*****************************   GP-Pro EX Ver.4.09  ****************************
                                                                       July 2023
                                               Schneider Electric Japan Holdings

Preface

Thank you for using GP-Pro EX.
GP-Pro EX is software to create logic programs and screen data for graphical 
operation touch panels.
The Windows environment ensures operability and high performance.
Please visit the Pro-face website (https://www.proface.com/en/) for the latest
information.

Table of Contents
(0) Version
(1) Supported Features List
 = V4.09.500 =====
 1-1 Support of New Features
 1-2 Supported feature
 1-3 OS support
 = V4.09.450 =====
 1-1 Support of New Features
 1-2 OS support
 = V4.09.400 =====
 1-1 Support of New Features
 1-2 Supported feature
 = V4.09.350 =====
 1-1 Support of New Features
 = V4.09.300 =====
 1-1 Support of New Features
 = V4.09.250 =====
 1-1 Support of New Features
 = V4.09.200 =====
 1-1 Support of New Features
 1-2 OS support
 = V4.09.150 =====
 1-1 Support of New Features
 1-2 OS support
 = V4.09.120 =====
 1-1 Support of New Features
 = V4.09.100 =====
 1-1 Support of New Features
 = V4.08.200 =====
 1-1 Support of New Features
 = V4.08.100 =====
 1-1 Support of New Features
 = V4.08.000 =====
 1-1 Support of New Features
 = V4.07.300 =====
 1-1 Support of New Features
 = V4.07.200 =====
 1-1 Support of New Features
 = V4.07.100 =====
 1-1 Support of New Features
 = V4.07.000 =====
 1-1 Support of New Features
 = V4.06.300 =====
 1-1 Support of New Features
 = V4.06.100 =====
 1-1 Support of New Features
 = V4.06.000 =====
 1-1 Support of New Features
 = V4.05.100 =====
 1-1 Support of New Features
 = V4.05.000 =====
 1-1 Support of New Features
 = V4.04.000 =====
 1-1 Support of New Features
 = V4.03.300 =====
 1-1 Support of New Features
 = V4.03.100 =====
 1-1 Support of New Features
 = V4.03.000 =====
 1-1 Support of New Features
 = V4.02.000 =====
 1-1 Support of New Features
 = V4.01.000 =====
 1-1 Support of New Features
 = V4.00.000 =====
 1-1 Support of New Features
(2) Limitations
 2-1 Editor
 2-2 Display Unit
 2-3 Device/PLC
 2-4 WinGP
 2-5 Pro-face Remote HMI Server
(3) When Serial No. and License Key Code are not input
(4) Installation and Uninstallation
 4-1 Installation
 4-2 Uninstallation
(5) User Registration
(6) Manuals
(7) Fixed Issues
 = V4.09.500 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.450 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Installer
 = V4.09.400 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.350 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Installer
 = V4.09.250 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.150 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.120 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.09.102 =====
 7-1 Editor
 7-2 Display Unit
 = V4.09.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.101 =====
 7-1 Installation
 = V4.08.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.08.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.101 =====
 7-1 Display Unit
 = V4.07.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.07.000 =====
 7-1 Installation
 7-2 Editor
 7-3 Display Unit
 7-4 Device/PLC
 = V4.06.300 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.200 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.06.101 =====
 7-1 Installation
 = V4.06.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.05.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.05.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.04.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 7-4 Pro-face Remote HMI Server
 = V4.04.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.400 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.03.300 =====
 7-1 Display Unit
 = V4.03.200 =====
 7-1 Editor
 7-2 Display Unit
 = V4.03.100 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.03.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.02.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Pro-face Remote HMI Server
 = V4.01.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC
 = V4.00.000 =====
 7-1 Editor
 7-2 Display Unit
 7-3 Device/PLC

Contents
================================================================================
(0) Version
 Editor:               Ver.4.09.500
 System/Runtime:       Ver.4.9.150
 Sub-system/OS Core:   Ver.4.9.150(SP5000 series, GP4000 series,
                                   LT4000 series,
                                   except for GP4000M series, GP410* series)
                       Ver.1.0.53 (STC-6300TA)
                       Ver.1.2.10 (STM6000 series)
                       Ver.1.0.16 (ST6000TA series)
                       Ver.2.2.14 (ST6000WA series)
                       Ver.1.3.14 (GP4000M series)
                       Ver.1.1.3  (GP-4104)
                       Ver.1.3.6  (GP-4105, GP-4106, GP-4107)
                       Ver.3.6.0  (ST3000 series, GP-3200 series, AGP3310HT,
                                   AGP3300HS/HL)
                       Ver.3.6.12 (Other than above models)
 Memory Loader:        Ver.4.9.150
 Readme Rev. 2

(1) Supported Features List
 = V4.09.500 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - STC6000 Series STC-6300TA is now supported.
  <GP-4000 Series (excluding GP4000M and GP410* Series), ST-6000T Series>
   - Can now use with the EZ LAN adapter.
  <Preview>
   - Using the Preview display, you can now check each state of a Picture 
     Display when its display type is set to [State Display].
   - In the Preview display, you can now show or hide multiple windows at one 
     time.
  <Communication Driver>
   - Upgrade to communication driver function
     The following functions are now supported.
     - Siemens AG TIA Portal Ethernet
       - TIA Portal V18 is now supported.
       - The PLC Password function is now supported.
     - Mitsubishi Electric Corporation Q/QnA Series Ethernet
       - Q172DSCPU is now supported.
       - Access to iQ-F Series via the network is now supported.
       - U\G, L_CS, L_CC, L_CN devices are now supported.
       - You can now set up actions that operate when writing specific bits to
         a word device.
     - Mitsubishi Electric Corporation Q/QnA Serial Communication
       - Access to iQ-F Series via the network is now supported.
       - U\G, L_CS, L_CC, L_CN devices are now supported.
       - You can now set up actions that operate when writing specific bits to
         a word device.
     - Yaskawa Electric Corporation MP Ethernet/Mechatrolink
       - Σ-10 is now supported.
     - Azbil Corporation MODBUS SIO Master
     - Azbil Corporation Controller (CPL)
       - C1M is now supported
     - ODVA EtherNet/IP Explicit Messaging
     - ODVA EtherNet/IP Target
       - Port number 2222 is now supported in the Target driver when using the 
         ODVA EtherNet/IP Explicit Messaging driver and an ODVA EtherNet/IP 
         Target at the same time.
     - Omron CS/CJ/NJ Series EtherNet/IP
       - Improved performance of handling GP-Pro EX variables.
     - JTEKT ELECTRONICS CORPORATION KOSTAC/DL Series CCM SIO
     - JTEKT ELECTRONICS CORPORATION KOSTAC/DL Series MODBUS TCPP
       - Manufacturer name has changed.
         KOYO ELECTRONICS INDUSTRIE -> JTEKT ELECTRONICS CORPORATION
     - Fuji Electric Co.,Ltd. INVERTER SIO
     - Fuji Electric Co.,Ltd. Temp. Controller MODBUS SIO
       - ST6000/STM6000 series are now supported.
  <USB Cable Driver>
   - The USB Data Transfer Driver has been updated for future part updates on 
     the SP5000 Series.
     Windows 7 and 8.1 64-bit operation systems are not supported. 

 1-2 Supported feature
   - Support for the Web Server has ended.

 1-3 OS Support
   - Windows 7 and Windows 8.1 are not supported anymore.

 = V4.09.450 ===================================================================
 1-1 Support of New Feature
  <Security>
   - To enhance security, changed project files to a new format.
     (Enhanced Project File: *.PRXE)
   - Added a new function to close the LAN communication port on the LT4000
     series.
  <Picture Display>
   - USB storage is now available as a file location for the Image Display 
     function.
  <SRAM Backup>
   - You can now set USB storage as a backup/restore destination for backup 
     memory (SRAM).
     - Offline
     - SRAM Auto Backup
  <PE/PS-4000,5000,6000 Series>
   - In the script settings, RS422/485 is now supported as a communication 
     format.
  <Enhanced Recipe>
   - Now supports importing and exporting data that can be edited in the screen
     editing software.
  <Others>
   - The run time for LT4000 series and GP4110 series units has been updated to
     accommodate future changes to parts on the display unit.
   - Items in the [Help] menu have been updated.
  <Communication Driver>
   - Upgrade to communication driver function
     The following functions are now supported.
     - Schneider Electric SA Uni-Telway
       ST6000/STM6000 series are now supported
     - Mitsubishi Electric Co., FX Series Computer Link
     - Mitsubishi Electric Co., FX Series CPU Direct
     - Mitsubishi Electric Co., FX Series Ethernet
     - Mitsubishi Electric Co., Q Series CPU Direct
     - Mitsubishi Electric Co., Q Series QnU CPU Ethernet
     - Mitsubishi Electric Co., iQ-R/F Ethernet (SLMP Client)
     - Keyence Corporation KV-700 - 8000 SIO
     - Keyence Corporation KV-700 - 8000 Ethernet
       You can now set up actions that operate when writing specific bits to 
       a word device.
     - Rockwell Automation EtherNet/IP
       RSLogix5000 software version Ver.34 and earlier are supported by the L5K
       import function.
     - CoDeSys Automation AllianceCoDeSys V3 Ethernet
       You can now select the storage order of words in 32-bit data.
     - ODVA EtherNet/IP Explicit Messaging
       - Number of device/PLC connections has increased.
       - EDS file is now supported.
       - The [Output Only] setting in the Implicit Messaging function is now 
         supported.

 1-2 OS Support
   - The following products now run on Windows 11.
     - GP-Pro EX (screen editor)
     - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - WinGP
     - WinGP SDK
     - Device Data Copy Tool
     - Pro-face Remote HMI Server
     - GP-Viewer EX

 = V4.09.400 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - ST6000 Series ST-6300TA and ST-6500TA are now supported.
  <Security>
   - Added a function so you can close the LAN communication port.
  <File Manager>
   - Added a function so you can change the number of pages to scroll.
  <Others>
   - The run time has been updated to accommodate future changes to GP-4000 
     Series (excluding GP4000M and GP410* Series) display unit parts.
  <Communication Driver>
   - New communication driver is supported
     The following is now supported.
     - ODVA EtherNet/IP Target
   - Upgrade to communication driver function
     The following functions are now supported.
     - ODVA EtherNet/IP Explicit Messaging
       Schneider ATV Series is now supported.
     - KEYENCE Corporation KV-700 - 8000 Ethernet
       The driver name has changed from "KV-700/1000/3000/5000 Ethernet" to 
       "KV-700 - 8000 Ethernet".
       Import variable function is now supported. (KV-8000 only)
     - KEYENCE Corporation KV-700 - 8000 SIO
       The driver name has changed from "KV-700/1000/3000/5000 CPU Direct" to 
       "KV-700 - 8000 SIO".

 1-2 Supported feature
   - Support for the Remote PC Access function has ended.

 = V4.09.350 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - The STM6000 Series STM-6200WA, STM-6400WA, and STM-6B00 are now supported.
  <Pro-face Remote HMI>
   - ST6000 Series now support using Pro-face Remote HMI.
  <Pro-face Connect>
   - ST6000 Series now support using Pro-face Connect.
  <Others>
   - The run time has been updated to accommodate future changes to GP-4000 
     Series (excluding GP4000M and GP410* Series) display unit parts.
  <Communication Driver>
   - Upgrade to communication driver function
     The following functions are now supported.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet (SLMP Client)
       Added setting for communication code (binary, ASCII).
       When iQ-F is selected, now supports settings to  access other stations.
     - Siemens AG TIA Portal Ethernet
       TIA Portal V17 is now supported.
  <I/O Driver>
   - Upgrade to I/O Driver function
     The following function is now supported.
     - EXM Driver
       TM3 analog unit is now supported.

 = V4.09.300 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - PS6000 Series are now supported.
   - SP5000 Series (SP-5B411 and SP-5B412) are now supported.
  <WinGP>
   - WinGP is now available for use with user rights.
   - Added support to use "Program Files" to strengthen safety of the 
     installation folder.
   - User memory initialization is now supported.
   - Initializing the connection key is now supported with the user memory 
     initialization feature.
  <Memory Loader>
   - When using the Memory Loader, the initial connection key registered in the
     Transfer Tool can now be reflected to the display unit.
  <Communication Driver>
   - Communication Driver Feature Upgrade
     The following function is now supported.
     - Shibaura Machinery Corporation - TC/TS Series Ethernet
       TC200 Series devices are now supported.
     - Keyence Corporation - KV-700/1000/3000/5000 CPU Direct
       KV-8000 Series devices are now supported.
     - Keyence Corporation - KV-700/1000/3000/5000 Ethernet
       KV-8000 Series devices are now supported.
     - Omron Corporation Temp.Controller CompoWay/F
       New models now supported.
       Models:E5CD/E5ED/E5GC/E5CC/E5EC/E5AC/E5DC/E5CC-T/E5EC-T/E5AC-T/
              E5CN-H/E5AN-H/E5EN-H
     - Koyo Electronics Co., Ltd - KOSTAC/DL Series CCM SIO
       D4-454 CPU is now supported.
     - LS Electric Corporation - XGT/XGB Series Fenet
       Variables are now supported.

 = V4.09.250 ===================================================================
 1-1 Support of New Feature
  <ST6000 Series>
   - Now support connecting the following peripheral equipment to the USB port.
     - EX Fingerprint Authentication
     - EZ Illumination Switch
     - Printer
     - USB-HUB
   - "Screen Capture" is now supported.
   - Screen hardcopy is now supported.
   - Now supports communication speeds of 19,200 bps and higher with the Modbus
     Slave device driver.
   - Now supports all the COM ports on the ST-6200.
   - Improved the ST6000 Series screen transfer times over the USB Micro B port.
  <Historical Trend Graph>
   - The 32-bit Float data type is now supported when the [Display Method] is
     set to [Display Range].
  <Parts List>
   - When you use the Text Table for labels, you can now import items except its
     labels.
  <Transfer Tool>
   - Improved the speed of receiving projects over the LAN.
  <WinGP>
   - Now supports displaying asterisks in all locations in the offline screen
     where you can enter a password.
  <Communication Driver>
   - New communication driver
     The following device type is now supported.
     - SHIBAURA MACHINE CO., LTD. TC/TS Series Ethernet
   - CoDeSys Automation AllianceCoDeSys V3 Ethernet
     - "User Management" is now supported.

 = V4.09.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - ST6000 Series ST6200/6400/6500/6600/6700 now supported.
     However, with the following limitations.
     => All previous limitations are now resolved in V4.09.250.
     - The ST-6200 COM port supports RS-232C only. It does not work otherwise. 
       In the communication settings, select RS-232C.
     - Cannot use the following peripheral devices that connect to the USB port.
       EZ Fingerprint Recognition Unit, EZ Illuminated Switch, Printer, USB HUB
     - Cannot perform screen capture.
     - Cannot print screen hard copies.
     - When using the COM port in D-Script, Global D-Script, or Extended Script,
       select any communication speed other than 115200 bps.
       If you select 115200, a receive error may occur.
     - When using Modbus Slave, set the communication speed to 19200 or slower.
  <Password Settings>
   - Password authentication setting has been added for the delete operation of
     locked screens and locked scripts.
  <Send email>
   - The terminal name has been changed in the body of Pro-face Remote HMI 
     emails.
  <WinGP>
   - Windows UWF is now supported.
  <Communication Driver>
   - The manufacturer name "LS Industrial Systems Co., Ltd." has been updated
     to "LS ELECTRIC Co., Ltd." for the following drivers.
     -  GLOFA Series Cnet
     -  MASTER-K Series Cnet
     -  XGK Series CPU Direct
     -  XGT/XGB Series Fenet
     -  XGT/XGB Series Cnet
   - The following drivers now support CP2E.
     - OMRON Corporation CS/CJ Series Ethernet
     - OMRON Corporation CS/CJ Series HOST Link

 1-2 OS Support
   - Windows 8 is not supported anymore.

 = V4.09.150 ===================================================================
 1-1 Support of New Feature
  <New Feature>
   - The first time a user transfers project data, 
     the application requires setting up a connection password.
     A connection password is required for each display unit.
  <Communication Driver>
   - Newly-added communication driver
     The following is now supported.
      - Shenzhen Inovance technology HMI Monitor Protocol
   - Shibaura Machiner Co., Ltd. TC Series (TCmini/TC200)
     - Change in maker name.
       TOSHIBA MACHINE Co., Ltd. -> SHIBAURA MACHINE CO., LTD.
   - Rockwell Automation, Inc. EtherNet/IP
      - Micro800 series is now supported.
   - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
      - Now supports selecting the series of external devices.
   - Siemens AG TIA Portal Ethernet
      - TIA Portal V16 is now supported.
      - Now supports communication with the new firmware version for the PLC.

 1-2 OS Support
   - Windows XP and Windows Vista are not supported anymore.

 = V4.09.120 ===================================================================
 1-1 Support of New Feature
  <New Feature>
    <Communication Driver>
   - Newly-added communication driver
     The following is now supported.
      - Shenzhen Inovance technology Modbus TCP"
   - Rockwell Automation, Inc. EtherNet/IP
      - RSLogix 5000 version 31 is now supported.
  
 = V4.09.100 ===================================================================
 1-1 Support of New Feature
  <New Feature>
   - You can now send E-mail from the display unit.
       * It needs .Net Framework Ver. 4.5 or later to use this feature.
  <Sampling>
   - You can now add the hours, minutes, and seconds to the CSV file name of
     sampling data.
  <Alarms>
   - You can now add the hours, minutes, and seconds to the CSV file name of
     exported alarms.
  <Offline>
   - Only part of the input value display and the key code display for GP-Viewer
     and Remote PC Access functions are shown.
  <Communication Driver>
   - Newly-added communication driver
     The following is now supported.
      - CRRC Train Real Time Data Protocol
      - SAE International J1939
      - KEYENCE Corporation KV MODE (HOST LINK) SIO
      - Shenzhen Inovance technology Modbus RTU Mode
   - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
     - The address range for KV7000 Series has been increased (R999->R1999).
   - Panasonic IndustrialDevices SUNX MEWTOCOL-COM Ethernet
     - FP0H and FP2H+ET-LAN2 are now supported.
   - Siemens AG TIA Portal Ethernet
     - TIA Portal V15.1 is now supported.
   - OMRON Corporation CS/CJ/NJ Series EtherNet/IP
     - In the Input Address screen, the filter display function is now supported
       when entering tags.
   - JTEKT Corporation TOYOPUC CMP-LINK SIO
   - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
     - PC10G-CPU supported devices are now expanded.

