasionally generated a system error.
  <Alarm>
   - The wrong warning message appeared when drawing an alarm part with banner 
     enabled and a part with animation enabled on the same screen.
  <Operation Log>
   - When using SP5000 or GP4000 Series (except GP-4100 Series), using a read-only
     SD card sometimes slowed the performance of operation logs.
  <Memory Loader>
   - When using SP5000 or GP4000 Series with USB 2.0 USB memory, the Memory Loader
     sometimes failed. 
   - Memory Loader could not start under the following conditions.
     - Display unit's system version was 4.50.000 or later
     - Startup data for the Memory Loader was created on version before 4.50.000.
  <Logic Monitor>
   - When using GP3000 and LT3000 Series units, the wrong value was set to
     #L_FaultLogicScreen and #L_FaultStep.
  <EZ Tower Light>
   - When using SP5000 Series Open Box (SP-5B40) and while WinGP was restarting 
     after a transfer, the EZ Tower Light sometimes buzzed and all the layers
     turned red and flashed.
  <Text Table>
   - When using the Load Text Table feature with codepage 850, sometimes the text
     did not display properly.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - Grouped Data blocks and PLC tags cannot be imported.
  <ODVA EtherNet/IP Explicit Messaging>
   - Transfer error is happened if user configured assembly instance over 256.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Individual Device Settings in Beckoff TwinCAT driver sometimes shows wrong settings.

 = V4.06.200 ===================================================================
 7-1 Editor
  <Simulation>
   - In the Text Table Settings, when the value in the Change Language control
     address is out of range (17 or greater), editing the label in an extended
     recipe could cause simulation to exit unexpectedly.
   - Using unregistered variables in the function block of a logic program
     occasionally caused simulation to exit unexpectedly.
   - Occasionally simulation stopped working when you assigned a fractional
     value to a Float or Real data type variable.

 7-2 Display Unit
  <Project Copy>
   - Occasionally this tool was unable to copy projects associated with
     PS-5000 or PS/PE-4000 models to WinGP.
  <COM Port>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the COM port.
  <USB A Port>
   - An USB device with three or more configuration descriptors becomes unusable
     when connected to the GP4000 Series (except GP-4100 Series, GP-4201-TM,
     and GP-4301TM).
  <USB/SIO Cable>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the USB/SIO(RS232C) and USB/SIO(RS422/485) cables.
  <Bar code input>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not accept input
     from a USB bar code reader properly.
  <Touch Panel>
   - When using the SP5000 Series Power Box (SP-5B10) with the Advanced Display
     (SP-5x00WA), occasionally touch panel operations did not work properly.
  <Filing>
   - On the GP-4100 Series (color model), after using a Special Switch
     to transfer filing data from the device/PLC to SRAM and the display unit
     was turned OFF, occasionally the transferred data was not saved.
  <Sampling>
   - When you setup the System Data Area as a PLC device, and you save sampling
     data in CSV format, occasionally the timestamp for sampling data is shown
     as 00:00:00.
  <Extended Scripts>
   - In rare cases, using drawing functions in extended scripts caused
     the display unit to stop working.
  <Logic program>
   - On the LT4000 Series, after the PLSQ instruction you could not output
     acceleration/deceleration pulses from the PLSY instruction only.
     <Logic program>
   - When you start Monitor Step on the SP5000 Series Power Box (SP-5B10),
     the value in a portion of the bit variables used in function blocks
     could not be refreshed.
  <WinGP>
   - Even when communication is not yet established with a PLC once, now you can
     still back up internal devices.
  <Script>
   - Importing a CSV file with an unsupported line feed code (LF) could cause
     the display unit to stop operating normally.
   - You can now use "LF" as the line feed code in CSV files read in with
     the SD_read_CSV function.
  <Offline>
   - When using the bar code settings or script settings in WinGP,
     even when COM was in use it displayed as [Do not use]. 
     Additionally, on the SP5000 Series Open Box (SP-5B40), even if 
     COM was set up not to be used, COM appeared as if it was set up.
   - In the SP5000 Series Open Box (SP-5B40) Bar Code Settings,
     even though you displayed the Bar Code 2 settings, the 5V Power Supply
     always showed the setting defined in Bar Code 1.
  <Alarms>
   - On the GP4000 series (except for GP-41** series, GP-4201TM,
     and GP-4301TM), sometimes system errors would display
     when an extended alarm message occurred.
  <Others>
   - At run time on the SP500 Series Power Box (SP-5B10), occasionally
     the Display LED flashed between red and green and the display unit
     would not run anymore.
   - After replacing the system card on the SP5000 Series, you occasionally
     were unable to start up the unit.
   - In rare cases, the LT4000 Series stopped working during
     serial communication.

 7-3 Device/PLC
  <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When using multiple CPUs, occasionally invalid values were read.
   - Occasionally normal communication was not possible when using
     Serial Multi Link.
  <YASKAWA Electric Corporation MP Ethernet/MECHATROLINK>
   - When selecting "Stepping(Orientalmotor) AZ Series 
     Multi-Axis Driver(M-III)", the parameter reference function in address 
     input dialog did not work.

 = V4.06.101 ===================================================================
 7-1 Installation
   - The following behavior has been revised by removing corresponding file;
     Some virus check tools show a warning message of virus detection.

 = V4.06.100 ===================================================================
 7-1 Editor
  <Version Reverter>
   - If you converted a V4.0 project to V3.6, you could not open that project
     in the screen editor.
  <Logic>
   - After inserting a label, using the Undo command sometimes caused GP-Pro EX
     to exit unexpectedly.
  <Transfer CSV Data>
   - When using the Japanese operating language, in the Recipe Settings
     (Transfer CSV Data) - CSV Data Transfer Condition, the [Number of Digits]
     field displayed as [Decimal Places].
  <Comparison Tool>
   - When the model was SP5B40+SP5660TP, comparison was not possible with
     projects using different display modules.
  <Transfer Tool>
   - When using automatic transfer to send a project with backed up historical
     alarm data, sometimes SRAM was not cleared and historical data became
     invalid.
   - When sending projects to multiple display units in automatic transfer mode,
     sometimes the transfer tool exited unexpectedly.

 7-2 Display Unit
  <I/O Driver>
   - When the display unit turned OFF, the I/O driver instructions PLSY/PLSQ
     did not output anymore.
   - Analog output was not possible when the analog output's value for the lower
     limit was greater than 0.
  <WinGP>
   - As soon as a display unit started up, touching a Special Switch to enter
     the offline screen sometimes caused the PC-Runtime to display a halt error
     message.
  <Printing>
   - When using certain printers, printer output was duplicated.
  <Offline>
   - Transferring projects from past versions of GP-Pro EX to GP4000 series
     (excluding GP4100 series, GP-4201TM, and GP-4301TM) sometimes caused
     the setup items in the offline screen to not display properly.
  <System Data Area>
   - Depending on the address you used as the system data area's start address,
     the system data area did not operate properly.
  <Transfer CSV Data>
   - Sometimes erroneous values were output when using Transfer CSV Data to
     create your CSV.
  <Logic>
   - In the logic program, setting a value greater than 65536 to a 16-bit
     address sometimes caused a communication error.
  <Pro-face Remote HMI>
   - Even though an Off delay switch was pressed on the client, screen change
     operation was possible on the display unit.
   - Even when a client monopolized touch operations, function switch operations
     on the Hand-held GP was possible.
   - While displaying an analysis list, changing the client to asynchronous
     connection caused a system error.
   - When running asynchronous screen monitoring while WLAN communication was
     unstable, and you used the [Previous Screen] switch, sometimes it
     displayed the wrong screen.
   - Pressing function switches on the hand-held GP did not monopolize touch
     operations and touch operations were possible from the client.
  <Enhanced Recipes>
   - On a screen without a Recipe List part, after receiving enhanced recipe
     data, copying the enhanced recipes actually copied the recipes prior to
     receiving the enhanced recipe data.
  <Screen Transfer>
   - When using the SP5000 Series Power Box (SP-5B10) in forced transfer mode,
     transferring the project file sometimes failed.
  <Others>
   - On the rare occasion, LT4000 series units did not start up.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - When using the Siemens AG TIA Portal Ethernet driver, failed to transfer
     the project to the display unit after re-importing the TIA Portal project
     file.
  <TwinCAT ADS/AMS driver>
   - When using the BeckhOFF driver, sometimes String-Array text could not
     display in the GP's data display part.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Occasionally, the driver's scroll bar did not work properly.
  <IEC Standard IEC 60870-5-101>
   - Occasionally, the IEC driver's element status addresses did not work
     properly with alarm history.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Changing the tag name occasionally caused operations to not work properly.
  <LS Industrial Systems Co., Ltd. GLOFA Series Cnet>
   - When using older link units, occasionally communication errors occurred.

 = V4.05.100 ===================================================================
 7-1 Editor
  <Editor>
   - On the PS-5000 series and PS/PE-4000 series, after selecting COM2
     in the device/PLC settings, sometimes the RS422/485 option
     could not be selected.
  <Sampling>
   - In the Sampling settings, editing the address in the address settings
     sometimes caused the application to exit unexpectedly.
   - In the Print Settings, sometimes the number of characters
     in the Print Preview did not match the actual printout.
  <Print>
   - Printing the I/O settings omitted the I/O name.
  <Data Display>
   - If you select the Sign +/- check box in a Numeric Display,
     and from the Display settings select Image Font,
     sometimes the preview did not display numeric values.
  <Text Table>
   - Editing the contents of the Text Table sometimes changed the position of
     referenced text parts.
  <Function Blocks>
   - After creating a function block with no registered variables,
     displaying [Project Information] or the function block's
     [Change Attributes] dialog box occasionally caused the application
     to end unexpectedly.
  <Project Comparison Tool>
   - Comparing the same project sometimes produced differences.
  <Remote Viewer Settings>
   - Unable to set up FTP or Web Server functions on GP3300 Series,
     models earlier than Rev*-4.
  <Others>
   - After deleting a base screen, from the [Edit] menu selecting [Undo]
     sometimes changed the [Shape] of parts to [No shape].
   - When deleting one of the vertex points on a Polyline, Polygon,
     or Picture Display, sometimes the display position shifted to something
     other than the deleted point.