   <Extended Scripts>
   - Error handling of _decasc2bin() in User Defined functions now improved.
   <Others>
   - Only part of the key code display for Version Information of the screen
     editor is shown.

 = V4.08.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - SP5000 Series SP-5B00 and SP-5B90 are now supported.
   - SP-5B00, SP-5B10 and SP-5B41 now support the following display module.
      -  SP-5600TA (XGA)
   - SP-5B90 now supports the following display modules.
      -  SP-5490WA (WVGA)
      -  SP-5690WA (WXGA)
      -  SP-5790WA (FWXGA)
  <New feature>
   - Combine the SP5000 Series Open Box (SP-5B41) with a DC Power Adapter to 
     support a high resolution.
  <Operation Log>
   - You can now save the following part operations to the operation log from 
     Remote HMI.
      - Data Display
      - Special Data Display (Show CSV)
      - Sampling Data Display
  <Communication Driver>
   - Beckhoff Automation GmbH TwinCAT ADS/AMS
     - RETAIN Type is now supported.
   - Siemens AG TIA Portal Ethernet
     - TIA Portal project size indicator now added to 
       the Individual Device Settings dialog box.
  <Others>
   - PS5001B Atom Box is now supported.
  
 
 = V4.08.100 ===================================================================
 1-1 Support of New Feature
  <Others>
   - The run time for GP-4201TM (Modular Type) and GP-4301TM (Modular Type) 
     units has been updated for future changes to parts on the display unit.
  <Communication Driver>
   - The latest manuals are not installed with version GP-Pro EX 4.08.100.
     Please get the latest manuals from our home page.
     http://www.pro-face.com/trans/en/manual/1001.html

   - Siemens AG TIA Portal Ethernet
     TIA Portal V15 is now supported
   - Crouzet Millenium 3 FBD
     Now supported in WinGP.
   - ODVA EtherNet/IP Explicit Messaging
     - Added Real Time Format selection.
     - Added Customer Explicit Message setting.
   - Schneider Electric SA MODBUS SIO Master
   - Schneider Electric SA MODBUS TCP Master
     Modicon M221 series is now supported.
  
 
 = V4.08.000 ===================================================================
 1-1 Support of New Feature
  <Supported models>
   - DC Power Supply Adapter for SP5000 Series Power Box is now supported.
  <NEW functionality>
   - You can now set up multiple character keys with Key parts.
  <Operation Log>
   - You can now save Remote HMI operations to the operation log.
  <Online Update>
   - You can now install the newest version of GP-Pro EX directly
     from an existing installation of GP-Pro EX.
  <Communication Driver>
     - Mitsubishi Electric Corporation A Series Computer Link
     - Mitsubishi Electric Corporation FX Series Computer Link
       - Format 1 control protocol is now supported.
     - Rockwell Automation, Inc. EtherNet/IP
       - RSLogix 5000 version 30 is now supported.

 = V4.07.300 ===================================================================
 1-1 Support of New Feature
  <Supported models>
   - The SP5000 Series Open Box (SP-5B41) and Power Box (SP-5B10) now support
     the following display modules:
      -  SP-5700WC (FWXGA)
      -  SP-5800WC (FWXGA)
   - The following display modules now support VM Unit(GP3000-VM01) and
     RGB Input Unit(GP3000-RGB201):
      -  GP-4621T
      -  GP-4521T
   - The following model is now supported.
      -  GP-4115T3
  <Communication Driver>
     - Siemens AG TIA Portal Ethernet
       - TIA Portal V14 is now supported.

 = V4.07.200 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4200 Series and GP4300 Series.
  <NEW functionality>
   - SP5000 Series Power Box (SP5B10) now supports I/O driver listed below.
      -  FLEXNETWORK
      -  CANopen

 = V4.07.100 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - EZ LAN Adapter now supports GP4400 Series, GP4500 Series, and
     GP4600 Series.
  <NEW functionality>
   - Pro-face Connect is now supported.
  <Communication Driver>
   - Newly-added communication driver 
     The following features supported.
     YASKAWA INFORMATION SYSTEMS MMCloud TCP Client.

 = V4.07.000 ===================================================================
 1-1 Support of New Feature
  <Supported Models>
   - GP-4G01 is now supported.
   - SP5000 Series Open Box (SP-5B41) is now supported.

  <Sampling>
   - You can now append the date and time to sampling CSV file names.
   - You can now transfer sampling CSV files to an FTP server.

 = V4.06.300 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - DC Power Supply Adapter for SP5000 Series Open Box is now supported.

  <Simulation>
   - External PLC simulator now supports GX-Works2/GX-Works3.

  <Communication Driver>
   - Function version upgraded communication driver
     The following features supported
     - Siemens AG TIA Portal Ethernet
       - The following settings were added
         - SP5000 Series
         - GP4000 Series
         - GP4100 Series(GP4114)
     -PROFIBUS International PROFIBUS DP Slave
       - SP5000 Series(SP-5B10)
     -OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Tag search
       - Remove array item number zero limitation
       - Support LREAL Tag type (Convert to 32 bits Float type) (Only NJ Series)
     -YASKAWA Electric Corporation INVERTER/SERVO SIO
       - Support GA700 Series
     -YASKAWA Electric Corporation MP Ethernet/MECHATROLINK
       - Support Sigma-7C
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - Expand MR device address(Max MR999 to MR3999) for KV-7500 CPU.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet(SLMP Client)
       - Passed CC-Link Certification
       - Support iQ-R New CPU
       - Support other station access command
       - Changed driver name (Added [SLMP Client])

  <Others>
   - WinGP now supports Windows 10.

 = V4.06.100 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - SP5000 Series Open Box (SP5B40) now supports the following display modules:
     - SP-5600TP  SVGA (800*600)
     - SP-5660TP  SVGA (800*600)
     - SP-5700TP  SVGA (800*600)
  <NEW functionality>
   - SP5000 Series Power Box (SP-5B10) now supports display modules with 9-point
     calibration settings.
  <Editor>
   - The [Do not transfer all if no change in project] option is now available
     in the [Save as] dialog box.
  <Enhanced Recipe>
   - You can now use system variables to check the recipe label of enhanced
     recipes.
  <Transfer Tool>
   - You can now edit a display unit's [Ethernet] settings from
     the Transfer Tool.
  <Others>
   - You can now use system variables to check the project file name.

 = V4.06.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - GP-4311HT is now supported.

 = V4.05.100 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - On the Open Box, you can now use WinGP to check the status of 
     the operating system's Enhanced Writer Filter (EWF).

 = V4.05.000 ===================================================================
 1-1 Support of New Features
  <Supported models>
   - The following 3 models are now supported.
     - GP-4114T
     - GP-4115T
     - GP-4116T

  <Pro-face Remote HMI>
   - You can now use the device/PLC to change screens on Remote HMI (client) set
     to asynchronous mode.

  <Communication Driver>
   - Function version upgraded communication driver
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Pass-Through function supported.
     - YASKAWA Electric Corporation MP Ethernet/MECHATROLINK Driver
       - The driver name changed from "MP/INVERTER/SERVO Ethernet" to
         "MP Ethernet/MECHATROLINK".
       - R7G4HML3-LC2 of M-System Co., Ltd now supported.
       - K1G of Azbil Corporation now supported.
     - Cognex Corporation In-Sight Vision Systems
       - In-Sight 7000 now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
       - KV-7000/KV-Nano Series now supported.
     - KEYENCE Corporation KV-700/1000/3000/5000 Ethernet
       - KV-7000/KV-Nano Series now supported.

  <Others>
   - PS-5000, PS/PE-4*00 series and PC/AT now support portrait orientation.
   - The following products now run on Windows 10.
     - GP-Pro EX (screen editor)
     - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - Device Data Copy Tool
     - Pro-face Remote HMI Server
     - GP-Viewer EX

 = V4.04.000 ===================================================================
 1-1 Support of New Features
  <NEW functionality>
   - WinGP now supports True Colors for Image and JPEG files.
   - WinGP now supports high resolution for PS-5000, PS/PE-4*00 series 
     and PC/AT.
   - The Project Converter now supports LT3300T.
   - You can now enter the GP-Viewer EX key code from the Transfer Tool.
   - WinGP now supports PS-5000 series.
   
  <Others>
   - WinGP SDK now runs on Microsoft .Net Framework 4.0.
   
  <Communication Driver>
   - Newly-added communication driver 
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
     - Panasonic Industrial Devices SUNX MEWTOCOL7-COM Ethernet
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Custom Explicit now supports "Get Attribute Single" Service (0x0e) and
         "Set Attribute Single" Service (0x10).
     - Azbil Corporation Controller (CPL)
       - Burner Controller BC-R series now supported.
     - Mitsubishi Electric Corporation Q/QnA Series Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Mitsubishi Electric Corporation Q Series QnU CPU Ethernet
       - High-Speed Universal Model (QnUDVCPU) now supported.
     - Rockwell Automation, Inc. EtherNet/IP
       - When automatic port number allocation is enabled, you can now configure
         Individual Device Settings to one physical target PLC for both the 
         "ControlLogix/CompactLogix Series" and 
         "Control/Compact/Flex Logix Series Native".
     - JTEKT Corporation TOYOPUC CMP-LINK SIO
       - PC10G-CPU now supported.
       - PC3JG-CPU's EB device now supported.
     - JTEKT Corporation TOYOPUC CMP-LINK Ethernet
       - PC3JG-CPU's EB device now supported.
       - Relay communication now supported.
     - Azbil Corporation MODBUS SIO Master
       - Series name change from KG to K1G.
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - AMS NetID setting now supported in offline mode.
     - Pass-Through Function Setting Tool
       - Timeout setting now supported.
     - Mitsubishi Electric Corporation iQ-R/F Ethernet
       - Label import function now supported (iQ-R series only).
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
       - Change in maker name.
         Panasonic Electric Works SUNX Co., Ltd. 
         -> Panasonic Industrial Devices SUNX
     - Seiko Epson Corporation Remote Ethernet
       - A new device now supported.
     - Siemens AG SIMATIC S7 MPI Direct
       - Tag import dialog box now improved.
     - Siemens AG SIMATIC S7 Ethernet
       - Tag import dialog box now improved.

 = V4.03.300 ===================================================================
 1-1 Support of New Features
  <Others>
   - GP4000 series (except for GP4100 series, GP-4201TM and GP-4301TM)
     supported compatible parts for stable service.
 = V4.03.100 ===================================================================
 1-1 Support of New Features
  <Device/Option Support>
   - You can now expand the user screen area in AGP-3560T.
 
 = V4.03.000 ===================================================================
 1-1 Support of New Features
  <Enhanced Recipe>
   - You can now check search results from a recipe list part by using system 
     variables.
   - You can now use a system variable to copy, save, and reload recipes. 
   - You can now receive recipe labels.

  <Runtime Improvements>
   - The File Manager can now use the Remove DEL Key feature with CF/SD cards.

  <Pro-face Remote HMI>
   - Pro-face Remote HMI is now available in WinGP.
   - Pro-face Remote HMI now supports multiple client connections.

  <Communication Driver>
   - Function version upgraded communication driver
     - OMRON Corporation CS/CJ/NJ Series EtherNet/IP
       - Added support for double-byte characters on the NJ series.
     - YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet
       - Sigma-7 series is supported.

 = V4.02.000 ===================================================================
 1-1 Support of New Features
  <Pro-face Remote HMI Server>
   - In the Common Settings, you can now set up [No timeout] for the timeout
     time.

  <Pro-face Remote HMI>
   - In the Common Settings, you can now set up [No timeout] for the timeout 
     time.
   - When communication is unstable, you can now define a timer for terminating
     the connection.

  <NEW functionality>
   - When using the Start application command, you now have the option to 
     suppress WinGP CPU usage.

  <Communication Driver>
   - Function version upgraded communication driver
     - ODVA EtherNet/IP Explicit Messaging
       - Implicit messaging now supported.
       - Custom Explicit message now supported.
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200) Device Data Copy Tool
       - Now supports VGA display.
     - YASKAWA Electric Corporation MEMOBUS Ethernet Device Data Copy Tool
       - Added support for new transfer files. (Maintenance Monitor Setting, 
         FTP Client definition.)

  <Others>
   - The following products now run on Windows 8.1.
     - GP-Pro EX (screen editor)
       - Transfer Tool
     - Version Reverter
     - Project Comparison Tool
     - Project Converter
     - Recovery Tool
     - Pass-Through
     - WinGP
     - WinGP SDK
     - Device Data Copy Tool
   - Open Box (SP5B40) models now support portrait orientation.
   - The following now support VGA display:
     - SP5000 series
         (Box Module)
           - SP-5B10
         (Display Module)
           - SP-5500TP
           - SP-5600TP
           - SP-5660TP
           - SP-5700TP

 = V4.01.000 ===================================================================
 1-1 Support of New Features
  <Editor Improvements>
   - You can now import the recipe data of enhanced recipes.

  <Runtime Improvements>
   - Importing/exporting enhanced recipes
    You can now import and export element labels and recipe labels. 
   - Enhanced recipe search
    You can now use system variables to search for enhanced recipes.
   - Mapped address
    You can now edit enhanced recipe element values on the device/PLC.
   - Send options
    When transferring an enhanced recipe to a device/PLC, you can write 
    the enhanced recipe's label and ID to the defined address. 

  <Communication Driver>
   - Function version upgraded communication driver
     - Beckhoff Automation GmbH TwinCAT ADS/AMS
       - Support TwinCAT3.
       - Reading a large number of array elements has been optimized.


 = V4.00.000 ===================================================================
 1-1 Support of New Features
  <Supported Models>
   - The following models are now supported:
     - GP-4000M (Rear Modular Type)
     - SP5000 series
         (Box Module)
           - SP-5B10
           - SP-5B40
         (Display Module)
           - SP-5400WA WVGA(800*480)
           - SP-5500WA WXGA(1280*800)
           - SP-5500TP SVGA(800*600)
           - SP-5600TP XGA(1024*768)
           - SP-5660TP XGA(1024*768)
           - SP-5600WA WXGA(1280*800)
           - SP-5700TP XGA(1024*768)

  <Pro-face Remote HMI>
   - Pro-face Remote HMI Server function is now supported.
   - Pro-face Remote HMI function is now supported on the SP5000 Series.
   - Pro-face Remote HMI function is now supported on the GP-4000M Series.
   - Server list screen now supports monitoring triggered alarms.

  <Editor Improvements>
   - You can now create a project using
     [Create Project From Configuration File (Pro-face Device Configurator)].
     
  <Communication Driver>
   - Newly-added communication driver 
     - CoDeSys Automation Alliance CoDeSys Ethernet
     - CoDeSys Automation Alliance CoDeSys SIO
     - Control Techniques MODBUS SIO Master
     - Control Techniques MODBUS TCP Master
     - IEC Standard IEC 60870-5-101
     - Siemens AG Ethernet Gateway MPI/PROFIBUS
   - Function version upgraded communication driver
       - Mitsubishi Electric Corporation FX Series CPU Direct
           The following setting was added: 
             FX3S Series is supported.

(2) Limitations
 2-1 Editor
  <Screen Editor>
   - #H_ScanOffControl does not appear in the Address and Cross Reference
     windows.
   - If you use the version reverter on a project set up with a sampling group
     associated with consecutive addresses and sampling words of 2 or more, 
     the project may not be converted or the sampling settings may be deleted.
   - Sometimes dragging parts from one screen editor and dropping to another
     does not produce a copy.
   - When memory usage on the computer is high, and the project data exceeds 
     the maximum size, the project information may show the project 
     transmission size as 0 bytes (0.0%).
  <Graph>
   - If you draw an XY Historical Trend Graph or XY Data Block Graph on
     base screen 9000 or higher, the graph display area will not appear on
     the display unit nor in simulation.
  <Project Comparison Tool>
   - Comparison result of [Device/PLC settings] may appear as "Different"
     though project files have same [Device/PLC] Settings.
  <Copy From Other Project>
   - While copying from another project that is very large, sometimes the screen
     editor will close unexpectedly. When that happens, split screens into 2 and
     perform copy operations separately.
  <Transfer Tool>
   - When setting the [GP-Viewer EX Function key code], match the Runtime 
     version (and System version) on the display unit and screen editing 
     software.
   - Depending on the environment, sometimes transferring via modem may not
     work.
   - Transferring via COM or modem will fail sometimes. If that occurs, try 
     again.
  <Address Conversion>
   - When specifying addresses with large address numbers, in some cases only
     addresses smaller than the maximum input address are allowed to be 
     specified.
  <Others>
   - The screen editor does not support the Windows 10 feature [Beta: Use
     Unicode UTF-8 for worldwide language support].

 2-2 Display Unit
  (Runtime)
  <USB Device>
   - When a USB device is inserted/removed, all USB devices may not become 
     disabled under the condition that five or more USB devices are connected 
     at the same time using the USB HUB in GP-4000 series. 
     If this phenomenon occurs, reset the Display.
  <Data Display>
   - When two or more Data Displays with "Indirect" specified are made to be 
     invisible at the same time while displaying a pop-up keypad, some Data 
     Display may not be invisible.
  <RPA>
   - A keypad is closed while the [Alt] key on the keypad of the RPA 
     Window Display is held down. When the keypad is opened next time, 
     the [Alt] key remains held down.
  <USB/SIO>
   - Do not use a logic program during communication with a Device/PLC using 
     a USB/SIO (RS422/485).
     If the logic program is used in the situation, a communication error 
     may occur.
  <Online Monitor>
   - Display of instructions in the logic monitor and online monitor are
     sometimes different.
  <Logic Program>
   - In GP4000 series (except for GP-4100 series) and LT4000 series, the buzzer 
     sound in Ver. 3.5 is different from that in Ver. lower than 3.5.
   - While logic is stopped on the GP-4G01, if you press and hold down
     both the [USB1] and [SD] removal switches at the same time, 
     the [PWR] LED lights start flashing irregularly.
  <EZ Fingerprint Recognition Unit>
   - Do not attach/detach the fingerprint authentication unit while turning on
     the power to the Display. Doing so, inconsistency occurs between the
     security data and the fingerprint data and the display of the
     authentication and the password setting may not operate normally. 
     If an inconsistency occurs between them due to attachment/detachment of the
     fingerprint authentication unit, update the fingerprint data of the
     fingerprint authentication unit using the "Update DB" function.
  <Screen Transfer>
   - Do not attach/detach the transfer cable while transferring to the SP5000 
     Series Open Box (SP-5B40). Even if the cable is detached, the unit will not
     detect an error.
   - On the Power Box(SP-5B10) of the SP5000 series, In the case of forced 
     transfer mode, you cannot transfer using LAN2.
   - If the project is large and many functions are set up, the display unit
     may restart repeatedly after transfer.
   - On the GP-4000 series (except GP4000M and GP41** series) and GP-4G01, 
     project transfer may fail for large projects.
     If that happens, transfer the project again.
  <Bit Momentary Switch>
   - Compared to other series, the buzzer for the Open Box's (SP-5B40) Bit 
     Momentary switch sounds different.
  <System Menu>
   - The Windows task bar flickers if you continually trigger the system menu's
     display operation (simultaneously touch the top-right and bottom-left
     corners) on the SP5000 series Open Box (SP-5B40).
   - On models that support 2-point touch, while the first touch is initiated
     and you work with the system menu, system menu operations may not work.
     Display the system menu again and menu operations become available.
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), even though there are no devices
     connected, in the offline menu, the Peripheral Settings screen's USB Screen
     shows USB equipment.
   - On the GP4200 Series, GP4300 Series, and LT4000 Series, you cannot edit
     Web Server settings offline.
   - With the SP5000 Series Power Box (SP-5B10) and WinGP, do not touch
     the top-right or top-left corners while starting up. 
     While normally this would take you to offline mode, there are certain
     circumstances when this will not work.
  <Memory Loader>
   - On the GP-4100 Series (Color Model), if you download the different CML file
     in a row without ending the memory loader, SRAM may be initialized
     after restarting the display unit.
  <Image Parts>
   - When the [Compress] check box is selected, transparency may not display
     properly.
  <Enhanced Recipe>
   - Search results may not display if you use system variables to search
     for a recipe, while deleting a recipe in an Enhanced Recipe List part.
     When this occurs, reset the display unit.
   - When there are a large number of recipes, importing recipes may take
     considerably longer than it did in Ver.4.6.10.
   - On the display unit, you can add enhanced recipe data to a project even if
     it exceeds 100% of its maximum transfer size. On the editor, if you use the
     Receive Project command to get the project from the display unit, 
     you may not be able to transfer the project back to the display unit 
     due to a transfer size error.
   - If you set up a variable with less than 32 words as the label's destination
     address, the enhanced recipe may not work properly.
  <Change screen>
   - If you use a Word Add or Word Subtract switch on a device address
     that is used to define the screen number in a change screen switch, 
     the expected screen may not display if you change screens quickly.
     To reliably change screens, use a Selector switch.
  <External Buzzer Output>
   - When [Display Unit] - [Operation] - [Output to External Buzzer Terminal]
     is enabled on the GP3300H or GP4000H series, the GP3000H conversion adapter
     emits the external buzzer for the following operations from the maintenance
     menu.
     - Check Pattern
     - Check Touch Panel
     - Calibrate Touch Panel
     - Check COM1/COM2/LAN
     - Memory Info
     - Check Function Switch
  <Pro-face Remote HMI>
   - On the GP-4621T or GP-4521T, video module images of VM Unit and RGP Input 
     Unit do not display on the Remote HMI client side.
   - When connecting to OpenBox, occasionally screen distribution
     may be delayed.
   - When the Pro-face Remote HMI is connected to HMI via the EZ LAN Adapter,
     you may not be able to reconnect automatically when unplugging
     then plugging back in the EZ LAN Adapter.
     Please return to the server list and reconnect.
   - Do not operate the SD/USB switches from a client.
     You can perform Memory Loader operations only from the display unit itself,
     and therefore are unavailable from the client.
  <File Manager>
   - Occasionally the File Manager does not sort its operation
     log's output files in file creation order.
   - While all items are selected in the File Manager with the [All] button,
     and the FTP server connection is released, the [All] button becomes
     highlighted. If this occurs, close the File Manager and open again.
   - While the "Confirm Delete" message box displays as a result of touching
     the [DEL] button in the File Manager, if you attach or detach USB memory
     the File Manager does not display the files in USB storage.
     If this occurs, close the File Manager and open again.
   - When the File Manager is connected to the FTP server and
     a file is not selected, sometimes the file date, time, and size may display
     incorrectly. If this happens, select a file in the File Manager.
   - Selecting either [Cancel] or [No] in a File Manager connected to
     the FTP server sometimes causes the date, time, and size of the wrong file
     to display. If this happens, select another file in the File Manager.
   - When the File Manager is connected to the FTP server and a copy file
     operation fails, the incorrect file name may appear in
     the confirmation message box.
  <Screen capture>
   - In the destination, if you specify an FTP server with PASV disabled,
     file write may fail and a 0-byte sized file may be created
     in the destination folder.
  <Feature>
   - When using GP4000M or LT4000M Series, restarting the display unit will 
     erase the Japanese FEP information.
  <Pro-face Connect>
   - When connecting multiple SiteManager Extend and LinkManager to an Open Box
     set up with SiteManager, Pro-Server EX may not operate properly on some of
     the LinkManager.
   - Sending or receiving large projects via LinkManager fails sometimes.
   - If LinkManager is already installed and you install LinkManager again,
     sometimes the existing shortcut is not deleted and results in duplicate
     shortcuts.
   - If you forcibly transfer via Link Manager a project to a display unit
     set up as the agent of Site Manager Extend, the transfer operation
     sometimes fails.
   - With SiteManager Embedded, the Transfer Tool, GP-Viewer EX and Pro-Server
     may not be able to automatically detect display units.
   - With SiteManager Embedded, you can use only ASCII text for
     the Proxy Password.
   - Brightness
     On the GP-4100 Series color model, while power is supplied from 
     the USB (mini-B) interface and power is also supplied by the DC power 
     supply, the screen brightness will not match the defined value.
     Remove the cable from the USB (mini-B) interface before turning on the 
     power.
  <Time zones>
   - Sometimes the "Automatically adjust daylight saving time" setting
     changes on the GP-5B40 and SP-5B41.
  <E-mail>
   - When there is no body of E-mail, its subject may be not shown correctly.
     To avoid this situation, set one or more characters to its body.
   - Make sure your network is secure when use E-mail feature.
  <Others>
   - Turning on the display unit with the SD card inserted, it may take a few
     seconds longer to show the initial screen.
   - If project data is downgraded to before GP-Pro EX V4.09.120, 
     GP-Viewer EX and Remote PC Access key codes have to be re-entered.
  <Start application>
   - The feature has been designed to execute external applications.
     External applications may increase security risk and harm the system.
     Review the usage of this feature before transferring.
  <Port Control>
   - Even though you may close the port for SiteManager Embedded (Pro-face 
     Connect), when a Web-Proxy is set up, connection is sometimes still 
     possible.
  <ST6000/STM6000 Series>
   - The CI (RI) signal on the RS-232C interface cannot be used. To disable VCC,
     select RI.

 2-3 Device/PLC
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - In Pro-Server EX's Device Monitor function 
     when a Multiple Bit Write operation is performed on an array type Tag 
     it may not write correctly. 
   - When single bit write operation is performed on a 32-bit Tag(DINT), 
     the 16th bit cannot be written. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - When a Copy / Paste operation which results in the maximum number of Tags
     being exceeded no error is displayed. 
   - When several Tag Data Files are created, the maximum number of Tags 
     may not be checked correctly. 
   - When using the ST6000 Series, frequent touches could cause a communication
     error.
  <SHIBAURA MACHINE Co., Ltd. TC Series(TCmini/TC200)>
   - In Pro-Server EX's Device Monitor function the Multiple Bit Write 
     operation may not work in some cases.
  <Fuji Electric Co., Ltd. MICREX-SX Series SIO>
   - Do not use "Indirect" setting for the String type. If it is specified, 
     data may not be displayed normally.
   - When STRING variables are displayed in Device Monitor of Pro-Server EX, 
     only two characters are displayed.
  <GE Fanuc Automation Series 90-30/70 SNP>
   - Some spelling mistakes are found in English error messages.
  <GE Fanuc Automation Series 90-30/70 SNP-X>
   - If an error occurs during communication, set "1" or larger value 
     for Retry Count.
  <Mitsubishi Heavy Industries, Ltd MHI STEP3 Ethernet>
   - When a bit device is specified in Alarm Summary, alarms of 17th bit or 
     later are not displayed normally. If this phenomenon occurs, use the word 
     device.
  <Mitsubishi Electric Corporation FREQROL Inverter>
   - When the link parameter device is read, the communication cycle time 
     becomes an illegal value.
  <Mitsubishi Electric Corporation Q Series CPU Direct Connection>
   - In a screen where a Display Unit does not communicate with a PLC:
     When an access is made to the PLC using the pass-through function 
     after the PLC is restarted, the password lock occurs to the PLC.
     Make connections using the pass-through function after the screen is 
     shifted to the one where the Display Unit communicates with the PLC.
   - Do not write the data including the bit address with the extended recipe 
     function. If such writing is made, a communication error may occur.
  <Mitsubishi Electric Corporation Q/QnA Series Ethernet>
   - The project file created in V4.08 may terminate forcefully,
     when opening it with the GP-Pro EX that uses the communication driver
     V1.15.07 or earlier.
     To avoid this situation, select the [Multiple CPU system] check box
     in the [Individual Device Settings].
  <Mitsubishi Electric Co., Ltd QnA  Series CPU Direct>
   - When starting the HMI, sometimes a communication error displayed only once.
  <ODVA DeviceNet Slave>
   - Do not input 32 or more characters for the device address in Address Input 
     of Device Monitor.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Tag information allocated to I/O units may not be imported normally.
     If this phenomenon occurs, edit the data with the Editor manually.
  <Siemens AG>
  <PROFIBUS International>
   - When bit read/write for two or more points is performed to 
     a bit-accessible word device or word type tag, an address other than 
     the specified address may be read/written.
  <SIMATIC S5 3964(R)>
  <SIMATIC S7 3964(R)/RK512>
   - When Gateway Mode on the GP-4G01, occasionally a response error occurs 
     on the HMI.
  <KEYENCE Corporation KV-700 - 8000 SIO>
   - In Gateway Mode on the GP-4G01, Pass-Through function on HMI
     sometimes fail.
  <Pass-through Function>
   - The pass-through function cannot be used when WinGP and IIS FTP servers are
     used at the same time.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - To import tags from TwinCAT3, use TwinCAT3 tag data output from TwinCAT 3.1
     Version 3.1.4012.0 or earlier.
  <JTEKT Corporation TOYOPUC CMP-LINK Ethernet>
   - When the device/PLC was started after starting the HMI, communication 
     fails sometimes.

 2-4 WinGP
  <Function>
   - The buzzer of WinGP does not sound in PS-4700 (Z510).
  <File Manager>
   - When the File Manager displays a folder path and data in that folder is
     updated, the folder path reverts to the default path.
  <Transfer Tool>
   - When using the USB transfer cable (CA3-USBCB-01) to get display unit 
     information, the screen list may not be available. You can add a base 
     screen to make the screen list visible.
   - When transferring to WinGP 4.09.200 or later, do not use GP-Pro EX versions
     before 4.00.000.
  <Offline>
   - When using Window 7 or later as the operating system,
     you cannot remove hardware while offline.
     When detaching a storage device from this product, 
     use the Windows Safely Remove Hardware tool.
  <Script>
   - The _FileCopy parameter of the script, except for Japanese operating
     systems, you cannot use functions set up with Japanese characters
     in the path.
  <Key code>
   - For PC/AT and IPC, if project data is downgraded to before 
     GP-Pro EX V4.09.120, the WinGP key code has to be re-entered.
   - Due to WinGP security enhancements, the key code is cleared when the system
     version is upgraded. Please set the key code again.
  <Others>
   - After installing Windows operating system and WinGP, then maximizing
     WinGP, the display color of OS may be changed to 256 color.
   - Sometimes a shield icon appeared on the bottom-right corner of the WinGP 
     icon.
   - When installing WinGP V4.09.300 or later on SP-5B40/SP-5B41, install to the
     folder C:\Pro-face\WinGP. If you install to any other folder, the HMI
     run time will not start up from Launcher on SP-5B40/SP-5B41.
   - When WinGP is installed in any drive other than C drive, when you uninstall
     sometimes an error occurs.

 2-5 Pro-face Remote HMI Server
   - In Windows 8 / 8.1 / 10, application distribution fails to correctly
     display distributed screens of Excel 2013 on the client.
     To distribute Excel 2013 screens, use desktop distribution.
   - When the Remote HMI Client is configured to connect automatically, 
     the connection dialog box may repeatedly show and hide.
   - When a screen from the screen editor is distributed and operated from 
     a Remote HMI Client, on the rare occasion the Part Settings dialog box 
     would become corrupted.
     Work with the screen editor from the server.
   - Distributing Remote HMI Server itself with application distribution is 
     restricted. When distributing the Remote HMI Server application, consider 
     using desktop distribution.
   - When using an application that is running with administrator privileges on
     the RemoteHMIServer, start and operate RemoteHMIServer with administrator 
     privileges.

(3) When Serial No. and License Key Code are not input
   - Project data cannot be transferred to the operation panels
     (except for GP4100 series, IPCs and PC-ATs (Used WinGP)).
   - Transfer using the Transfer Tool is not available for WinGP. However, using
     ProjectCopy, you can copy screen data and get it to work.
     To use ProjectCopy, click [Start]-[All Programs]-[Pro-face]-[WinGP]-
     [ProjectCopy] on the Windows desktop screen.
     However, note that ProjectCopy cannot be used in the following cases:
     - When system data has not been transferred
     - When system data has been changed
       WinGP automatically stops after three hours of continuous operation.
      * It is possible to input the serial No. and the license key code after
        installation of the software. Start the product and go to [Help]-[Enter
        Key Code].

(4) Installation and Uninstallation
 4-1 Installation
   - Be sure to quit all application programs and close (disable) all resident
     programs such as virus detection software before installing the software.
   - Install this software using a user account with Administrator privileges.
   - Refer to our support site "Otasuke Pro!"(https://www.pro-face.com/otasuke/)
     for the operating environment.
   - By inserting a disk into the DVD drive, Setup window will appear.
     If the Setup window does not appear, click the desktop's [Start] button
     and then click [Run]. In the text input field, enter [D:\ProEX_Setup.exe]
     and click [OK].
     (As for the "D:\" part, enter your DVD drive name.)
       * Some of the tools require a license.
       In cases below, USB transfer cables may not be recognized correctly:
       - When you installed the software with a USB transfer cable connected
       - When you started using the software without restarting your computer
   - <How to install ".NET Framework3.5" (or 2.0, 3.0) when not connected to 
      Internet>
     1)Insert the Windows installation media.
       If you do not have the Windows installation media, contact the PC
       manufacturer.
     2)Select "Open command prompt as administrator" on the Explorer.
     3)Execute the following command at the Command Prompt.
       Dism /online /enable-feature /featurename:NetFx3 /All /Source:x:\sources
       \sxs /LimitAccess 
       *) For x:, specify the drive letter of Windows installation media or the
          DVD drive.
   - If .Net Framework 3.5SP1, 4.8 or later is not installed, the .Net Framework
     installer will run.
   - During installation of .Net Framework, restarting of the computer may be 
     required.

 4-2 Uninstallation
     Click [Start] - [***] - [Uninstall]. (Insert the product name and version 
     in ***)
     Delete other tools from [Control Panel] - [Programs and Features].
     However, as project files, package files, exported files, and other files 
     either created or exported after installing are not deleted, we recommend 
     carefully managing these files or deleting them.

(5) User Registration
   Please register your software to help us offer enhanced customer support.
   Since you can confirm the registered information at anytime once you
   register, you do not have to worry even if you lose it. To register, insert
   a DVD into the DVD drive, select the User Registration menu in the Set Up
   Menu screen and complete the online Software User Registration. You can also
   register after installation by starting the product and registering from
   [Help]-[Online User Registration].

(6) Manuals
   To view PDF manuals, the Adobe Reader software has to be installed on your
   computer. Start the product and select [Manual] from the [Help(H)] menu.
   To view only the manuals, select [Start]-[All Programs]-[Pro-face]-[***]
   -[Manual].("***" represents the product name and version.)
   Some manuals need to be downloaded from our support site "Otasuke Pro!".

(7) Fixed Issues
 = V4.09.500 =====
 7-1 Editor
   <Image Font>
   - The display quality of the Image Font has been improved.
   <Changing Models>
   - When Convert Resolution was enabled and then the model was changed, the 
     position of grouped parts did not convert properly. 
   <Data Display>
   - Sometimes the Data Display was not placed as defined when drawing the Data
     Display by specifying its size.
   <Function Expansion Memory Settings>
   - When changing to a model that did not support the function expansion 
     memory, sometimes the [Function Expansion Memory Settings] did not change
     to [None].
   <Enhanced Recipes>
   - Importing edited CSV files sometimes caused GP-Pro EX to exit unexpectedly.
   <Image Registration>
   - When using ST-6300TA, an error occurred when reducing the color of a 
     registered image to 262,144 colors.
   <CSV Data Transfer>
   - On opening a project converted with the Project Converter, sometimes an 
     unexpected warning regarding CSV data transfer settings was displayed.
   <Modem>
   - An error check was not performed for some of the display units that did not
     support a modem.
   <Operation Lock>
   - The error message (1515) was improved. 
   <Window Parts>
   - The name of a property in the Window part was corrected.
   <Version Information>
   - An item name was corrected to "Serial Number".
   <Backup File>
   - Launching GP-Pro EX while transferring a project sometimes caused the 
     display of the restore projects dialog box even though there was no 
     project to restore.
   <Transfer Tool>
   - When transferring a project when the transfer mode was set to [Automatic]
     or [All], on the rare occasion, the Transfer Tool exited unexpectedly.
   <Transfer Project>
   - Sometimes SRAM was not cleared when transferring a project.
   - Improved the error message that displays when transferring if the display
     unit is not ready for a project transfer.
   <Receive Project>
   - When an invalid path or a file that cannot be saved is specified, 
     the Receive Project operation will not run.
   <GP-4000 Series (excluding GP4000M, GP410* Series) and GP-4G01>
   - Sometimes could not transfer a project to the display unit with V4.06.300
     or earlier.
   <Simulation>
   - On the rare occasion, simulation did not start properly.