 7-2 Display Unit
  <WinGP>
   - From the system menu, reset sometimes caused WinGP to end unexpectedly.
   - From the WinGP offline screen, sometimes the task manager would not start.
   - When using a project set up with sound functions,
     sometimes you could not enter offline mode.
  <Offline>
   - On a display unit that does not support MPI,
     from the offline maintenance menu's [COM1/COM2/LAN Check]
     property selecting [COM2/RS422] would sometimes display the dialog box
     for MPI models.
  <Sampling>
   - Saving sampling data to CSV format sometimes caused
     a date of 00/00/00 for sampling records.
  <Transfer Tool>
   - When CF card is selected as the destination in the [Project Information],
     during screen transfer the Transfer Tool sometimes ended unexpectedly.
  <Online Monitor>
   - When monitoring logic online and the connection with
     the display unit fails, sometimes the display unit would cease to run.
  <Data Display>
   - When the Address Type is [Address] or [Device Type Address],
     the popup keypad's display speed has been improved.
  <Memory loader>
   - When using USB memory with the write protection feature enabled
     and you transfer screen data from the memory loader, the IP address
     on the display unit would sometimes change.
  <Error Message>
   - On the GP-4100 series (Color Model), when the backup battery
     is running low on power, the message "RAAA055:Clock data has been
     initialized" would display.
  <Logic>
   - When using a Bit Type system variable as a Function Block operand,
     sometimes the operation would be incorrect.
  <Script>
   - When using the Write File instruction, setup with offset and
     overwrite modes, the write operation took some time to complete.
  <System Variables>
   - On the GP-4100 series (Color Model), even though the project
     has not been transferred, sometimes the #H_TransferChange system variable
     would not turn OFF.
  <Momentary Switch>
   - On WinGP, while touching a momentary switch, touching two or more points
     outside the momentary switch sometimes caused the momentary switch
     to turn OFF.
  <Others>
   - On the GP-4100 series (Color Model), if the USB connection is interrupted
     while transferring the project, or the display unit is powered OFF,
     sometimes touch did not work.

 7-3 Device/PLC
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP5000 series, while communicating with the PLC,
     frequently accessing the SD card on the display unit sometimes caused
     a communication error.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - Sometimes failed to import variables.
   - Sometimes failed to import structured variables.
   - Reading text data sometimes caused WinGP or Open Box to stop running.
  <Panasonic IndustrialDevices SUNX MEWTOCOL7-COM Ethernet>
   - When communicating with an older CPU, 
     sometimes communication errors occurred.

 7-4 Pro-face Remote HMI Server
  <Screen Distribution>
   - On application distribution, if the client is disconnected
     then reconnected, sometimes the client screen would turn white
     and the application screen could not be displayed.

 = V4.05.000 ===================================================================
 7-1 Editor
  <Editor>
   - When using the Premium Display Module with 
     the SP5000 Series Open Box (SP-5B40), sometimes you could not open a
     project received using the Receive Project command.
   - Previously unable to set up a modem on the LT4000 series.
   - There was an error in part of the Cyrillic stroke font.
  <D-Script>
   - Added preventative measures against stack overflows and unauthorized memory
     access caused by spoofing.
  <Transfer Tool>
   - When using AGP3750T or AGP3560T, sometimes the run time was also
     transferred despite the setting defined in the Automatic Transfer property.
   - Added preventative measures against spoofing used to reference data.
  <Project Comparison Tool>
   - Sometimes the tool was unable to complete comparison of Alarm attributes.
   - The process was interrupted when comparing projects with the following
     parts or screens.
     - Remote PC Access Window
     - Alarm
     - Window
     - Graph
     - Sampling Data Display
     - Selector List
     - Text Alarm
     - Historical Trend Graph
     - Show CSV
     - Data Transmission
     - Filing
     - File Manager
     - Function Block screen

 7-2 Display Unit
  <Alarm>
   - Improved polling performance of extended alarms on GP4000 series,
     SP5000 series, and WinGP.
  <Script>
   - On the GP-4100 Series, GP-4201TM and GP-4301TM, communicating over
     RS-485(2-wire), clearing the send or receive buffer with the EXT_SIO_CTRL
     control variable sometimes disabled GP-4000 so it could not receive the next
     data.
  <Startup>
    - On the SP5000 series and WinGP, when Device Monitor was enabled, sometimes
      the display unit had difficulty starting up.
  <Sampling>
   - The Sampling Display part's Refine Search feature was unable to find dates
     in the 2000 to 2009 year range.
  <FTP>
   - On the SP5000 Series Power Box (SP-5B10), previously unable to make a PASV
     Mode connection from an FTP client
  <Pro-Server EX>
  <WinGP API communication>
   - While the display unit is saving SRAM backup data, sometimes an error
     occurred if you saved Pro-Server EX SRAM backup data, if you ran an action
     that accesses SRAM, or if you ran an API that reads the SRAM backup data.

 7-3 Device/PLC
  <GE Intelligent Platforms Series 90-30/70 SNP-X>
   - In the Alarm Summary, setting up a bit device (bit 17 or later) did not
     display correctly.
  <Siemens AG SIMATIC S7 MPI Direct>
   - When used with the SP5000 series, sometimes a communication error occurred.
  <LS Industrial Systems Co., Ltd. XGT/XGB Series FEnet>
   - On reading a bit device, sometimes the wrong value was read.