 7-2 Display Unit
   <WinGP>
   - On the very rare occasion, WinGP exited unexpectedly when writing data to
     the COM port.
   - On Windows 10, memory usage kept increasing if you continually executed 
     [Start Application].
   - Vulnerabilities have been addressed.
   - Sometimes changes to settings in offline mode were not applied.
   - After saving changes in offline mode or transferring projects, sometimes 
     WinGP did not restart.
   - On starting WinGP, sometimes it displayed an error and could not start.
   - A system error sometimes displayed during WinGP execution if all ports 
     were closed in the Port Control settings and the Pro-face Remote HMI 
     feature was enabled in the Remote Viewer settings.
   <WinGP SDK>
   - Vulnerabilities in the tool have been addressed. [CVE-2023-3953]
   <Script>
   - On the rare occasion, when using D-script, WinGP ended unexpectedly 
     immediately after startup.
   - When using ST6000/STM6000 Series, COM communication did not work properly.
   <Offline>
   - On Windows 7, setting the Connection Key sometimes caused WinGP to stop 
     unexpectedly.
   - When using the ST-6200W or STM6000 Series, performing the COM1 Check 
     (COM1/RS232C) sometimes resulted in "NG".
   - Sometimes the [Check COM1/COM2/LAN] function in the [Maintenance Menu] did
     not work properly.
   <Logic Scan Timer>
   - At WinGP startup, sometimes the logic timer did not work correctly.
   <Logic>
   - If the display unit was turned off while executing instructions, sometimes
     the instructions could not be executed again.
   <ST6000W Series>
   - Transfer was not possible when the RAAA203 error occurred.
   - Unexpected behavior occurred when touching the top-right corner.
   <ST6000/STM6000 Series>
   - The values of #L_ScanTime and #L_AddressRefreshTime were invalid on the 
     rare occasion.
   <Alarm>
   - The date values of trigger, acknowledge, and recovery were sometimes
     invalid.
   <Alarm Banner>
   - The date values in the print data were sometimes invalid.
   <SRAM Auto Backup>
   - The date values in the backup data were sometimes invalid.
   <Operation Log>
   - When external storage was not attached and the Save in CSV operation was 
     performed, sometimes the performance of the display unit decreased.
   - Sometimes invalid data was generated in the CSV file.
   <E-mail Function>
   - If there was invalid text in an e-mail address, sometimes WinGP exited 
     unexpectedly on sending an e-mail.
   - Addressed a vulnerability in the library used by the E-mail function.
     [CVE-2022-27778, CVE-2022-22576, VE-2022-27782, CVE-2022-27775, 
     CVE-2022-27779, CVE-2022-27781, CVE-2022-2778, CVE-2022-27776, 
     CVE-2022-30115, CVE-2022-27774]
   <Sound>
   - On the rare occasion, changing the LS2071 sound volume immediately after 
     starting up the display unit caused the display unit to exit unexpectedly.
   <Memory Loader>
   - After transferring a project with the Memory Loader to the STM6000 Series,
     sometimes it did not start properly.
   <GP-Viewer EX>
   - Vulnerabilities have been addressed.
   - Sometimes GP-ViewerEX stopped unexpectedly after clicking the [START 
     CONNECTION] button. 
   - If an anti-virus software was running on the same machine as GP-Viewer EX,
     sometimes it stopped unexpectedly after clicking the [START CONNECTION] 
     button. 

 7-3 Device/PLC
   <Siemens AG TIA Portal Ethernet>
   - Opening a project file or starting simulation sometimes took a long time.
   - The display unit sometimes stopped unexpectedly when switching to offline 
     mode.
   - If WinGP was started without connecting a device/PLC, entering offline mode
     or transfer mode sometimes caused WinGP to exit unexpectedly.
   <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When a series other than the default series was selected, the offline
     screen sometimes displayed the incorrect series.
   <Mitsubishi Electric Corporation Q Series CPU Direct>
   - Sometimes the SW device was inaccessible in communication driver versions
     1.19.19 or later.
   <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Downloading from the ladder software to the PLC while the PLC communicating
     with the HMI sometimes caused a communication error that the HMI could not 
     recover from.
   <Rockwell Automation, Inc. EtherNet/IP>
   - Importing a Micro800 series CSV file failed sometimes.
   <ODVA EtherNet/IP Explicit Messaging>
   - When using "Custom Explicit Messaging", sometimes the display unit stopped
     unexpectedly.
   - When there were multiple nodes set up with communication driver V1.15.19 or
     later, sometimes a communication error occurred.
   <ODVA EtherNet/IP Target>
   - When using ST6000 Series, communication was not possible through the LAN2
     port.
   <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - When importing XML, sometimes GP-Pro EX  exited unexpectedly.
   - Editing the structure of structured variables sometimes caused GP-Pro EX
     to exit unexpectedly.
   - Communication sometimes slowed when using array variables.
   - In a project with multiple scopes, reimporting tags sometimes caused 
     variables in the project to appear as "Undefined."
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Editing the structure of structured variables sometimes caused GP-Pro EX
     to exit unexpectedly.

 = V4.09.450 =====
 7-1 Editor
   <Screen Editor>
   - Without a project open, GP-Pro EX exited unexpectedly sometimes when
     starting the Transfer Tool.
   - GP-Pro EX can now run with Windows FIPS enabled.
   <Simulation>
   - If you started a second simulator while the first simulator was still
     running, sometimes a warning displayed and the simulator would not refresh.
   <Enhanced Recipe>
   - GP-Pro EX exited unexpectedly sometimes when a specific operation was run
     on the Enhanced Recipe Group screen.
   <GP-4000 Series (excluding GP4000M, GP410* Series) and GP-4G01>
   - Sometimes could not transfer a project to the display unit with V4.06.300
     or earlier.
   <Transfer Tool>
   - When transferring a project that was blocked by a firewall, sometimes the 
     project file on the destination display unit was deleted.
   - Sometimes received projects could not open in GP-Pro EX.

 7-2 Display Unit
   <ST6000/STM6000 Series>
   - Sometimes communication was not possible with a specific IP address 
     (192.168.2.100).
   - FTP client sometimes could not connect via the LAN2 port.
   <ST6000 Series>
   - Receiving a project failed sometimes.
   <STM6000 Series>
   - The LCD sometimes flickered depending on the project.
   <WinGP>
   - When WinGP was installed on a drive other than the C drive and the C
     drive's write filter was on, sometimes could not transfer a project to 
     WinGP.
   - When transferring a project with the Transfer Tool, sometimes the system
     keypad size was not updated.
   - There was an issue where memory consumption kept increasing when running
     [Start Application].
   <LT4000 Series>
   - The operating system has been updated to address a vulnerability.
     [CVE-2020-35198, CVE-2020-28895]
   - The LT4000 series was vulnerable to DOS attacks which sometimes caused the
     display unit to freeze.
   <SRAM Backup>
   - Sometimes the SRAM Auto Backup function did not work on the SP-5B00, 
     SP-5B10, and SP-5B90.
   <Port Control>
   - When the port for SiteManager Embedded (Pro-face Connect) was closed and
     you used the offline menu's SiteManager Embedded screen to check the 
     status, communication was sometimes enabled after coming back online.
   <OS Recovery Tool>
   - The OS Recovery Tool for GP3000 Series sometimes would not start.

 7-3 Device/PLC
   <Schneider Electric SA MODBUS SIO Master>
   <Schneider Electric SA MODBUS TCP Master>
   - Downloading from the ladder software to the PLC while the PLC is in 
     communication with the HMI would sometimes cause a communication error that
     the HMI could not recover from.
   <Schneider Electric SA MODBUS Slave>
   - Fixed an issue that occurred with a bit-write operation to a discrete
     device.
   <Mitsubishi Electric Co., iQ-R/F Ethernet (SLMP Client)>
   - Sometimes some of the tags did not display in the tag selection screen.
   <Omron Corporation CS/CJ/NJ Series EtherNet/IP>
   - Sometimes start up on the HMI was slow.
   <Siemens AG TIA Portal Ethernet>
   - GP-Pro EX sometimes exited unexpectedly when importing a TIA Portal project
     file.
   - Some tags sometimes did not display in the tag selection screen.
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Some tags sometimes did not display in the tag selection screen.
   <ODVA EtherNet/IP Target>
   - If you performed a bit write to an input device from the logic function or
     the device monitor, values did not update properly sometimes.
   - Implicit communication with the originator was sometimes not possible.
   - In the create EDS file function, device settings for the 55th node and
     greater were not created properly sometimes.
   <YE DIGITAL Corporation MMCloud TCP Client>
   - When the [Clock Update Setting] was enabled, starting the HMI without the
     device/PLC connected sometimes caused the HMI to halt.
   <SAE International J1939>
   - Fixed an issue where data was truncated data when the SPN data length and
     display length did not match.
   <Pass-Through>
   - When using the Pass-Through function, closing any of the ports sometimes
     caused a communication error or forced the display unit to halt.
   <Port control>
   - If one of the ports was closed, UDP communication divided into multiple
     packets could not be received properly on any of the UDP ports.
     - Yaskawa Electric Corporation MP Ethernet/MECHATROLINK PLC/device data 
       transfer function
     - KEYENCE Corporation KV-700 - 8000 Ethernet

 7-4 Installer
   - GP-ProEX Installation was not possible to specific folders.

 = V4.09.400 =====
 7-1 Editor
   <Screen Editor>
   - Enhanced model names and notation of model settings in the screen editor.
   - Enhanced checking when opening the manual from the screen editor.
   <D-Script>
   - When the screen editor language was [Japanese], some of the settings 
     dialog boxes were displayed from right to left.
   <Transfer Tool>
   - When [Receive Project] was executed on ST6000 Series or STM6000 Series 
     models set up with a start screen, sometimes the project failed to be 
     received.

 7-2 Display Unit
   <ST6000 Series>
   - The product sometimes could not start up.
   - The Memory Loader could not be started from the forced transfer screen.
   - Sometimes VCC could not be output on the COM1 port.
   - Drawings on the screen display was sometimes out of alignment.
   - The screen sometimes flickered when the screen display was refreshed.
   <ST6000 Series / STM6000 Series>
   - Drawing a tank graph on a base screen and then transferring sometimes 
     caused a line to appear on the border of the base screen.
   - Buttons in the force transfer screen sometimes shifted to an invalid 
     position.
   - Addressed an issue where the EZ tower light failed to work properly.
   - If you ran an operation that interrupted the transfer of the system (such 
     as a system update or forced transfer), sometimes the system could not be 
     restored on the next automatic transfer.
   <Offline>
   - Sometimes you could not change the Web Server settings.
   - After initializing backup memory (SRAM), sometimes the amount of free 
     space showed an abnormal value.
   - In the security settings, sometimes the user ID could not be edited.
   - Changing any of the settings and then saving sometimes caused the RAAA144 
     error.
   <E-mail>
   - While sending e-mail, entering offline mode or transferring screens 
     sometimes caused the display unit to freeze.
   - Addressed a vulnerability in the library used by E-mail. 
     [CVE-2018-14618, CVE-2018-16842, CVE-2020-8286, CVE-2020-8285, 
     CVE-2020-8231, CVE-2018-16890, CVE-2021-22923]
   <Operation Log>
   - In the [Operation Log] settings, when the [Operation When Space is 
     Limited] property was set to [Stop Operation Log], saving to a SD card or 
     USB memory where capacity was insufficient sometimes created a 0 KB file.
   - In the [Operation Log] settings, when the [Operation When Space is 
     Limited] property was set to [First In First Out Data Queue], saving to a 
     SD card or USB memory where capacity was insufficient, the application 
     sometimes mistakenly deleted the latest data file.
   <Logic>
   - In rare cases, retentive bit variable values disappeared from SRAM.
   <WinGP>
   - When transfer was executed to WinGP which was started with administrator 
     rights from the [Transfer] - [Transfer Project File] commands in the 
     offline menu, sometimes the WinGP version could not be updated.
   - As the USB key for WinGP PC/AT was not always recognized and WinGP 
     sometimes started in trial mode, the driver for the USB key has been 
     updated.
   - If you installed the operating system and WinGP on a PS6000 model that 
     comes without an operating system, WinGP started up as a trial version.
   - In Windows10, on returning from HORM sometimes a system error occurred.
   <WinGP SDK>
   - On returning from HORM, sometimes a system error occurred.
   <Device/PLC Data Transfer>
   - Sometimes device/PLC data transfer operations did not work.
   <Security>
   - DOS attacks could disable the display unit.
   <GP-4000 Series (excluding GP4000M and GP410* Series) and GP-4G01>
   - The operating system has been updated to address a vulnerability.
     [CVE-2016-20009, CVE-2020-35198, CVE-2020-28895]
     As a result, support for the following function has ended.
     - Remote PC Access function
   - When a large number of drivers were set up, sometimes the transfer 
     operation could not be run.

 7-3 Device/PLC
   <Siemens AG TIA Portal Ethernet>
   - In the [Input Address] dialog box, sometimes some of the tags did not 
     appear.
   - When copying between projects, tags set up on the screen sometimes became 
     "Undefined".
   <Siemens AG SIMATIC S7 Ethernet>
   - When importing tags, using the filter function could cause GP-Pro EX to 
     halt.
   <Siemens AG SIMATIC S7 MPI  Direct>
   - When used on ST6000 Series, sometimes communication errors occurred.
   <Rockwell Automation, Inc. EtherNet/IP>
   - Sometimes specific tags could not be imported.
   - When using string variables, sometimes the HMI halted unexpectedly.
   <KEYENCE Corporation KV-700 - 8000 Ethernet>
   - A communication error sometimes occurred with the existing system of the 
     GP-4G01.
   - When using the GP-4311HT, sometimes the [Individual Device Settings] user 
     interface did not display properly.
   - In the HMI's offline screen, sometimes the series name did not display.
   <Omron Corporation CS/CJ/NJ Series EtherNet/IP>
   - HMI startup sometimes became slower.
   - When using the Tag import function with NJ Series, sometimes the names of 
     imported variables that used specific text strings were garbled.
   <Omron Corporation CS/CJ Series Ethernet>
   - When starting the HMI, sometimes a communication error displayed only once.
   <Omron Corporation CS/CJ Series Ethernet>
   - When the [Clock Update Settings] was enabled, starting the HMI without the
     device/PLC connected sometimes caused the HMI to halt.
   <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - When structured variables mixed upper and lowercase characters in their 
     names, on using the Tag import operation sometimes variables on the screen
     became "Undefined".
   - Re-importing tags sometimes caused variables in the project to become 
     "Undefined".
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Even though you may have executed the Tag table delete operation, 
     sometimes nothing was deleted.
   <Mitsubishi Electric Corporation FX Series Computer Link>
   <Mitsubishi Electric Corporation FX Series CPU Direct>
   <Mitsubishi Electric Corporation Q/QnA Series Ethernet>
   <Omron Corporation CS/CJ Series Ethernet>
   <Panasonic Electric Works SUNX Co., Ltd. FP Series Computer Link SIO>
   <Panasonic Electric Works SUNX Co., Ltd. MEWTOCOL-COM Ethernet>
   - When the [Clock Update Setting] was enabled, starting the HMI without the 
     device/PLC connected sometimes caused the HMI to halt.
   <SAE International J1939>
   - Sometimes STRING type tags could not be imported.
   - With specific PGN, sometimes could not read correct data.
   <LS ELECTRIC XGT/XGB Series Fenet>
   - When using V1.16.05, sometimes a communication error occurred.
   <Hitachi, Ltd. S10 Series SIO>
   - When used on ST6000/STM6000 Series, write operations to the PLC sometimes 
     caused a timeout error.

 = V4.09.350 =====
 7-1 Editor
   <D-Script>
   - When an offset address was used in an [if] statement, the screen editing 
     software was unable to detect syntax that required a warning.
   <Text Table>
   - Pasting a huge amount of text in a text box of the Text Table sometimes 
     caused the application to exit unexpectedly.
   <ST6000 Series>
   - Notation of model name has changed.
     From ST-6*00W, to ST-6*00WA.
     (Offline, model names do not include the hyphen)
   <WinGP>
   - Sometimes a tag's device address set in [Display Unit] - [WinGP Settings] -
     [Historical Data Retentive Settings] - [Control Bit Address] displayed as 
     Undefined.
   - From the Transfer Tool, if you executed [Display Unit Information] after 
     the offline menu's [Transfer Project File] operation was executed, 
     sometimes WinGP restarted two times.
   <Transfer Screen>
   - Sometimes GP-Pro EX was unable to open the project of screen data that was
     received.
   <Version Reverter>
   - If the project file's extension used uppercase characters (PRX), the file 
     was determined to be an invalid file. Additionally, a similar problem 
     occurred when you used the editor to save the project as a previous 
     version.

 7-2 Display Unit
   <Memory Loader>
   - On some models, the connection key could not be applied to the display 
     unit.
   - When using Memory Loader to upload from the SP-5B10/00, and then the backup
     data was downloaded to a different display unit, sometimes text in the 
     offline menu did not appear anymore.
   <Offline>
   - Sometimes WinGP/GP-Viewer/Remote PC Access key codes were not saved.
   <Sampling>
   - When saving sampled data to CSV format, sometimes there was a discrepancy
     in the time in the CSV data.
   <E-mail>
   - If you specified multiple addresses in the subject or body in E-mail 
     settings, sometimes getting address values did not work properly.
   <ST6000 Series>
   - Sometimes an error occurred in the clock settings.
   - The error message that displays when starting the system has been improved.
   - Sometimes PLC communication would fail after transferring via Memory 
     Loader.
   - Sometimes communication on the LAN1 port stopped after unplugging the cable
     connected to the LAN2 port.
   <GP4000M Series>
   - Sometimes could not start up properly.
   <WinGP>
   - After transferring a project, sometimes WinGP exited unexpectedly.
   - After transferring a project, sometimes WinGP did not start up.
   - WinGP was unable to use the Japanese Front End Processor (FEP).
   - The error message that appears when starting the Trial Version has been
     changed on some IPC models. The message now prompts you to apply the latest
     Microsoft operating system patch.
   - When installed in the "Program Files (x86)" folder, and executed with user
     rights, sometimes its System menu displayed [Memory Loader].
   - When installed in the "Program Files (x86)" folder and running transfer for
     the very first time, instead of the WinGP transfer progress screen, 
     sometimes a grayed out WinGP screen had displayed.
   - WinGP sometimes became unresponsive after transferring a project with an
     error and then transferring that project again.
   - When WinGP was started (with Administrator rights) from the offline menu
     using the [Transfer Project File] command, and from the Transfer Tool 
     [Transfer Project] -  [Automatic Transfer] was executed, WinGP restarted 
     and sometimes entered Transfer Mode.
   - Sometimes memory usage continually increased after executing [Start 
     Application].
   <WinGP API Communication>
   - When Windows was started by HORM, the WinGP API did not work under certain
     conditions.
   <GP-Viewer EX/Simulation>
   - A vulnerability issue has been addressed.
   <ProjectCopy>
   - When WinGP and project data used different image fonts and you executed
     project copy, copying failed but there was no indication of a problem.
   <Others>
   - When Pro-Server EX connected to PS6000 series, the model name did not 
     display correctly.
   <Function>
   - Addressed operating system vulnerability issues on the SP-5000 Series and 
     ST6000 Series. [CVE-2020-35198, CVE-2020-28895]

 7-3 Device/PLC
   <ST6000 Series>
   - When communication drivers were set to both COM1 and COM2, sometimes VCC 
     was not output even though the VCC setting on COM1 was enabled.
   <Mitsubishi Electric Corporation Q/QnA Series Ethernet>
   - When performing ASCII communication with iQ-F Series over TCP/IP, sometimes
     a communication error occurred.
   <Mitsubishi Electric Corporation FX Series CPU Direct>
   - When using gateway mode on the GP-4G01, on the rare occasion a response 
     error occurred on the HMI.
   <Omron Corporation CS/CJ Series HOST Link>
   - Communication suddenly stopped on the rare occasion.
   <Siemens AG TIA Portal Ethernet>
   - Tag names are now added to error messages.