 = V4.04.100 ===================================================================
 7-1 Editor
  (Editor)
  <Project Information>
   - Project Information did not display input Integer Variables correctly.
   - When the operand of a function block instruction is empty, displaying
     the Project Information caused GP-Pro EX to exit unexpectedly.
  <Transfer tool>
   - Speed of transferring projects over LAN is improved on WinGP, SP5000 series
     (Power Box and Open Box), and GP4000 series (except GP-4100 series,
     GP-4201TM, and GP-4301TM).
  <Project Comparison Tool>
   - The Comparison Tool stopped working when comparing a project set up
     with comments in the Movie Player.

 7-2 Display Unit
  (Runtime)
  <Barcode Reader>
   - When scanning repeatedly over a short period of time, the barcode reader
     dropped bits of data.
  <WinGP>
   - When SRAM usage exceeded 512 KB, internal device backup did not run.
  <Extended Script>
   - When using drawing functions in extended scripts, on very rare occasions
     the Display locked up.
  <FTP>
   - FTP clients could not connect to the SP5B40 unit's LAN2 port.
  <USB A Port Communication>
   - When a GP4000 series unit (except for GP-4100 series, GP-4201TM, and
     GP-4301TM) communicated at high speeds with a USB device connected
     to the USB A port, sometimes access to the USB device became unavailable.

  7-3 Device/PLC
  <Siemens AG SIMATIC S7 Ethernet>
  <Siemens AG SIMATIC S7 MPI Direct>
   - Starting Simulation slowed when using a large number of tags.
  <Schneider Electric SA MODBUS SLAVE>
   - On a newly created project where Ethernet is selected, running bit
     operations on retentive registers cleared bits in unrelated registers.

  7-4   Pro-face Remote HMI Server
  <Screen Distribution>
   - Using desktop delivery, you can now input from the software keyboard
     on the server.

 = V4.04.000 ===================================================================
 7-1 Editor
  (Editor)
  <Transfer tool>
   - Transfer Tool did not display the I/O driver name in the Transfer File
     Information.
   - The Transfer Tool's [CF/SD card connection], sometimes folder copy would
     end abruptly.
  <font>
   - There was an error in part of the Cyrillic stroke font.

 7-2 Display Unit
  (Runtime)
  <Data Display>
  <WinGP>
   - Enabling Windows touch on Windows 7 or later slowed the reaction time of
     momentary switches.
  <Enhanced Recipe>
   - In Enhanced Recipe mapped addresses, sometimes the corresponding element
     values were invalid.
   - The Enhanced Recipe's #H_RecipeResultTransfer variable did not correctly
     reflect an error.
   - System error sometimes occurred when importing a CSV file as an Enhanced
     Recipe.
  <Pro-face Remote HMI>
   - When a client in asynchronous mode and a client in synchronous mode are
     connected at the same time, and you set an invalid table number 
     in the Text Table's [Switching Control Address], changing the screen
     on the asynchronous client caused the screen on the server to change.
   - When monopolize touch was set to 0 seconds, and the client was
     disconnected while touching the screen, touch did not turn OFF.
   - Frequent screen changes from a client in asynchronous mode sometimes
     caused the screen on the server to change.
   - Even though the time elapsed for monopolize touch, sometimes
     this feature would not release touch.
   - While a client is running monopolize touch and a switch is continually
     touched on the server, even though the switch is still touched and should
     not activate anything, the switch actions run as soon as monopolize touch
     is released by the client.
   - Connecting Remote HMI for extended periods sometimes caused WinGP to crash.
   - When multiple clients connected in synchronous mode, unable to monopolize
     touch between clients.
  <Animation>
   - Color animation for image file sometimes did not work.
  <Script>
   - On the GP-4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM),
     communicating over RS-422/485 2-wire, clearing the send or receive buffer
     with the EXT_SIO_CTRL control variable sometimes disabled GP-4000 
     so it could not receive the next data.
  <Others>
   - On SP5B10, mapping the top address of the LS area to a device/PLC address
     with a bit length of 32 bits sometimes caused the internal device backup
     data to be 0xFFFF.
   - On the GP-4201TM or GP-4301TM, sometimes the screen did not recover
     from standby mode.
   - SP5B10, on the rare occasion , displayed error [RGAA001: Watchdog error].

 7-3 Device/PLC
  <Azbil Corporation Controller (CPL)>
   - Accessing Network Addresses (00000001-0000FFFFh) in DMC50 sometimes
     caused a communication error.
  <ODVA EtherNet/IP Explicit Messaging>
   - When using implicit messaging and the TCP/IP connection was terminated
     from an external device, sometimes communication could not be restored.
  <CC-Link Partner Association CC-Link Intelligent Device>
   - When using "Cyclic Transmission"and "Transient Transmission" on the screen
     at the same time, only when "Cyclic Transmission" completed could the GP
     display data values.

 = V4.03.400 ===================================================================
 7-1 Editor
  (Editor)
  <Alarm>
   - In the Editor, there was the case that a part of the Address settings get
     initialized when copying and pasting (Assign Addresses) the Read Data From
     Each Alarm settings in Block tab of Alarm settings.
  <Trigger Action>
   - There was the case that an error below displayed in error check
     when opening the project file which set the screen changing
     by using trigger action.
     [1501: Base screen Illegal address. Define a correct address.]
  <Project Converter>
   - When converting the GP-PRO/PBIII project file which includes
     the tab character in variables, the project was not able to open
     in editor.
  <Error Check>
   - There was the case that project file using SP5B40 showed a warning of
     SRAM capacity displayed during Error Check when usage capacity of SRAM
     exceeded 320 KB.
  <Startup>
   - There was the case GP-Pro EX will not run in the environment that not
     have time zone information in windows registry.
  <Version Reverter>
   - There was the case that the project used GP4301TM was not changed
     correctly from V. 4.0 to V. 3.6 or earlier by Version Reverter.
  <Project Comparison Tool>
   - When comparing the project which changed the coordinates of text
     object, a message displayed telling "Comparison item not found".

 7-2 Display Unit
  (Runtime)
  <Data Display>
   - When pop-up keypad was displayed to right edge of the SP5B10 screen, there
     was the case that it was not displayed normally.
  <Online monitor>
   - When setting the indirect devices as Device/PLC, there was the case that
     online monitor not able to connect to the display.

 7-3 Device/PLC
  <Digital Electronics Corporation General Ethernet>
   - Protocol stack error could remain indicated in passive connection opening.
  <YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet>
   - When driver version is V1.19.05, Device Data Copy Tool does not operate 
     normally in WinGP.
  <YASKAWA Electric Corporation High Speed Ethernet Server>
   - Repetitive file reading with File Read class (0x4C0) into memory could 
     cause display to stop communication.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - An abnormal application termination could occur with WinGP if "Node Name 
     (or) Address" setting was empty.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Array data in a structure in Symbol mode could not always be displayed 
     properly on screen.
   - An abnormal application termination could occur when importing a TPY file 
     in which data type information for arrays is improperly exported by TwinCAT.
  <YOKOGAWA Electric Corporation Personal Computer Link Ethernet>
   - When "Binary" is selected as "Data Code Settings", reading error history 
     with ERH device couldn't set the last byte.
  <Siemens AG SIMATIC S5 CPU Direct>
   - Some DB device settings in PLC could cause communication error with 
     versions 1.13.02 or later.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - When use multiple Tag Data with multiple node setting. The tag data may not 
     deleted normally.

 = V4.03.300 ===================================================================
 7-1 Display Unit
  (Runtime)
  <WinGP>
   - When using Start Application function, there was the case that WinGP
     operation gets slow.
  <Text Table>
   - When using Load Text Table, there was the case that certain characters
     were not displayed correctly.
  <Remote HMI>
   - Although the initial value of disconnect time after communication
     (#H_RemoteHMI_DisconnectMode) passed, there was the case that display does
     not detect it.
  <Ethernet >
   - When GP 4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM)
     received mass of multicast packets, there was the case that display
     operation gets slow.
  <LED>
   - There was the case that SP5B10 stop operating with display's LED blinking
     red and green under the conditions below.
     - When connected with USB mini-B cable (for both Box and Display).
     - When linked up/down with Ethernet Interface (Ethernet 1).
     - When connected with USB-to-serial conversion cable (CA6-USB232-01).

 = V4.03.200 ===================================================================
 7-1 Editor
  (Editor)
  <Display>
   - In the Editor, there were instances when the [Series] field listed unknown
     display types.
  <Transfer tool>
   - Using [CF/SD card connection], you could not copy multiple folders in the
     CF/SD card.

 7-2 Display Unit
  (Runtime)
  <WinGP>
   - On starting the SP5000 series (open box), sometimes all levels on the EZ
     Tower Light flashed red and emitted the buzzer.
   - On the rare occasion, repeated touches caused WinGP operation to freeze.
   - Changing to offline menu may not work.

 = V4.03.100 ===================================================================
 7-1 Editor
  (Editor)
  <Enhanced Recipe>
   - If you registered addresses in the Enhanced Recipe Group, these addresses 
     appear as used in the address setting workspace even after the enhanced 
     recipe group is deleted. Clicking the reference link for one of these deleted
     addresses caused GP-Pro EX to exit unexpectedly.
   - On importing CSV files as recipe data, elements that exceeded the upper 
     limit were imported as invalid data.
  <Project Comparison Tool>
   - Comparing the same project set up with headers or footers on base screens 
     caused the comparison result to be [Different].
  <Display>
   - Convert Resolution did not convert labels on parts properly.
  <Graph>
   - When [Alarm Action] was [Address], [Display Direction] was [Right], [Left]
     or [Bottom], and the shape was not the default, icons for upper and lower 
     limits defined in the [Alarm Settings] did not display properly on the 
     display unit.
  <Function>
   - If you use any application other than GP-Pro EX to create alarm messages, 
     then copy and paste these messages into GP-Pro EX alarms, modifying the 
     message could cause GP-Pro EX to exit unexpectedly.
  <Device/PLC>
   - On selecting [PROFIBUS international], GP-Pro EX occasionally exited 
     unexpectedly.