 = V4.09.300 =====
 7-1 Editor
   <Transfer Tool>
   - When running a trial version of WinGP, sometimes connection did not work 
     with the [CF/SD Card Connection] command.
   - Sometimes transfer settings were not carried over when upgrading versions.
   - Receiving project files that used image fonts sometimes failed.
   <Text Table>
   - When pasting multiple cells at one time, sometimes a character overflow 
     warning appeared and the paste operation could not be completed.
   <Memory Loader>
   - After using the Memory Loader to transfer a project, sometimes the 
     SiteManager button did not display.
   - On the SP-5B40 and SP-5B41, sometimes the Memory Loader did not start up.
   <Copy From Another Project>
   - Sometimes screen headers and footers in the source project were duplicated 
     and, as a result, some screen headers and footers were not copied to the 
     target project.
   <Sampling>
   - On the [Display/CSV Save] tab, sometimes you could not scroll all the way 
     down and a part of some items were hidden from view.
   <E-mail>
   - As an error did not occur when the E-mail feature was enabled and extended 
     settings were set up for the alarm,  this combination of features behaved 
     as if they were enabled. 
   <Project Comparison Tool>
   - When comparing projects that used image fonts, sometimes unnecessary error 
     messages displayed.

 7-2 Display Unit
   <ST6000 Series>
   - The Memory Loader sometimes caused a system error.
   - When a serial communication mode not supported by hardware was configured, 
     the product could not start up.
   - In offline mode, unsupported options were available.
   - Under specific conditions, removal of the battery prevented the product 
     from starting up.
   - The file manager timestamp on the ST6000 series was off by 1 hour.
   <Offline>
   - Sometimes user memory initialization failed.
   <Change Screen>
   - Quickly changing screens sometimes caused a system error.
   <Pro-face Remote HMI>
   - On clients running in asynchronous mode, sometimes Sampling Display parts 
     stopped updating their display.
   - On the GP4000M Series, sometimes screen distribution failed.
   <Touch Operation>
   - When using a combination of the SP-5B10/00 and SP5XX0TP (analog resistive 
     multi-touch) together, sometimes 3-point touches caused abnormal 
     operations.
   <Transfer Project>
   - From the Transfer Tool, running [Display Unit Information] sometimes caused
     the HMI to exit unexpectedly.
   <COM Communication>
   - On the GP4000M series, RS-422/485 (2-wire) communication on the COM1 port 
     sometimes caused a communication error.
   <RGB Unit>
   - When an RGB unit was connected to GP3000 Series, sometimes the initial 
     colors were different.
   <WinGP>
   - Fixed a vulnerability issue.

 7-3 Device/PLC
   <Rockwell Automation, Inc. - EtherNet/IP>
   - Fixed an issue where strings could not be written to a STRING data type 
     with an undefined data length when [Control/Compact/Flex Logix Series 
     Native] was selected, 

 7-4 Installer
   <Security Updates>
   - The following security vulnerabilities have been addressed in this release:
     CVE List (CVE-2021-22775)

 = V4.09.250 =====
 7-1 Editor
   <ST6000 Series>
   - Selecting [Use FTP Transfer] in a sampling group displayed an error and 
     the setting could not be enabled.
   <Transfer Tool>
   - With a LAN Transfer, when automatically searching for a transfer
     destination, the tool sometimes exited unexpectedly.
   - Sometimes the Transfer Settings dialog box did not display properly.
   - With slow communication lines such as 3G, sometimes you were unable to send
     a project using Pro-face Connect.
   - Sending projects, receiving projects, and other transfer operations
     sometimes caused the transfer process to fail when the [Communication Port
     Settings] was set to [Modem] or [COM].
   <Simulation>
   - With some models, sometimes simulation failed to run.
   <Online Edit>
   - Online editing failed when in the [Screen Capture] settings, [Save in] was
     set to [FTP Server].
   <Logic>
   - Running logic in IL display sometimes caused the application to exit
     unexpectedly.
   <Project Comparison Tool>
   - Switch/Lamp comparisons sometimes showed "Different" even though they were
     the same.

 7-2 Display Unit
   <Startup>
   - Entering offline mode by touching the top-right corner (or top-left corner)
     of the screen at startup on the ST6000 Series was not possible."
   <COM port communication>
   - Sending and receiving data on the COM port of a ST6000 Series unit 
     sometimes caused a receive error.
   <E-mail>
   - Continuously sending e-mails sometimes caused the screen to freeze.
   <Enhanced Recipes>
   - While receiving or importing recipe data, entering offline mode or transfer
     mode sometimes caused inconsistencies in the recipe data.
   <Offline - Check Touch Panel>
   - A portion of the END button did not respond to touch.
   <Logic>
   - In a rare case, at a certain moment between when a display unit was turned
     ON and when the initial screen was displayed, turning off the power caused
     retentive variable values in SRAM to be erased.
   <RGB Unit>
   - When an RGB unit was connected to GP4521T and GP4621T, sometimes the
     initial values differed.
   <Screen Transfer>
   - Sometimes SRAM was not initialized by the automatic transfer operation.
   - Sometimes the CF/SD card data did not display when connecting to a CF/SD
     card.
   - While displaying the connection key settings screen on the display unit,
     the Transfer Tool's automatic search feature could not detect the display
     unit.
   <WinGP>
   - An error message sometimes appeared when exiting WinGP.
   - Using the Transfer Tool to get "Display Unit Information" sometimes caused
     the application to exit unexpectedly.
   <Ethernet Multilink>
   - When acting as a client or server, the display unit sometimes stopped 
     working.

 7-3 Device/PLC
   <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - ST6000 Series did not start up.
   <Conversion Adapter>
   - On the 4311HT, an RAAA158 error sometimes displayed when using the COM1
     port with a conversion adapter for RS-422/485 (2 wire) communication.

 = V4.09.200 =====
 7-1 Editor
   <Device/PLC Settings>
   - On display units that do not support Crouzet external devices, sometimes 
     you could still select a Crouzet external device.
   <Alarm>
   - When the alarm's send E-mail function was enabled, sometimes opening 
     an Alarm part's properties caused the application to exit unexpectedly.
   <Simulation>
   - When multiple operands were set in a function block, sometimes the operands
     displayed incorrect variable names.
   <File Manager>
   - When opening a project from a previous version, sometimes 
     the [File Manager] button did not display.
   <SRAM Information>
   - When backup of internal devices was enabled, the size of the internal 
     device in the SRAM information appeared greater than it actually was.
   <Transfer Tool>
   - Sometimes file information did not display in the confirmation dialog box 
     for the Memory Loader, or in the file selection dialog box when creating 
     a project.
   - From [Display Unit Information] > [Display Unit], confirming GP-Viewer EX
     key code input sometimes caused the application to exit unexpectedly.
   <WinGP Settings>
   - For IPC models, after saving the project, sometimes the [Historical data]
     > [Save in] setting changed from [SRAM] to [Folder].

 7-2 Display Unit
   <WinGP>
   - Entering offline mode sometimes caused WinGP to exit unexpectedly.
   - Fix privilege escalation vulnerability in the panel operating 
     environment.  [CVE-2020-7544]
     To apply this fix, re-install WinGP with the WinGP installer.
   <E-mail>
   - When sending an email with device addresses or symbol variables specified 
     in the body, sometimes the values were not reflected properly.
   <Offline>
   - On some models of SP5000 Open boxes , the content of "Display Colors :" 
     was sometimes displayed incorrectly.
   <Transfer Project>
   - After transferring a project on the GP4000 Series (excluding GP4100 
     Series), sometimes it did not startup properly.
   <Memory Loader>
   - After downloading to the GP4000 Series (excluding GP4100 Series), sometimes
     it did not startup properly.
   <Ethernet Communication>
   - On LT4000 Series and GP4000 Series (excluding GP4000M and GP410* Series),
     if the external device repeatedly disconnected then reconnected during TCP 
     communication, sometimes normal communication could not be restored.
   <I/O Driver>
   - The values set in #L_IOStatus and #L_IOFault when an error occurred, were 
     sometimes erased before the error was restored.

 7-3 Device/PLC
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Sometimes importing a large number of variables caused GP-Pro EX to exit 
     unexpectedly.

 = V4.09.150 =====
 7-1 Editor
   <External Device Settings>
   - When using the GP4000 Series Hand-held display unit, some of the external 
     devices could not be set up.
   <Starting the Application>
   - Sometimes multiple versions of the editor with incompatible data could be 
     started at the same time.
   <Time Schedule>
   - When setting Operation Mode to Word Set 8, you were unable to save the data
     format, which became fixed to Unsigned Decimal.
   <Print>
   - Printing with a language setting other than English sometimes caused 
     problems with the layout, causing the output of a blank page.
   <Copy Objects From Other Projects>
   - When copying objects from other projects, if symbol addresses were used 
     sometimes they could not be converted properly.
   <Transfer Tool>
   - If a language other than Japanese or English was selected, could not 
     transfer SP-5B40 and SP-5B41 projects.
   - When the operating system language and GP-Pro EX language did not match, 
     some characters did not display properly even though you changed the 
     Windows system locale to match the GP-Pro EX language.
   - When only the Transfer Tool was installed, 
     selecting [Display Unit Information] - [Display Unit] sometimes caused 
     the Transfer Tool to exit unexpectedly.
   <Simulation>
   - Running simulation with a CANopen I/O driver instruction on a logic screen 
     caused simulation to exit unexpectedly.
   - In the Windows Display settings, changes to the Scale and layout could not 
     be applied to Simulation.

 7-2 Display Unit
   <Function>
   - On the GP-4201TM (Modular Type) and GP-4301TM (Modular Type) models, 
     a system error occurred occasionally during operation.
   <Clock Update Settings>
   - On the GP-4100 series (color model), even though 
     [Clock Update Settings] = [Enable], sometimes the clock data was not 
     reflected properly.
   <Banner Alarm>
   - Sometimes the [Banner Alarm] display speed increased.
   <WebConfig>
   - Ethernet settings sometimes displayed "Bad primary DNS address" and changes
     to settings did not save.
   <WinGP>
   - The start application feature sometimes worked only with C drive.
   - If you started the Memory Loader while WinGP was running, the Memory Loader
     sometimes could not appear in the forefront.

 7-3 Device/PLC
   <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - Sometimes you could not set up particular tags for parts on a screen.
   - On reimporting tags, sometimes variables used in the project appear 
     "Undefined."
   - When the names of structured elements start with "T_", sometimes the 
     structure was imported with an invalid element name and a communication 
     error would occur.
   - When importing a new tag, sometimes the Scope overwrite warning would 
     display.
   - When importing an EcoStruxure Machine Expert V1.2 xml project file with 
     Enable Direct I/O access enabled, sometimes most of the variables failed 
     to import.
   <Siemens AG TIA Portal Ethernet>
   - Importing particular tags sometimes caused GP-Pro EX to exit unexpectedly.
   - Sometimes importing tags of unsupported PLCs did not display an error.
   - Importing particular tags would sometimes fail.
   <Rockwell Automation, Inc. EtherNet/IP>
   - When an Extended Alarm used a tag that did not exist on the external 
     device, sometimes the error did not display.
   <Mitsubishi Electric Corporation iQ-R/F Ethernet (SLMP Client)>
   - When connecting to iQ-F series over the network, accessing the "Module 
     Access Device" sometimes caused the HMI to restart.
   <Fuji Electric Company, MICREX-SX Series Ethernet>
   - When running an error check on a project, sometimes the outer limits of 
     address ranges could not be detected properly.

 = V4.09.120 =====
 7-1 Editor
   <Enhanced Recipes>
   - When do not use map addresses was set, sorting the element list 
     by map addresses caused the editor to exit unexpectedly.
   <Data Display>
   - When a screen that included a data display part associated with 
     a date/time display address remained closed, changing external device 
     settings or converting a block of addresses did not function properly.
   <Security>
   - The display of passwords in the screen editor and project comparison 
     tool now uses asterisks "*".
   <Simulation>
   - In simulation, sometimes the [I/O View] settings were grayed out.
   <Security>
   - The display of passwords in the transfer tool now uses asterisks "*".
     [CVE-2020-7492]
   - Resolved a vulnerability in the key code.
 
 7-2 Display Unit
   <Alarm>
   - Sometimes the results from an alarm analysis did not appear on the 
     analysis list screen.
   <WinGP>
   - Sometimes WinGP did not start up if, in the E-mail settings, 
     the Attachment File Name Word Address specified a path length 
     that approached the maximum path length.
   <Features>
   - Resolved a vulnerability in the operating system on the LT4000 and 
     GP4000 series (excluding GP4000M and GP410* series). [CVE-2020-10664]
 
 7-3 Device/PLC
   <JTEKT Corporation TOYOPUC CMP-LINK Ethernet>
   - In 1:n communication, if the same IP address and port number was set 
     in multiple [Individual Device Settings], a connection open error was 
     detected by one device only.
   <Yaskawa Information Systems Co., Ltd | MMCloud TCP Client>
   - A project set up with a 32-bit INT type variable in the sampling 
     settings sometimes incorrectly detected a warning.
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Import failed sometimes when using a structure in another structure.
   <JTEKT Corporation TOYOPUC CMP-LINK SIO>
   - In 1:n communication, if the same [Station No.] was set in multiple 
     [Individual Device Settings], a connection open error was detected 
     by one device only.
 
 = V4.09.102 ===================================================================
 7-1 Editor
   <Editor>
   - The alarm could not be imported.

 7-2 Display Unit
   <WinGP>
   - Sometimes after automatic transferring an error displayed and the unit 
     did not start up.
   <Picture Display>
   - In WinGP (or Simulation), when the CF Image Display is selected on 
     the picture display and the Specification Method is set to the Address 
     and an attempt is made to display an image, sometimes caused the WinGP 
     to exit unexpectedly.
   <Other>
   - When the bar code reader is set on the SP-5700TP/5660TP/5600TP/5500TP, 
     sometimes the unit could not start up.

 = V4.09.100 ===================================================================
 7-1 Editor
   <Copy From Other Project>
   - The editor sometimes exited unexpectedly when copying from other projects,
      including the startup screen.
   <Workspace>
   - When using a Windows 8 or later operating system, depending on the zoom
     level, changing the width of windows in the workspace sometimes caused
     unnecessary lines to appear and shift the position of the zoom box.
   <Function>
   - Using many image fonts can slow operations on the screen editor. 
     When that happens, a warning dialog box displays with the "Do not show
     this message again" option.
   - There was an error in the SRAM usage size.
   - When copying/pasting change screen switches between projects, sometimes
     the screen number changed on pasting.
   <Transfer Tool>
   - When using the USB transfer cable (CA3-USBCB-01) to get information
     from the display unit, sometimes you were unable to get the screen list.
   - When the Windows system language was Korean, sometimes project data
     could not be transferred.
   - Converting then transferring a project without editing it sometimes
     caused a system error.
   - Even if the project file being transferred did not exceed the transmission
     size, the overcapacity error would sometimes appear.
   - Automatic transfer would sometimes timeout.
   - Receive would sometimes fail with projects set up with a large amount of
     data on the startup screen.
   - The security note is now displayed when transferring project file to 
     the SP5000 Series Open Box (SP-5B40/SP-5B41).
   <Project Comparison Tool>
   - Comparing the same project sometimes showed a difference
     in the logic screen.
   - When comparing projects with the same external device/PLC settings,
     sometimes the result showed a difference in the external device/PLC
     settings.
   - A warning message now displays when comparing projects with different
     external device/PLC settings.
   - Comparing the same D-script sometimes showed them to be different.
   <Text Table>
   - The font that needed to be installed for a multilingual application
     was unclear.
   <Data Display>
   - Sometimes the set base address changed unexpectedly.
   <Online Monitor>
   - While editing a function block, sometimes an error occurred.
   <Simulation>
   - In Simulation's [Logic] tab, sometimes part of the instructions did not
     display properly.
   <Text Screen>
   - Sometimes undo did not work properly.
   <Extended Script>
   - When registering addresses from the Recipe Data Setup Screen,
     sometimes you were unable to register as integer variables.
   <Project Converter>
   - Converting GP-ProPB3 screen data sometimes caused specific text tables
     to be deleted.
   - Converting GP-ProPB3 screen data sometimes caused errors and conversion
     was not possible.
   - Sometimes invalid data was generated for item names of converted
     sampling settings.
   - Sometimes tag names in trend graph channel settings did not convert
     properly.
   <IO Driver>
   - On the I/O screen, variables mapped to standard inputs sometimes did not
     display.
   <D-script>
   - Right-clicking script then selecting [Cut] from the shortcut menu sometimes
     caused GP-Pro EX to close unexpectedly.
   <Screen Editor>
   - Double-clicking sometimes did not open the Base screen.
   - There were errors in calculating the screen data size on IPC models.
   <Operation Log>
   - Setting SD card as the operation log's save destination sometimes caused
     an error.
   <Graph>
   - In the Data Block Display Graph settings screen, sometimes characters would
     be cut off.
   <Printing>
   - When printing screen information, sometimes the page break shifted
     its position.
   <Font>
   - When using image fonts and the text is set to smooth edges, font images may
     appear different between Windows 7 and Windows 10.
     To make the font images match, from the [Font Settings] select
     the [Use ClearType] check box.
   <Others>
   - In the WinGP settings, the initial destination folder for historical data
     was unintentionally set to "Folder".
   - As the Pro-face Device Configuration service has ended, the feature
     to create a project from a configuration file has been removed.