 7-2 Display Unit
  (Runtime) 
  <Offline>
   - On very rare occasions, changing to offline mode distorted the screen froze
     operations.
  <File Manager>
   - On the SP5000 series Power Box (SP-5B10), viewing a file on a SD card or
     USB storage in the File Manager displayed an invalid value for the file's
     timestamp.
  <Sampling>
   - On the SP5000 series Power Box (SP-5B10), GP4000 series (except GP-4100
     series), and the LT 4000 series, performance for saving sampling data to 
     CSV was poor.
  <WinGP>
   - Continuously using the EZ Tower Light caused WinGP operations to cease.
  <Screen Transfer>
   - Transferring a project to WinGP failed when WinGP was installed on any 
     drive except C drive and the C drive's write filter was enabled.
   - Changing the display unit to offline or transfer mode while running 
     Pro-Server EX's data transfer feature caused the display unit to freeze.
  <Others>
   - On the GP-4000 series (except GP-4100 series, GP-4201TM, and GP-4301TM), if
     you turned OFF the display unit just as the display unit was powering up 
     and about to show the initial screen, on very rare occasions project data 
     on the display unit was erased, requiring you to transfer the project again.
  <Pro-face Remote HMI>
   - Previously, connection passwords could use language dependent symbols.
  <SD card>
   - On very rare occasions, writing to the SD card failed on GP-4000 series
     (except GP-4100 series, GP-4201TM, and GP-4301TM).
  <Call Screen>
   - Nesting base screens and keyboard screens 10 levels or more could cause
     shifting of the display position of parts.
  <Enhanced Recipe>
   - On the SP5000 series Power Box (SP-5B10), performance for editing label 
     names in enhanced recipes was poor.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - While the application was being distributed, restarting the Remote HMI 
   Server prevented the client from connecting to the application screen.
  <Distribution Settings>
   - Even though clients could connect using fixed paths only, the 
     [Distribution Settings] screen's [Application] field accepted relative 
     paths.

 = V4.03.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When editing a project with limited free disk space, the project failed to 
     save. Then, you were unable to open the project.
  <Display>
   - PS/PE-4*00 projects showed the resolution as [1600 x 1200 pixels (UXGA)], 
     regardless of the selected screen size.
  <Enhanced Recipe>
   - Copying and pasting an Enhanced Recipe Group would either paste incorrect 
     data or cause the editor to stop working.
  <Transfer tool>
   - On GP3000 Series (excluding GP-3200 series) or GP4000 Series 
     (excluding GP4000M series and GP-4100 series), if you transferred from the 
     display unit to external storage backup data that included image fonts, 
     and then you ran the [Memory Loader] - [Create Project] command using the 
     backup data, the process would continue indefinitely.
  <Simulation>
   - When the project used many addresses, Simulation occasionally failed to 
     launch.
   - Addresses with bit length of 32 bits would appear as 16 bits in simulation.
  <Project Comparison Tool>
   - When you used the Project Converter then ran the Comparison Tool on the 
     project without saving in GP-Pro EX, the Comparison Tool stopped working.
   - Comparing a project before V3.0 with a project V3.0 or later, 
     the Comparison Tool would display differences even though there were 
     no differences in the editor.
  <I/O Driver>
   - When using the CANopen driver on LT4000 Rear Module Series, the I/O screen 
     and IEC address's ID number would appear as [2] instead of the correct 
     value of [0].
 7-2 Display Unit
  (Runtime)
  <System Menu>
   - Sometimes the system menu did not display on SP5000 (Power Box), 
     PremiumDisplay (SP5500TP / SP5600TP / SP5660TP / SP5700TP).
  <Data Display>
   - When the Data Display's data type was BCD with scale display ON, the 
     scaled value was incorrect.
  <Offline>
   - On the OpenBOX, saving any settings from the offline menu would disrupt 
     communication on COM2.
  <GP-ViewerEX>
   - Connecting the OpenBOX to run time version 3.60 would halt operations.
  <WinGP>
   - Even after disabling the WriteFilter function on the OpenBOX, 
     sometimes the file write operation was not possible from WinGP.
  <Pro-face Remote HMI>
   - On asynchronous screens, enhanced recipe list parts and 
     enhanced recipe data list parts did not appear.
  <I/O Driver>
   - When using the LT4000M's Standard Analog I/O in combination with the 
     CANopen master driver, after running the automatic project transfer 
     command, Standard Analog I/O did not run.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - On Windows 8.1, when magnifying the display to more than 100%, 
     a part of the desktop or application screen did not distribute correctly.

 7-4 Device/PLC
  <Beckhoff Automation GmbH>
   - When reading the same tag data from an array as was referenced by a numeric
     display via address offset on either a window screen or previously displayed
     base screen, the screen would freeze.
   - After selecting the data type in the address input dialog box for bit screen
     parts, GP-Pro EX could end abruptly.
  <Pass-through Function>
   - The SP5000 Series Open Box's the USB mini-B port did not work with the
     Pass-through function.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Starting up the Display was slowed when using the NJ series with many tag
     names with double-byte characters (such as Japanese).
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP-5B10, when there is a communication error with the PLC, although 
     rare, operation would freeze.