7-2 Display Unit
   <Load Screen>
   - When the x-coordinate of a loaded screen is 1000 or greater, the loaded
     screen did not display in the specified coordinate.
   - When using SP5000 Series SP-5B00, SP-5B10, or SP-5B90, 
     sometimes could not display images stored on external storage.
   <WinGP>
   - Repeatedly changing the Window screen sometimes caused memory usage
     to continually climb.
   - When a PC that is running WinGP enters sleep mode, sometimes WinGP would
     stop running.
   - When using the start function to run other applications, sometimes
     the application did not start.
   - When using the start function to run other applications, sometimes that
     application could not display in the forefront.
   <GP-Viewer EX>
   - Sometimes could not get historical data from a Historical Trend Graph.
   <Transfer CSV Data>
   - A recipe group name 33 characters or longer in the Transfer CSV Data
     function would sometimes cause the display unit to freeze unexpectedly.
   <Ethernet Multilink>
   - When operating the display as a slave unit, sometimes it could not start
     up properly.
   <LED>
   - The error LED on the GP-4G01 sometimes did not recover from flashing red.
   <Extended Recipe>
   - Copying recipes failed sometimes.
   - The Enhanced Recipe Data List part sometimes did not display
     the recipe data.
   <Offline>
   - SRAM free space sometimes did not display properly.
   - Sometimes changing EZ LAN Adapter Ethernet settings was not possible.
   - In SiteManager Embedded Settings, the SM-E version sometimes did not
     display properly.
   <Web Server>
   - To increase security, the "Run GP-Viewer EX" button is no longer displayed.
   <Online Monitor>
   - After a forced change, sometimes monitoring did not work properly.
   <Logic>
   - During Run mode, the system variable #L_Command was unable to reset
     the logic program.
   - On the LT4000 series, sometimes the processing of logic programs
     slowed down.
   <Memory Loader>
   - During download, sometimes the SiteManagerEmbedded license settings would
     get overwritten.
   <Play Sound>
   - On the SP5B10, sometimes you could not interrupt audio 
     with a short playback time.
   - On the SP5B10, the sound's LineOut output port did not work.
   - On the SP5B10, playing compressed sound files sometimes did not work
     properly.
   <CANopen Master Unit>
   - Transferring project files created in GP-Pro EX Ver. 4.08.200 to a to
     a SP5000 Series Power Box (model: PFXSP5B10) with a CANopen Master Unit
     (model: PFXZCHEUCAM1) attached, sometimes caused the display unit to
     repeatedly restart so you could not use it anymore.
   <SRAM>
   - Forced transfer mode sometimes did not clear SRAM.
   <Sampling>
   - Printing sampling data sometimes caused the display unit screen to freeze.
   <Error Messages>
   - Some error messages did not display properly on the display unit
     of QVGA size.
   <Screen Capture>
   - Despite successfully capturing the screen to JPEG, sometimes a write error
     would occur.
   <SD Card>
   - On the SP5B10 and GP-4000 series (excluding GP-4100 series, GP-4201TM, and
     GP-4301TM), timestamps for files on the SD card may be abnormal.
   <Functions>
   - Fixed OS vulnerability. [CVE-2019-12256, CVE-2019-12257, CVE-2019-12255, 
     CVE-2019-12260, CVE-2019-12261, CVE-2019-12263, CVE-2019-12258, 
     CVE-2019-12259, CVE-2019-12262, CVE-2019-12264, CVE-2019-12265]
   <Image Unit>
   - When the display unit is restarted after changing the display
     position(VX/VY) in the Video Control Area, video module images of VM Unit
     and RGP Input Unit may not be displayed occasionally.
   <Others>
   - Writing a 16-bit data type to a 8-bit array device sometimes caused
     undefined values to be written.

 7-3 Device/PLC
   <Pass Through Function>
   - Sometimes operation was not normal after toggling the virtual COM driver
     between enable/disable (Device Manager settings).
   <Rockwell Automation, Inc. EtherNet/IP>
   - Importing certain tags/aliases failed sometimes.
   - Import sometimes failed when there was a line break between L5K file tag
     information.
   <KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct>
   - A communication error would sometimes arise in the existing system of
     a GP-4G01 HMI.
   <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When the [PC No.] was 16, sometimes communication was not normal.
   <ODVA EtherNet/IP Explicit Messaging>
   - When using the Implicit Messaging function in 1:n communication 
     with certain equipment, sometimes Input data could not be read properly.
   - In the middle of setting up many [Individual Device/PLC Setting], GP-Pro EX
     would sometimes exit unexpectedly when running [Individual Device/PLC
     Setting].
   <Siemens AG Ethernet Gateway for SIMATIC MPI/PROFIBUS>
   - In a 1:n connection, sometimes unable to recover from a timeout error.
   <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - RAAA101error happened when data type of tag is different at display data
     type in Data Display part.
   - Importing tags would sometimes take longer than expected.
   <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - On rare occasions, communication errors occurred on the SP-5B00, SP-5B10,
     and SP-5B90.
   - Variable names beginning with the letter "T" sometimes caused variable
     import operations to fail.
   - When function comments were set up, sometimes importing variables
     would fail.
   - Data types that mix upper and lower-case characters sometimes caused import
     to fail.
   - When using scope names with upper and lower-case characters, variables
     set up on screens may become "Undefined" due to the Import Variables
     command.
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - In [Symbol] mode, when converting structured variables in the [Addresses
     To Convert] dialog box, the addresses for the structured variables after
     conversion were the same.
   <Siemens AG TIA Portal Ethernet>
   - Memory usage has been greatly reduced by filtering and importing
     only required tag information.
   - You can now import TIA Portal projects that include groups.
   - When importing V1.13.02 or later projects with a [Timer] data type, if 
     the selected PLC does not support that data type, the import operation
     is interrupted.
   - Instead of skipping when importing tags that already exist, the operation
     now overwrites tags.
   - The Function Block (FB) is now supported as a data type.
   - By supporting TIA Portal V15.1, some projects could not be imported.
   - When a function block (FB) was set up in another function block (FB),
     GP-Pro EX would sometimes exit unexpectedly.
   <Mitsubishi Electric Corporation iQ-R/F Ethernet(SLMP Client)>
   - The filter function when importing labels did not work.
   <Digital Electronics Corporation - Generic Ethernet>
   - When a connection open error occurred, sometimes the error status did not
     show in the control area.
   - When a TCP connection was opened using the first control area and
     a UDP port was opened using the second control area, a protocol stack error
     might occurred.

 = V4.08.200 ===================================================================
 7-1 Editor
   <Startup Screen Settings>
   - On the SP5B10 series, sometimes the progress bar did not display properly.
   <External Device Settings>
   - After setting up the CoDeSys Automation Alliance CoDeSys V3 Ethernet 
     driver, deleting it sometimes caused GP-Pro EX to end unexpectedly.
   - When using the Ethernet Gateway for SIMATIC MPI/PROFIBUS external device, 
     sometimes text strings were truncated.
   <Function>
   - You can now set up an error message to display when accessing the SD card 
     or USB storage fails.
   - Vulnerabilities have been addressed to prevent unauthorized code from 
     running as a result of spoofing.
   - Using many image fonts can affect operations on the screen editor.
     When that happens, a warning message now displays.
   <Project Converter>
   - Editing converted sampling settings sometimes caused GP-Pro EX to end 
     unexpectedly.
   <Project Comparison Tool>
   - Instead of displaying "WinGP Setting", the comparison result displayed 
     "IPC Setting".
   - When you run comparison on a project where changes were made to 
     the settings from the display unit's offline menu, the result showed some 
     items as different even if it did not change.
   <Transfer Tool>
   - Instead of displaying "WinGP Setting", the comparison result displayed 
     "IPC Setting".

 7-2 Display Unit
   <COM Port>
   - On the SP5B10, even if there was an issue with the first byte in the 
     received data, sometimes no error was detected and thus no error 
     processing occurred.
   <Play Sound>
   - Could not stop playing sound files on the SP5B10.
   <SD Card>
   - The SP5B10 and GP-4000 Series (excluding GP-4100 Series, GP-4201TM, 
     and GP-4301TM) could not recognize a SD card that was filled with data 
     and had no more available space.
   <Data Display>
   - When the Data Display was drawn on the front layer, sometimes the part 
     shape did not display.
   <Pro-face Remote HMI>
   - Repeated connections in asynchronous mode sometimes caused a system error.
   - When changing from asynchronous mode to synchronous mode, sometimes a 
     popup keyboard appeared in the center of the screen.
   <Filing>
   - On the GP-4114T, GP-4115T, and GP-4116T, repeatedly running PLC->SRAM 
     transfer sometimes produced a transfer error.
   <File Manager>
   - The File Manager sometimes did not close when changing the screen on 
     an asynchronous connected Remote HMI.
   <Operation Log>
   - While connected to Remote HMI, working with function switches on the 
     display unit sometimes got recorded as Remote HMI operations.
   <Alarm>
   - If an alarm is triggered right after starting WinGP, sometimes the 
     Trigger Time is 00/00/00 00:00:00.
   <Offline>
   - Even if a USB device was connected, sometimes nothing displayed on the 
     USB screen of peripheral settings.
   <Memory Loader>
   - Downloading sometimes erased the SiteManager settings.
   <WinGP>
   - While [Start Application] was running, shutting down the power sometimes 
     caused WinGP operations to slow the next time it was run.
   - While the Write Filter was enabled, updating the Text Table from offline 
     sometimes caused a system error.
   - Continuously scanning bar codes sometimes caused WinGP to show an error 
     and stop running.
   <Sampling>
   - With the Global Trigger Action setting enabled, enabling and then 
     disabling FTP Transfer in the Save as CSV settings sometimes caused 
     the display unit to stop unexpectedly.
   <EZ Fingerprint Authentication Unit>
   - On closing the fingerprint data registration screen, on the rare occasion 
     the screen stopped working.
   <Memory Card Settings>
   - When the available space of the external storage set in [Display Unit] - 
     [Mode] - [Memory Card Settings] was greater than 4.3 GB, the [Free Space 
     Storage Address] could not be assigned the maximum value of 65535.
   <Others>
   - Even when the backlight on the GP-4104 was red, the screen display OFF 
     operation was still working.

 7-3 Device/PLC
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Using the  "Utility"-"Copy from Another Project" function, or copying 
     and pasting parts between projects sometimes caused changes to variable 
     names associated with parts on the screen.
   - Sometimes could not set up specific tags in parts on the screen.
   - Even though a data type was listed as supported in the Device/PLC 
     Connection Manual importing the corresponding Data Type failed sometimes.
   - When importing array data types, sometimes the array data type was 
     imported as a simple array.
   <GE Intelligent Platforms Series 90-30/70 SNP>
   - Sometimes communication errors were erroneously detected.
   <Rockwell Automation, Inc. EtherNet/IP>
   - When using the Edit button in the Native Series to reimport a L5K file 
     for Control/Compact/Flex Logix Series, sometimes symbol names used by 
     parts on the screen would either change or become undefined.
   <Yaskawa Information Systems Co., Ltd MMCloud TCP Client>
   - In GP-Pro EX, if the data transmission volume was large and the data 
     transmission interval was shortened by the sampling settings and global 
     trigger settings, communication could not be restored after the first data 
     transmission.
   - When sending 65536 or more bytes of data the communication is divided 
     into two or more separate transmissions; however, data after the second 
     transmission failed.
   <ODVA EtherNet/IP Explicit Messaging>
   - Going offline on the display unit while running Implicit Messaging 
     communication sometimes caused the sending of invalid commands.
   <Siemens AG TIA Portal Ethernet>
   - In the Individual Device Settings dialog box, using [Edit] to import tags 
     sometimes caused variables used by parts on the screen to become 
     "Undefined".
   <Pass Through Function>
   - The virtual COM driver sometimes failed to install.

 7-4 Pro-face Remote HMI Server
   <Screen Distribution>
   - Distributing screens with Remote HMI Server sometimes caused the server 
     screen to become blank (white).
 
 = V4.08.101 ===================================================================
 7-1 Installation
   - Resolved a false positive by some antivirus software.

 = V4.08.100 ===================================================================
 7-1 Editor
   <Screen Editor>
   - On the SP5B40 and SP5B41, you could set up the clock update setting even 
     though it would not work.
   - When the screen editor language and font set did not match, using 
     Cut and Paste to paste parts sometimes did not work.
   - The menu from Screen tab's shortcut menu had a spelling error.
   
 7-2 Display Unit
   <Storage>
   - Now displays an error message when access to 
     the SD card or USB storage has failed.
   <Logic Program>
   - On the LT3000, if power is turned off in the middle of executing 
     the PLS instruction, after restarting sometimes the program failed 
     at the PLSY instruction.
   <COM Port>
   - On the SP5B10, simultaneously using both Remote HMI and RS485 
     communication caused a communication error.
   - When using XON/XOFF flow control, if received data 
     included a XON/XOFF value but had a framing or parity error, 
     the error was ignored and flow control was performed.
   <Alarms>
   - On the GP-4000 Series (excluding GP4000M and GP410* Series), 
     the SRAM alarm data was corrupted and caused a system error rarely.
   - Searching the alarm history sometimes failed on alarm displays.
   <Sampling>
   - On the rare occasion, sampling outputs to CSV output the wrong content.
   <Front End Processor>
   - On converting Kanji characters with the FEP keyboard, 
     the FEP display bar sometimes moved to the top of the screen unexpectedly.
   <LED>
   - On the GP4G01, after the error LED turned red or blinked, 
     the LED did not turn off after going offline or after a transfer operation.
   <GP-Viewer EX>
   - The IP addresses in the [Recent files] list sometimes differed 
     with the server (display unit).
   <USB Port>
   - When a SD card was write-protected and connected to the display unit 
     with a USB-SD card reader, sometimes the display unit could not access 
     the SD card.
   <Offline>
   - On the SP5B10, GP4000 Series (excluding GP4000M and GP410* Series) 
     and LT4000 Series, even if there was an issue, running the Check LAN 
     from the Offline screen's Maintenance Menu did not report an error rarely.
   <Transfer Screen>
   - After changing the project configuration to the SP5000 Series Open Box, 
     sometimes transfer was not possible.
     
 7-3 Device/PLC
   <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - In [Symbol] mode, importing a TPY file from the edit function sometimes 
     overwrote names of symbols that already existed in the project.
   - Importing data types listed as supported in the Device/PLC Manual 
     failed sometimes.
   <Mitsubishi Electric Q Series CPU Direct>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
   <ODVA Ethernet/IP Explicit Messaging>
   - When using Implicit Messaging with a specified device, 
     the display unit would sometimes stop unexpectedly.
   - When using Implicit Messaging with a specified device, 
     on stopping communication sometimes a socket error would display.
   <Rockwell Automation, Inc. EtherNet/IP>
   - When connected to a ControlLogix 5580 controller, 
     sometimes a lamp on the screen would not light up.
   <Keyence KV-700/1000/3000/5000 CPU Direct>
   - The Passthrough function sometimes did not work on the GP-4G01.
   <Mitsubishi Electric QnA Series CPU Direct>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
   <Omron C/CV Series>
   - With the GP-4G01, sometimes communication errors occurred 
     on HMI of the existing system.
     
 7-4 Pro-face Remote HMI Server
   <Security>
   - Enhanced the encryption of passwords included in exported file.
 
 = V4.08.000 ===================================================================
 7-1 Editor
  <Editor>
   - When run on the display unit, sometimes the blink speed of placed images
     or registered images did not match the editor settings.
   - Sometimes saving the project failed when multiple I/O driver instructions
     were placed in a function block.
   - HMI system variables associated with the device/PLC did not display
     in the address settings window and cross reference.
   - When an error occurred in the enhanced recipe or sampling group editor,
     and after deleting settings clicking the error caused the editor
     to end unexpectedly.
   - In the sampling group's Display/Save in CSV tab,
     the layout has been improved.
   - In a special switch, even though on launcher start up you enable getting
     the operation log, sometimes the setting was not saved.
   - Regardless of the name set up for a global trigger, sometimes
     it displayed as "undefined".
   - When you used parts with the touch warning sound enabled for interlocked
     parts, the screen information sometimes showed 0 for the number of parts
     you can place on the screen.
  <Sampling>
   - Sometimes the sampling settings were deleted when using
     the Save As command to save the project or using the Version Reverter
     to save as a previous version.
  <Project Comparison Tool>
   - Comparing projects with image parts without an actual image set up
     sometimes caused errors in the comparison result.
   - When using the Project Comparison Tool to compare two different projects
     with the same part but in different coordinates, sometimes the comparison
     showed it as not compared.
   - In the graph's alarm settings, if an address is set up in the alarm
     operation field, the comparison could get interrupted.
   - When a project included multiple parts with the same shape,
     the comparison result was "different" even if you compared
     the same project.

 7-2 Display Unit
  <EZ LAN Adapter>
   - Sometimes a socket error occurred during communication.
  <Enhanced Recipe>
   - Display unit was unable to import CSV data that
     included recipe ID 32768 or higher.
  <Graph>
   - When XY Historical Trend Graphs or XY Data Block Graphs were placed
     on screens B9000 or higher, images that overlapped with the graph
     did not appear.
  <Print>
   - While not connected to the GP Remote Printer Server and
     a print job was canceled, the print job occurred after the server
     reconnected to the LAN.
  <FTP>
   - Connecting in PASV mode from an FTP client to the SP5000 Series
     Power Box (SP-5B10) failed on the rare occasion.
  <System variables>
   - When multiple PLC are connected, there were times when the system variable
     was not updated with the correct time even though the clock update setting
     was valid.
  <Operation log>
   - The operation log did not show the message "SlctList On -" when
     you used the Selector list's alarm history switch to acknowledge all,
     clear all, clear all restored alarms, or clear all acknowledged alarms.
   - The operation log recorded starting the SD as "CF Start".
  <USB Device>
   - In GP4000 series (except for GP-410* series) and LT4000 series,
     when a USB device is inserted/removed, the screen would freeze.
  <Pro-face Remote HMI>
   - When used with WinGP or the SP5000 Series Open Box, screen updates
     on the client screen could take up to 10 seconds.

 7-3 Device/PLC
  <CANopen>
   - Improved startup time from the second time after transfer of project data.

 = V4.07.300 ===================================================================
 7-1 Editor
  <Editor>
   - In the switch's Set Bit group feature, the label "Number" has changed to
     "Group".
  <Project Converter>
   - When converting GP-Pro PBIII project data, regardless of whether or not
     there were screen drawings, the logged showed the message
     "1/2 kanji fonts are not converted".
   - If there were invalid characters in the Convert From or Convert To fields
     in the Project Converter, and you clicked [Browse],
     sometimes the Select File dialog box did not display.