 = V4.02.000 ===================================================================
 7-1 Editor
  (Editor)
  <Simulation>
   - Simulation failed to launch on Windows 8.0.
  <Transfer Tool>
   - Could not transfer project data generated by the Version Reverter and saved
     in the editor.
  <Version Reverter>
   - Not all settings were saved to the project after using the reverter, 
     occasionally causing the project to run abnormally on the display unit.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - The name of the box module SP5B10 incorrectly appeared as "SP5B40".
   - After using the offline menu to initialize user memory on the SP5000 
     (Power Box), on restart the unit would start up in Transfer mode.
  <Memory Loader>
   - After transferring the project via USB startup on the GP4000M series, 
     using the Japanese (FEP) keypad caused an error message to appear.
  <Enhanced Recipe>
   - When using the enhanced recipe feature to send recipe data from 
     the display unit to external devices, there were instances when display unit operations froze.
  <Enhanced Recipe>
   - Running [Copy Recipe] in enhanced recipe parts did not copy 
     the [Security level].
  <Filing and Enhanced Recipe>
   - Using filing and enhanced recipes at the same time froze the display unit.
  <Security>
   - After entering the password or user ID in the security screen, the display 
     unit would freeze.
  <WinGP>
   - Immediately after using a USB mini-B cable to download to the SP5000 series
     (Open Box), detaching the USB mini-B cable from the Open Box would cause it to freeze.
  <I/O Driver>
   - After stopping and then resuming the logic, analog input and temperature 
     input did not always start back up.
   - After automatically transferring the project, there were instances when 
     the updated CANopen configuration did not download to slave units.
  <Pro-face Remote HMI>
   - The SP5000 (Power Box) would freeze if it changed to online mode in the
     middle of screen distribution.

 7-3 Pro-face Remote HMI Server
  <Communication>
   - When a client tried to reconnect with the server, the client showed the
     error message "Received an invalid packet" and the client failed to connect.

 = V4.01.000 ===================================================================
 7-1 Editor
  (Editor)
  <I/O Driver>
   - When using the STD4S driver on the LT4000 series and you set the [2 Phase
     Counter] to [0-Preload], even if you turned OFF [Synchronize Output], an
     error (RGEE101) occurred if you changed the preload value. 
  <Window>
   - When you set the [Window Type] to [Word Action] and saved the project,
     restarting the screen editor and reopening the project reverted the
     [Window Control Address] to its default value.
  <Print>
   - When the interface language was Japanese, Korean, Simplified Chinese or
     Traditional Chinese, page breaks were in the wrong spots, causing blank
     pages.
  <Logic>
   - When you made subroutines with many steps, the logic program editor's
     performance would degrade.

 7-2 Display Unit
  (Runtime)
  <Historical Trend Graph>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when you displayed historical data and showed the cursor, the graph
     display was abnormal.
  <Simulation>
   - The simulation function in GP-Pro EX V4.0 had high CPU usage. 
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), the screen distorted 
     when changing to offline mode.
  <Display>
   - On the SP5000 series Open Box (SP-5B40), when you set advanced display
     in the project data settings and premium display for the display module, 
     either the screen did not display as a full screen, or the screen's right
     or bottom side extended beyond view. 
  <Picture Display>
   - Just at the moment you ran a screen capture, if the unit changed 
     to offline or transfer mode, the run time would freeze.
 7-3 Device/PLC
  <Beckhoff Automation GmbH TwinCAT ADS/AMS Driver>
   - D-Script memory copy (from PLC to display) copies only the first address 
     point in [Symbol] mode.
   - Reading STRING symbols results in error in [Symbol] mode.
   - Use of offset may cause a text display to read data from a wrong address in 
     [Tag] mode.
   - Data in TOD and DT arrays may not be displayed properly in [Tag] mode.
   - GP-Pro EX may abruptly be terminated if nodes in [Tag] mode and ones in 
     [Symbol] mode are mixed in one project.
   - Reading STRING symbols with more than 1414 characters in total in one 
     screen may result in error.
   - Pro-Server EX allows tag data to be created and edited which can lead to
     a mismatch with tag data in GP-Pro EX projects.
  <Panasonic SUNX FPSeries computer Link SIO>
   - Send monitor command when shutdown the path-through evenif setting don't use
     monitor command.
  <OMRON CS/CJ/NJ Series EtherNet/IP Driver>
   - Couldn't display odd elements of String variables on Omron PLC NJ 
     in the Data Display.