 7-2 Display Unit
  <Enhanced recipe>
   - In the Transmission settings, if you set a variable with less than 32 words
     as the destination address, any transferred recipe data could become zero.
  <Ethernet>
   - On the GP4000 series (excluding GP4000M series, GP410* series)
     and LT4000 series, the Ethernet communication is slow.
  <EZ LAN Adapter>
   - When EZ LAN Adapter was attached/detached,
     the display unit rebooted rarely.
   -  Even if Default Gateway was specified, it was not set.
  <System Variables>
   - If you touched the screen while the operation lock was enabled,
     and you continued to touch the screen when the operation lock was released,
     on releasing the touch the value of LS9234 bit 00 was 0 (lock is on) and
     would not return to 1 (lock is off).
  <EZ Tower Light>
   - If you connect the EZ Tower Light to a computer
     with GP-Viewer EX installed, sometimes exiting GP-Viewer EX caused
     the EZ Tower Light to flash red.
  <Offline>
   - In the Offline screen's Maintenance menu, even though there was
     nothing wrong with the display unit, sometimes the Check Display Pattern
     did not draw the pattern to the right and bottom margins of the screen.
  <Brightness>
   - When the brightness setting on the SP-5000 Series Power Box (SP-5B10)
     was [Auto], turning off the display unit did not retain
     the brightness setting.
  <Brightness adjustment bar>
   - When adjusting the brightness setting with the brightness adjustment bar,
     sometimes the incorrect sounds were emitted on touch.
  <Memory Loader>
   - Sometimes the display of the numerical value for free space
     in storage shifted downward.
   - The Memory Loader displayed a typo for the following models: 
     SP5B10, GP-4114T, GP-4115T, and GP-4116T.
  <Pro-face Remote HMI>
   - Screen of client did not display correctly,
     when the display of GP-4G01 unit's [Orientation] was [Landscape].

 7-3 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - Reading display unit information from the Transfer Tool sometimes failed. 
  <CoDeSys Automation AllianceCoDeSys V3 Ethernet>
   - Importing variable comments sometimes failed.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Sometimes the wrong value was read from BOOL type variables.

 = V4.07.200 ===================================================================
 7-1 Editor
  <Editor>
   - When changing the model for a LT series project, 
     if the I/O driver's L system variable was used in a part, 
     sometimes the system variable's argument did not get updated.
   - Even though the operating language was Japanese, sometimes part of 
     the sampling settings and global trigger settings displayed in English.
  <Project Comparison Tool>
   - If you ran the Project Converter on a project set up with a Text Table, 
     sometimes the resulting project could not be compared.
   - If you compare projects where symbol variables were added in
     a different order, sometimes the comparison will show differences
     in the symbol variable settings.
   - Comparing function switches sometimes resulted in the message, 
     "Comparison item not found".
  <Project Converter>
   - When converting a GP-ProPBIII project of a portrait view model, 
     sometimes the placement of image objects would get re-arranged.

 7-2 Display Unit
  <Alarm>
   - If the GP is shutdown while an alarm is triggered, on the rare occasion
     the alarm time stamp showed "00/00/00".
   - If the GP is shutdown while an alarm is triggered, 
     and a new alarm is triggered after restarting, on the rare occasion
     the GP stopped working.
  <Security>
   - On the GP3000 series (excluding the GP-3200 series),
     using security settings sometimes slowed the scanning of parts.
  <Enhanced Recipes>
   - If you were unable to save Enhanced recipe elements, it occasionally
     resulted in not being able to run the Enhanced recipe process.
   - If you used Enhanced recipes on a project whose size approached 100%,
     by adding enhanced recipe data on the unit you could save beyond
     the maximum project size. 
     If you transfer it back to the editor and open the project,
     you may not be able to transfer it again due to a transfer size error.
  <Text Table>
   - On the GP4000M series, sometimes the loading of the text
     table file (USB memory) on start up did not work.
  <Memory Loader>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP-4100 series), sometimes you could not use
     a SD card on the Memory Loader tool.
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10)
     or SP5000WA series, sometimes the initial screen displayed without
     recognizing USB storage even though the initial screen was set up
     to display only after recognizing USB storage.
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update 
     stopped.
  <GP-Viewer EX>
   - Connecting GP-Viewer EX to WinGP and operating an Historical Trend Graph
     caused the display of an error dialog box.
  <GP-4G01 Gateway Mode>
   - When communicating at high speed (115.2 kbps) with a PLC
     with good communication performance, occasionally a communication error
     occurred on the HOST side.

 7-3 Device/PLC
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - On the LT4000 series, GP-4402 WW, GP-4502WW, GP-4114T, GP-4115T, GP-4116T, 
     and SP5B10, sometimes after transferring an error displayed and
     the unit did not start up.
  <Siemens SIMATIC S5 3964(R)>
   - Note the following fixed defects when Gateway Mode on the GP-4G01: 
     - If the GP-4G01 has never run communication at all and the HMI starts
       communication, a response error occurred once on the HMI.
       After a re-transmission, the error is restored.
     - If you enter the GP-4G01 offline screen then change back to the online
       screen, a response error occurred on the HMI.

 = V4.07.101 ===================================================================
 7-1 Display Unit
  <Storage>
   - With the combination of GP-Pro EX V4.07.100 and SP5000 series (SP5B10) 
     or GP4000 series (excluding GP4000M series, GP41** series), frequently
     accessing the SD card on the display unit, sometimes the screen update 
     stopped.

 = V4.07.100 ===================================================================
 7-1 Editor
  <Screen Editor>
   - If you use Call Screen to load a screen with text that used the Image font
     type with Anti-alias enabled, sometimes the text defined in the screen
     editor did not appear.
  <Simulation>
   - Improved the issue that logic tab in simulation not displaying.
  <Project Comparison Tool>
  <Version Reverter>
   - Entering invalid characters in the Project Comparison Tool's Source/Target
     for comparison fields, or the Version Reverter's Convert From File
     or Convert To File fields, sometimes caused the tool to exit unexpectedly.

 7-2 Display Unit
  <Online Monitor>
   - If you set the Retry Count to 9 or more in the Monitor settings,
     sometimes the connection failed and an error occurred.
  <Screen Transfer>
   - Failing to transfer a project with device/PLC registers mapped
     to the System Data Area sometimes caused an invalid value to get written
     to the system area start address.
  <EZ Fingerprint Recognition Unit>
   - Sometimes GP4000 Series units could not register fingerprints
     on EZ Fingerprint Recognition Units sold from 2016 onward.
  <WinGP>
   - Added preventative measures against spoofed arbitrary code that may be 
     executed.
  <GP4000 Series>
   - On the GP-4201TW, the USB port (Type A) could not be recognized.
  <Communication>
   - The models as follows would get hung with COM port communicating. 
     - LT4000 series
     - GC4000 series
     - GP4*02WW series
     - GP411*T series
     - GP4*01TM series
 7-3 Device/PLC
  <Communication Driver>
   - When converting the project of GP-Pro PBIII which set the following 
     communication driver, it could not be transmitted to the HMI.
     - Fanuc LTD. Power Mate Series
     - Fuji Electric Co.,Ltd. MICREX-SX Series SIO
     - Hitachi, Ltd.S10 Series SIO
     - KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct
     - KEYENCE Corporation S10 Series SIO
     - Mitsubishi Electric Corporation A Series CPU Direct
     - Mitsubishi Electric Corporation A Series Computer Link
     - Mitsubishi Electric Corporation FX Series Computer Link
     - Mitsubishi Electric Corporation FX Series CPU Direct
     - Mitsubishi Electric Corporation Q Series CPU Direct
     - Mitsubishi Electric Corporation Q/QnA Serial Communication
     - Mitsubishi Electric Corporation QnA Series CPU Direct
     - OMRON Corporation C/CV Series HOST Link
     - OMRON Corporation CS/CJ Series HOST Link
     - Panasonic IndustrialDevices SUNX FP Series Computer Link SIO
     - Siemens AG SIMATIC S5 3964(R)
     - Siemens AG SIMATIC S7 3964(R)/RK512
     - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200)
     - YASKAWA Electric Corporation MEMOBUS SIO
     - YOKOGAWA Electric Corporation Personal Computer Link SIO

 = V4.07.000 ===================================================================
 7-1 Installation
  <Pro-face Remote HMI Server>
   - If you uninstall Remote HMI Server then re-install without restarting
     your computer, installation could fail.
   - If you ran a software update while Pro-face Remote HMI Server is running, 
     installation could fail.

 7-2 Editor
   <Transfer Tool>
   - When the display unit was set up with a Send/Receive project password and
     on connection you entered the wrong password, when the password screen
     opened again an error message appeared.
   - When checking the Memory Loader backup data or creating a new project, 
     the file selection screen's file pulldown list contracted right away.

 7-3 Display Unit
  <WinGP>
   - WinGP failed to start on computers with the Multilingual User Interface
     (MUI) pack installed.
   - In Forced Transfer mode, on exiting WinGP a dialog box appeared with
     corrupted characters in the title bar.
  <System Variables>
   - If you set an invalid value other than a BCD value for the clock data, 
     the clock did not show the time correctly.
  <Communication Scan>
   - When the device/PLC communication scan was OFF, 
     an error appeared when accessing the PLC.
  <GP4100 Series>
   - When the transmission speed was 115,200 bps, the USB-Serial (RS-232C) 
     conversion cable could not be recognized.
  <Sampling>
   - Sometimes sampled data could not be collected anymore if you detached 
     external storage from the unit while saving sampled data to CSV format.
  <FTP>
   - While an FTP server was not added in the FTP server settings and 
     you captured a screen and tried saving to an FTP server, 
     you could not enter offline mode or transfer mode anymore.
  <Web Server>
   - If you set an invalid value for the Device View's Update Frequency 
     parameter from an URL, the device value did not update or an error 
     occurred.
  <Enhanced Recipes>
   - After setting the label's destination address in the screen editor,
     if you change the destination address by using either Change
     Device/PLC or Convert Address, sometimes the recipe label did not display.
  <Pro-Server EX>
   - Entering offline mode while running one of the following processes
     sometimes caused the corresponding operation to not run:
     - [Save] in the Save GP Screen tool
     - [GP JPEG Upload] action
     - Excel form action's [Upload GP screen data]
  <Others>
   - When an online error and system error occur at the same time, 
     sometime touch did not work and the error window's reset button
     would not operate.
   - There was an issue where system errors did not display on
     the GP-4201TM (Modular Type) and GP-4301TM (Modular Type).

 7-4 Device/PLC
  <ODVA EtherNet/IP Explicit Messaging>
   - The use of Ethernet 2 port functionality by SP5000 series (SP-5B10)
     could result in communication errors.
  <Siemens AG TIA Portal Ethernet
   - Tag import functionality failed to import data type "Struct".
   - Tag import functionality failed to import tag data from STEP7
     Safety projects.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Cannot launch HMI if project file imported several Tag data in some case.

 = V4.06.300 ===================================================================
 7-1 Editor
  <Simulation>
   - In simulation, when monitoring the logic, the display position of I/O 
     values may shift sometimes.
  <Project Comparison Tool>
   - When comparing projects with the [Show only differences] option, 
     double-clicking the difference sometimes displayed the wrong line. 
  <Editor>
   - Addressed the feature in our software that caused some antivirus software 
     to erroneously identify as a virus.

 7-2 Display Unit
  <USB Devices>
   - When using GP4000H (hand-held) Series and you connect to multiple USB hubs
     and USB devices, the display unit sometimes reset on disconnecting an USB 
     device.
  <Enhanced Recipe>
   - Turning ON #H_RecipeControlMapAddress occasionally generated a system 
     error.
  <Alarm>
   - The wrong warning message appeared when drawing an alarm part with banner 
     enabled and a part with animation enabled on the same screen.
  <Operation Log>
   - When using SP5000 or GP4000 Series (except GP-4100 Series), using a read
     -only SD card sometimes slowed the performance of operation logs.
  <Memory Loader>
   - When using SP5000 or GP4000 Series with USB 2.0 USB memory, the Memory 
     Loader sometimes failed. 
   - Memory Loader could not start under the following conditions.
     - Display unit's system version was 4.50.000 or later
     - Startup data for the Memory Loader was created on version before 
       4.50.000.
  <Logic Monitor>
   - When using GP3000 and LT3000 Series units, the wrong value was set to
     #L_FaultLogicScreen and #L_FaultStep.
  <EZ Tower Light>
   - When using SP5000 Series Open Box (SP-5B40) and while WinGP was restarting 
     after a transfer, the EZ Tower Light sometimes buzzed and all the layers
     turned red and flashed.
  <Text Table>
   - When using the Load Text Table feature with codepage 850, sometimes the 
     text did not display properly.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - Grouped Data blocks and PLC tags cannot be imported.
  <ODVA EtherNet/IP Explicit Messaging>
   - Transfer error is happened if user configured assembly instance over 256.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Individual Device Settings in Beckhoff TwinCAT driver sometimes shows wrong
     settings.

 = V4.06.200 ===================================================================
 7-1 Editor
  <Simulation>
   - In the Text Table Settings, when the value in the Change Language control
     address is out of range (17 or greater), editing the label in an extended
     recipe could cause simulation to exit unexpectedly.
   - Using unregistered variables in the function block of a logic program
     occasionally caused simulation to exit unexpectedly.
   - Occasionally simulation stopped working when you assigned a fractional
     value to a Float or Real data type variable.

 7-2 Display Unit
  <Project Copy>
   - Occasionally this tool was unable to copy projects associated with
     PS-5000 or PS/PE-4000 models to WinGP.
  <COM Port>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the COM port.
  <USB A Port>
   - An USB device with three or more configuration descriptors becomes unusable
     when connected to the GP4000 Series (except GP-4100 Series, GP-4201-TM,
     and GP-4301TM).
  <USB/SIO Cable>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not communicate
     properly over the USB/SIO(RS232C) and USB/SIO(RS422/485) cables.
  <Bar code input>
   - Occasionally, the SP500 Series Power Box (SP-5B10) did not accept input
     from a USB bar code reader properly.
  <Touch Panel>
   - When using the SP5000 Series Power Box (SP-5B10) with the Advanced Display
     (SP-5x00WA), occasionally touch panel operations did not work properly.
  <Filing>
   - On the GP-4100 Series (color model), after using a Special Switch
     to transfer filing data from the device/PLC to SRAM and the display unit
     was turned OFF, occasionally the transferred data was not saved.
  <Sampling>
   - When you setup the System Data Area as a PLC device, and you save sampling
     data in CSV format, occasionally the timestamp for sampling data is shown
     as 00:00:00.
  <Extended Scripts>
   - In rare cases, using drawing functions in extended scripts caused
     the display unit to stop working.
  <Logic program>
   - On the LT4000 Series, after the PLSQ instruction you could not output
     acceleration/deceleration pulses from the PLSY instruction only.
     <Logic program>
   - When you start Monitor Step on the SP5000 Series Power Box (SP-5B10),
     the value in a portion of the bit variables used in function blocks
     could not be refreshed.
  <WinGP>
   - Even when communication is not yet established with a PLC once, now you can
     still back up internal devices.
  <Script>
   - Importing a CSV file with an unsupported line feed code (LF) could cause
     the display unit to stop operating normally.
   - You can now use "LF" as the line feed code in CSV files read in with
     the SD_read_CSV function.
  <Offline>
   - When using the bar code settings or script settings in WinGP,
     even when COM was in use it displayed as [Do not use]. 
     Additionally, on the SP5000 Series Open Box (SP-5B40), even if 
     COM was set up not to be used, COM appeared as if it was set up.
   - In the SP5000 Series Open Box (SP-5B40) Bar Code Settings,
     even though you displayed the Bar Code 2 settings, the 5V Power Supply
     always showed the setting defined in Bar Code 1.
  <Alarms>
   - On the GP4000 series (except for GP-41** series, GP-4201TM,
     and GP-4301TM), sometimes system errors would display
     when an extended alarm message occurred.
  <Others>
   - At run time on the SP500 Series Power Box (SP-5B10), occasionally
     the Display LED flashed between red and green and the display unit
     would not run anymore.
   - After replacing the system card on the SP5000 Series, you occasionally
     were unable to start up the unit.
   - In rare cases, the LT4000 Series stopped working during
     serial communication.

 7-3 Device/PLC
  <Mitsubishi Electric Corporation Q/QnA Serial Communication>
   - When using multiple CPUs, occasionally invalid values were read.
   - Occasionally normal communication was not possible when using
     Serial Multi Link.
  <YASKAWA Electric Corporation MP Ethernet/MECHATROLINK>
   - When selecting "Stepping(Orientalmotor) AZ Series 
     Multi-Axis Driver(M-III)", the parameter reference function in address 
     input dialog did not work.

 = V4.06.101 ===================================================================
 7-1 Installation
   - The following behavior has been revised by removing corresponding file;
     Some virus check tools show a warning message of virus detection.

 = V4.06.100 ===================================================================
 7-1 Editor
  <Version Reverter>
   - If you converted a V4.0 project to V3.6, you could not open that project
     in the screen editor.
  <Logic>
   - After inserting a label, using the Undo command sometimes caused GP-Pro EX
     to exit unexpectedly.
  <Transfer CSV Data>
   - When using the Japanese operating language, in the Recipe Settings
     (Transfer CSV Data) - CSV Data Transfer Condition, the [Number of Digits]
     field displayed as [Decimal Places].
  <Comparison Tool>
   - When the model was SP5B40+SP5660TP, comparison was not possible with
     projects using different display modules.
  <Transfer Tool>
   - When using automatic transfer to send a project with backed up historical
     alarm data, sometimes SRAM was not cleared and historical data became
     invalid.
   - When sending projects to multiple display units in automatic transfer mode,
     sometimes the transfer tool exited unexpectedly.

 7-2 Display Unit
  <I/O Driver>
   - When the display unit turned OFF, the I/O driver instructions PLSY/PLSQ
     did not output anymore.
   - Analog output was not possible when the analog output's value for the lower
     limit was greater than 0.
  <WinGP>
   - As soon as a display unit started up, touching a Special Switch to enter
     the offline screen sometimes caused the PC-Runtime to display a halt error
     message.
  <Printing>
   - When using certain printers, printer output was duplicated.
  <Offline>
   - Transferring projects from past versions of GP-Pro EX to GP4000 series
     (excluding GP4100 series, GP-4201TM, and GP-4301TM) sometimes caused
     the setup items in the offline screen to not display properly.
  <System Data Area>
   - Depending on the address you used as the system data area's start address,
     the system data area did not operate properly.
  <Transfer CSV Data>
   - Sometimes erroneous values were output when using Transfer CSV Data to
     create your CSV.
  <Logic>
   - In the logic program, setting a value greater than 65536 to a 16-bit
     address sometimes caused a communication error.
  <Pro-face Remote HMI>
   - Even though an Off delay switch was pressed on the client, screen change
     operation was possible on the display unit.
   - Even when a client monopolized touch operations, function switch operations
     on the Hand-held GP was possible.
   - While displaying an analysis list, changing the client to asynchronous
     connection caused a system error.
   - When running asynchronous screen monitoring while WLAN communication was
     unstable, and you used the [Previous Screen] switch, sometimes it
     displayed the wrong screen.
   - Pressing function switches on the hand-held GP did not monopolize touch
     operations and touch operations were possible from the client.
  <Enhanced Recipes>
   - On a screen without a Recipe List part, after receiving enhanced recipe
     data, copying the enhanced recipes actually copied the recipes prior to
     receiving the enhanced recipe data.
  <Screen Transfer>
   - When using the SP5000 Series Power Box (SP-5B10) in forced transfer mode,
     transferring the project file sometimes failed.
  <Others>
   - On the rare occasion, LT4000 series units did not start up.