 = V4.00.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When a project included base screens set up with parts that referenced
     other base screens, moving or copying parts took longer than expected.
  <Logic Monitor>
   - When running Online Monitor over a network, the connection failed and
     showed error "Code=8".
  <Workspace>
   - In the Address workspace, double-clicking the [Feature], [Location], or
     [Screen] column reverted the list to its default sort settings.
   - The Parts Toolbox and Shape Browser showed 65,535 colors instead
     of 65,536 colors.
  <Error Check>
   - When working with a LT4000 series project with an Italian,
     Chinese (Simplified) or Korean interface, an error appeared during
     error check even though there were no errors in the project.
   - An incorrect warning message displayed when the text table language
     did not match the parts and common settings using the text table.
   - Even if function block instructions exceeded the limit, there was no
     error at error check when [Share Local Variables in Function Blocks]
     was set to do not share.
  <Graph>
   - [Semicircle Graph] did not display correctly,
     when the display unit's [Orientation] was [Landscape].
  <Properties>
   - The blink setting was available even though the display unit did not
     support blink.
  <Enhanced Recipe>
   - If you sorted by all the items in the [Recipe Group] element list,
     ran [Undo] or [Redo], and then removed an element, the application ended
     abruptly.
  <Function Block>
   - You could not use the keyboard to assign a Timer variable, Counter
     variable, or PID variable to an instructions's input or output operand.
  <Version Reverter>
   - When you saved a project with GP4201TM(Modular Type) to version
     [V3.00 - V3.01], you could not open the project in the associated
     version of GP-Pro EX.
   - When you saved a project with GP-4301TM(Modular Type) and [Enable
     Ethernet Multilink] to version [V3.00 - V3.01], sometimes opening the
     project in the associated version of GP-Pro EX disabled [Enable Ethernet
     Multilink].
   - Even though you were not supposed to be able to save a
     GP-4201TM(Modular Type) or GP-4301TM(Modular Type) project set up with
     tag data on its PLC/Device to version [V3.00 - V3.01], the save operation
     may have run.
  <Transfer Tool>
   - When running [Compare Project], some of the differences in the [Text
     Table] settings appeared as [Exclusive Screen] differences.
   - After running [Reduce Images to 16-Bit Colors] on an image part set to
     16,777,216 colors, running [Transfer Project] caused an error message to
     display.
  <Project Converter>
   - There were cases when you could not convert sampling groups associated
     with a historical trend graph that was grouped with other objects.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - After saving a project without changing any offline mode settings, there
     were some differences when compared with a project with the same settings.
   - After initializing SRAM from the WinGP offline menu, an error occasionally
     occurred when running CF->SRAM Transfer or SD->SRAM transfer.
   - On the LT3300 series and GP3300 series (except for GP-3310, GP-3360),
     the [Main Unit]-[Ethernet Local Settings] did not show the MAC address
     correctly.
   - When real-time printing of the alarm setting is enable ,if it shifts to 
     offline mode after alarm generating, operations would freeze.
  <Security>
   - When security was enabled, you could not use Internet Explorer to access 
     the FTP server.
  <Picture Display>
   - When using image fonts in a picture display, running the [Clearing action]
     occasionally erased area outside the picture.
   - The mark display was occasionally distorted when two or more picture 
     displays showed mark images on the same screen.
   - On the GP-4201TM or GP-4301TM, when you used a picture display to move 
     a mark, occasionally after-images remained of the mark in its original 
     position.
  <EZ Fingerprint Recognition Unit>
   - Updating unregistered fingerprint data appeared as a normal operation 
     when it should have been an error.
  <Memory Loader>
   - After using the Transfer Tool to download Memory Loader backup data, 
     comparison showed differences between internal data and storage.
  <Screen Transfer>
   - When the write filter setting was enabled and you transferred to WinGP, 
     on restarting WinGP, it started in transfer mode. 
   - Project transfer failed after you disabled the write filter setting 
     while WinGP was running.
   - Operations would freeze when transferring a project while there was 
     a Pro-Server EX data transfer error.
  <CSV Display>
   - Editing or saving the CSV file in the CSV display occasionally changed 
     the CSV file name.
  <Operation Log>
   - Running the SD->SRAM transfer command from the offline menu occasionally 
     added invalid content in the operation log.
  <Message Display>
   - The first time after a screen change the message display showed correctly,
     but messages did not update.
  <I/O driver>
   - On the LT4000 series with the STD4S driver, even though you ran the PCHQ 
     (pulse catch input clear) instruction, it occasionally did not clear 
     the status of the pulse catch.
   - On the LT4000 series with the STD4S driver, even though you ran the HSCQ 
     (stop high-speed counter) instruction, it occasionally did not change 
     the status of the high-speed counter.
   - On the LT4000 series with the STD4S driver, after the special I/O parameter 
     error's system variable (#L_ExIOSpParmErr) showed an error status,
     you were unable to change it back to normal status.
  <Date/Time>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM)
     the date/time would reset to "2000/00/00 00:00:00".
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when the SD card was not mounted and the SD Card Free Space (Memory Card
     Setting) was enabled, for 5 seconds after booting, the date and time showed
     "2000/00/00 00:00:00".
  <Others>
   - When there are frequent communication errors with the PLC, although rare,
     operations would freeze.
   - On WinGP, when the save destination for historical data was a folder and 
     the free disk space was zero, an error message did not appear even though 
     backup data could not save.
 
 7-3 Device/PLC
  <Digital Electronics Corporation Memory Link>
  <Digital Electronics Corporation General Ethernet>
  <Digital Electronics Corporation General SIO>
  <Schneider Electric SA MODBUS slave>
   - The Wait To Send time observed in communication may not be the same as
     the value which has been set in the Wait To Send parameter.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - For a connection with multiple NJ Series which share the same Tag Data,
     Numeric Data Displays do not display the correct PLC data. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - On startup of the display unit, an SIO Error may occur rarely.
  <Schneider Electric SA Uni-Telway>
   - A Timeout Error may occur. 
   - When the "Reference / Channel" is set to a value other than 0 
     in the Device-Specific Settings, communication does not work. 
  <Rockwell Automation, Inc. EtherNet/IP>
   - Depending on the connection configuration,
     part of the Equipment Module Tag Data that is listed in 
     the Connection Manual is not imported. 

================================================================================
Copyright (C) 2018 Schneider Electric Japan Holdings Ltd. All Rights Reserved.
"The Terms and Conditions of Software License Agreement" of Schneider Electric 
Japan Holdings Ltd. do not apply to Adobe Systems products.
All product names in this document are registered trademarks or trademarks of
their respective owners.
Pro-face is a registered trademark of Schneider Electric Japan Holdings Ltd. 
in Japan, U.S.A., Canada, Europe and other areas and countries.
No part of this document may be used or reproduced without permission.
****************************  End of Release Note  *****************************