 7-3 Device/PLC
  <Siemens AG TIA Portal Ethernet>
   - When using the Siemens AG TIA Portal Ethernet driver, failed to transfer
     the project to the display unit after re-importing the TIA Portal project
     file.
  <TwinCAT ADS/AMS driver>
   - When using the Beckhoff driver, sometimes String-Array text could not
     display in the GP's data display part.
  <Rockwell Automation, Inc. EtherNet/IP>
   - Occasionally, the driver's scroll bar did not work properly.
  <IEC Standard IEC 60870-5-101>
   - Occasionally, the IEC driver's element status addresses did not work
     properly with alarm history.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Changing the tag name occasionally caused operations to not work properly.
  <LS Industrial Systems Co., Ltd. GLOFA Series Cnet>
   - When using older link units, occasionally communication errors occurred.

 = V4.05.100 ===================================================================
 7-1 Editor
  <Editor>
   - On the PS-5000 series and PS/PE-4000 series, after selecting COM2
     in the device/PLC settings, sometimes the RS422/485 option
     could not be selected.
  <Sampling>
   - In the Sampling settings, editing the address in the address settings
     sometimes caused the application to exit unexpectedly.
   - In the Print Settings, sometimes the number of characters
     in the Print Preview did not match the actual printout.
  <Print>
   - Printing the I/O settings omitted the I/O name.
  <Data Display>
   - If you select the Sign +/- check box in a Numeric Display,
     and from the Display settings select Image Font,
     sometimes the preview did not display numeric values.
  <Text Table>
   - Editing the contents of the Text Table sometimes changed the position of
     referenced text parts.
  <Function Blocks>
   - After creating a function block with no registered variables,
     displaying [Project Information] or the function block's
     [Change Attributes] dialog box occasionally caused the application
     to end unexpectedly.
  <Project Comparison Tool>
   - Comparing the same project sometimes produced differences.
  <Remote Viewer Settings>
   - Unable to set up FTP or Web Server functions on GP3300 Series,
     models earlier than Rev*-4.
  <Others>
   - After deleting a base screen, from the [Edit] menu selecting [Undo]
     sometimes changed the [Shape] of parts to [No shape].
   - When deleting one of the vertex points on a Polyline, Polygon,
     or Picture Display, sometimes the display position shifted to something
     other than the deleted point.

 7-2 Display Unit
  <WinGP>
   - From the system menu, reset sometimes caused WinGP to end unexpectedly.
   - From the WinGP offline screen, sometimes the task manager would not start.
   - When using a project set up with sound functions,
     sometimes you could not enter offline mode.
  <Offline>
   - On a display unit that does not support MPI,
     from the offline maintenance menu's [COM1/COM2/LAN Check]
     property selecting [COM2/RS422] would sometimes display the dialog box
     for MPI models.
  <Sampling>
   - Saving sampling data to CSV format sometimes caused
     a date of 00/00/00 for sampling records.
  <Transfer Tool>
   - When CF card is selected as the destination in the [Project Information],
     during screen transfer the Transfer Tool sometimes ended unexpectedly.
  <Online Monitor>
   - When monitoring logic online and the connection with
     the display unit fails, sometimes the display unit would cease to run.
  <Data Display>
   - When the Address Type is [Address] or [Device Type Address],
     the popup keypad's display speed has been improved.
  <Memory loader>
   - When using USB memory with the write protection feature enabled
     and you transfer screen data from the memory loader, the IP address
     on the display unit would sometimes change.
  <Error Message>
   - On the GP-4100 series (Color Model), when the backup battery
     is running low on power, the message "RAAA055:Clock data has been
     initialized" would display.
  <Logic>
   - When using a Bit Type system variable as a Function Block operand,
     sometimes the operation would be incorrect.
  <Script>
   - When using the Write File instruction, setup with offset and
     overwrite modes, the write operation took some time to complete.
  <System Variables>
   - On the GP-4100 series (Color Model), even though the project
     has not been transferred, sometimes the #H_TransferChange system variable
     would not turn OFF.
  <Momentary Switch>
   - On WinGP, while touching a momentary switch, touching two or more points
     outside the momentary switch sometimes caused the momentary switch
     to turn OFF.
  <Others>
   - On the GP-4100 series (Color Model), if the USB connection is interrupted
     while transferring the project, or the display unit is powered OFF,
     sometimes touch did not work.

 7-3 Device/PLC
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP5000 series, while communicating with the PLC,
     frequently accessing the SD card on the display unit sometimes caused
     a communication error.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - Sometimes failed to import variables.
   - Sometimes failed to import structured variables.
   - Reading text data sometimes caused WinGP or Open Box to stop running.
  <Panasonic IndustrialDevices SUNX MEWTOCOL7-COM Ethernet>
   - When communicating with an older CPU, 
     sometimes communication errors occurred.

 7-4 Pro-face Remote HMI Server
  <Screen Distribution>
   - On application distribution, if the client is disconnected
     then reconnected, sometimes the client screen would turn white
     and the application screen could not be displayed.

 = V4.05.000 ===================================================================
 7-1 Editor
  <Editor>
   - When using the Premium Display Module with 
     the SP5000 Series Open Box (SP-5B40), sometimes you could not open a
     project received using the Receive Project command.
   - Previously unable to set up a modem on the LT4000 series.
   - There was an error in part of the Cyrillic stroke font.
  <D-Script>
   - Added preventative measures against stack overflows and unauthorized memory
     access caused by spoofing.
  <Transfer Tool>
   - When using AGP3750T or AGP3560T, sometimes the run time was also
     transferred despite the setting defined in the Automatic Transfer property.
   - Added preventative measures against spoofing used to reference data.
  <Project Comparison Tool>
   - Sometimes the tool was unable to complete comparison of Alarm attributes.
   - The process was interrupted when comparing projects with the following
     parts or screens.
     - Remote PC Access Window
     - Alarm
     - Window
     - Graph
     - Sampling Data Display
     - Selector List
     - Text Alarm
     - Historical Trend Graph
     - Show CSV
     - Data Transmission
     - Filing
     - File Manager
     - Function Block screen

 7-2 Display Unit
  <Alarm>
   - Improved polling performance of extended alarms on GP4000 series,
     SP5000 series, and WinGP.
  <Script>
   - On the GP-4100 Series, GP-4201TM and GP-4301TM, communicating over
     RS-485(2-wire), clearing the send or receive buffer with the EXT_SIO_CTRL
     control variable sometimes disabled GP-4000 so it could not receive the 
     next data.
  <Startup>
    - On the SP5000 series and WinGP, when Device Monitor was enabled, sometimes
      the display unit had difficulty starting up.
  <Sampling>
   - The Sampling Display part's Refine Search feature was unable to find dates
     in the 2000 to 2009 year range.
  <FTP>
   - On the SP5000 Series Power Box (SP-5B10), previously unable to make a PASV
     Mode connection from an FTP client
  <Pro-Server EX>
  <WinGP API communication>
   - While the display unit is saving SRAM backup data, sometimes an error
     occurred if you saved Pro-Server EX SRAM backup data, if you ran an action
     that accesses SRAM, or if you ran an API that reads the SRAM backup data.

 7-3 Device/PLC
  <GE Intelligent Platforms Series 90-30/70 SNP-X>
   - In the Alarm Summary, setting up a bit device (bit 17 or later) did not
     display correctly.
  <Siemens AG SIMATIC S7 MPI Direct>
   - When used with the SP5000 series, sometimes a communication error occurred.
  <LS Industrial Systems Co., Ltd. XGT/XGB Series FEnet>
   - On reading a bit device, sometimes the wrong value was read.

 = V4.04.100 ===================================================================
 7-1 Editor
  (Editor)
  <Project Information>
   - Project Information did not display input Integer Variables correctly.
   - When the operand of a function block instruction is empty, displaying
     the Project Information caused GP-Pro EX to exit unexpectedly.
  <Transfer tool>
   - Speed of transferring projects over LAN is improved on WinGP, SP5000 series
     (Power Box and Open Box), and GP4000 series (except GP-4100 series,
     GP-4201TM, and GP-4301TM).
  <Project Comparison Tool>
   - The Comparison Tool stopped working when comparing a project set up
     with comments in the Movie Player.

 7-2 Display Unit
  (Runtime)
  <Barcode Reader>
   - When scanning repeatedly over a short period of time, the barcode reader
     dropped bits of data.
  <WinGP>
   - When SRAM usage exceeded 512 KB, internal device backup did not run.
  <Extended Script>
   - When using drawing functions in extended scripts, on very rare occasions
     the Display locked up.
  <FTP>
   - FTP clients could not connect to the SP5B40 unit's LAN2 port.
  <USB A Port Communication>
   - When a GP4000 series unit (except for GP-4100 series, GP-4201TM, and
     GP-4301TM) communicated at high speeds with a USB device connected
     to the USB A port, sometimes access to the USB device became unavailable.

  7-3 Device/PLC
  <Siemens AG SIMATIC S7 Ethernet>
  <Siemens AG SIMATIC S7 MPI Direct>
   - Starting Simulation slowed when using a large number of tags.
  <Schneider Electric SA MODBUS SLAVE>
   - On a newly created project where Ethernet is selected, running bit
     operations on retentive registers cleared bits in unrelated registers.

  7-4   Pro-face Remote HMI Server
  <Screen Distribution>
   - Using desktop delivery, you can now input from the software keyboard
     on the server.

 = V4.04.000 ===================================================================
 7-1 Editor
  (Editor)
  <Transfer tool>
   - Transfer Tool did not display the I/O driver name in the Transfer File
     Information.
   - The Transfer Tool's [CF/SD card connection], sometimes folder copy would
     end abruptly.
  <font>
   - There was an error in part of the Cyrillic stroke font.

 7-2 Display Unit
  (Runtime)
  <Data Display>
  <WinGP>
   - Enabling Windows touch on Windows 7 or later slowed the reaction time of
     momentary switches.
  <Enhanced Recipe>
   - In Enhanced Recipe mapped addresses, sometimes the corresponding element
     values were invalid.
   - The Enhanced Recipe's #H_RecipeResultTransfer variable did not correctly
     reflect an error.
   - System error sometimes occurred when importing a CSV file as an Enhanced
     Recipe.
  <Pro-face Remote HMI>
   - When a client in asynchronous mode and a client in synchronous mode are
     connected at the same time, and you set an invalid table number 
     in the Text Table's [Switching Control Address], changing the screen
     on the asynchronous client caused the screen on the server to change.
   - When monopolize touch was set to 0 seconds, and the client was
     disconnected while touching the screen, touch did not turn OFF.
   - Frequent screen changes from a client in asynchronous mode sometimes
     caused the screen on the server to change.
   - Even though the time elapsed for monopolize touch, sometimes
     this feature would not release touch.
   - While a client is running monopolize touch and a switch is continually
     touched on the server, even though the switch is still touched and should
     not activate anything, the switch actions run as soon as monopolize touch
     is released by the client.
   - Connecting Remote HMI for extended periods sometimes caused WinGP to crash.
   - When multiple clients connected in synchronous mode, unable to monopolize
     touch between clients.
  <Animation>
   - Color animation for image file sometimes did not work.
  <Script>
   - On the GP-4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM),
     communicating over RS-422/485 2-wire, clearing the send or receive buffer
     with the EXT_SIO_CTRL control variable sometimes disabled GP-4000 
     so it could not receive the next data.
  <Others>
   - On SP5B10, mapping the top address of the LS area to a device/PLC address
     with a bit length of 32 bits sometimes caused the internal device backup
     data to be 0xFFFF.
   - On the GP-4201TM or GP-4301TM, sometimes the screen did not recover
     from standby mode.
   - SP5B10, on the rare occasion , displayed error [RGAA001: Watchdog error].

 7-3 Device/PLC
  <Azbil Corporation Controller (CPL)>
   - Accessing Network Addresses (00000001-0000FFFFh) in DMC50 sometimes
     caused a communication error.
  <ODVA EtherNet/IP Explicit Messaging>
   - When using implicit messaging and the TCP/IP connection was terminated
     from an external device, sometimes communication could not be restored.
  <CC-Link Partner Association CC-Link Intelligent Device>
   - When using "Cyclic Transmission" and "Transient Transmission" on the screen
     at the same time, only when "Cyclic Transmission" completed could the GP
     display data values.

 = V4.03.400 ===================================================================
 7-1 Editor
  (Editor)
  <Alarm>
   - In the Editor, there was the case that a part of the Address settings get
     initialized when copying and pasting (Assign Addresses) the Read Data From
     Each Alarm settings in Block tab of Alarm settings.
  <Trigger Action>
   - There was the case that an error below displayed in error check
     when opening the project file which set the screen changing
     by using trigger action.
     [1501: Base screen Illegal address. Define a correct address.]
  <Project Converter>
   - When converting the GP-PRO/PBIII project file which includes
     the tab character in variables, the project was not able to open
     in editor.
  <Error Check>
   - There was the case that project file using SP5B40 showed a warning of
     SRAM capacity displayed during Error Check when usage capacity of SRAM
     exceeded 320 KB.
  <Startup>
   - There was the case GP-Pro EX will not run in the environment that not
     have time zone information in windows registry.
  <Version Reverter>
   - There was the case that the project used GP4301TM was not changed
     correctly from V. 4.0 to V. 3.6 or earlier by Version Reverter.
  <Project Comparison Tool>
   - When comparing the project which changed the coordinates of text
     object, a message displayed telling "Comparison item not found".

 7-2 Display Unit
  (Runtime)
  <Data Display>
   - When pop-up keypad was displayed to right edge of the SP5B10 screen, there
     was the case that it was not displayed normally.
  <Online monitor>
   - When setting the indirect devices as Device/PLC, there was the case that
     online monitor not able to connect to the display.

 7-3 Device/PLC
  <Digital Electronics Corporation General Ethernet>
   - Protocol stack error could remain indicated in passive connection opening.
  <YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet>
   - When driver version is V1.19.05, Device Data Copy Tool does not operate 
     normally in WinGP.
  <YASKAWA Electric Corporation High Speed Ethernet Server>
   - Repetitive file reading with File Read class (0x4C0) into memory could 
     cause display to stop communication.
  <CoDeSys Automation Alliance CoDeSys V3 Ethernet>
   - An abnormal application termination could occur with WinGP if "Node Name 
     (or) Address" setting was empty.
  <Beckhoff Automation GmbH TwinCAT ADS/AMS>
   - Array data in a structure in Symbol mode could not always be displayed 
     properly on screen.
   - An abnormal application termination could occur when importing a TPY file 
     in which data type information for arrays is improperly exported by TwinCAT.
  <YOKOGAWA Electric Corporation Personal Computer Link Ethernet>
   - When "Binary" is selected as "Data Code Settings", reading error history 
     with ERH device couldn't set the last byte.
  <Siemens AG SIMATIC S5 CPU Direct>
   - Some DB device settings in PLC could cause communication error with 
     versions 1.13.02 or later.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - When use multiple Tag Data with multiple node setting. The tag data may not 
     deleted normally.

 = V4.03.300 ===================================================================
 7-1 Display Unit
  (Runtime)
  <WinGP>
   - When using Start Application function, there was the case that WinGP
     operation gets slow.
  <Text Table>
   - When using Load Text Table, there was the case that certain characters
     were not displayed correctly.
  <Remote HMI>
   - Although the initial value of disconnect time after communication
     (#H_RemoteHMI_DisconnectMode) passed, there was the case that display does
     not detect it.
  <Ethernet >
   - When GP 4000 series (except for GP-4100 Series, GP-4201TM and GP-4301TM)
     received mass of multicast packets, there was the case that display
     operation gets slow.
  <LED>
   - There was the case that SP5B10 stop operating with display's LED blinking
     red and green under the conditions below.
     - When connected with USB mini-B cable (for both Box and Display).
     - When linked up/down with Ethernet Interface (Ethernet 1).
     - When connected with USB-to-serial conversion cable (CA6-USB232-01).

 = V4.03.200 ===================================================================
 7-1 Editor
  (Editor)
  <Display>
   - In the Editor, there were instances when the [Series] field listed unknown
     display types.
  <Transfer tool>
   - Using [CF/SD card connection], you could not copy multiple folders in the
     CF/SD card.

 7-2 Display Unit
  (Runtime)
  <WinGP>
   - On starting the SP5000 series (open box), sometimes all levels on the EZ
     Tower Light flashed red and emitted the buzzer.
   - On the rare occasion, repeated touches caused WinGP operation to freeze.
   - Changing to offline menu may not work.

 = V4.03.100 ===================================================================
 7-1 Editor
  (Editor)
  <Enhanced Recipe>
   - If you registered addresses in the Enhanced Recipe Group, these addresses 
     appear as used in the address setting workspace even after the enhanced 
     recipe group is deleted. Clicking the reference link for one of these 
     deleted addresses caused GP-Pro EX to exit unexpectedly.
   - On importing CSV files as recipe data, elements that exceeded the upper 
     limit were imported as invalid data.
  <Project Comparison Tool>
   - Comparing the same project set up with headers or footers on base screens 
     caused the comparison result to be [Different].
  <Display>
   - Convert Resolution did not convert labels on parts properly.
  <Graph>
   - When [Alarm Action] was [Address], [Display Direction] was [Right], [Left]
     or [Bottom], and the shape was not the default, icons for upper and lower 
     limits defined in the [Alarm Settings] did not display properly on the 
     display unit.
  <Function>
   - If you use any application other than GP-Pro EX to create alarm messages, 
     then copy and paste these messages into GP-Pro EX alarms, modifying the 
     message could cause GP-Pro EX to exit unexpectedly.
  <Device/PLC>
   - On selecting [PROFIBUS international], GP-Pro EX occasionally exited 
     unexpectedly.

 7-2 Display Unit
  (Runtime) 
  <Offline>
   - On very rare occasions, changing to offline mode distorted the screen froze
     operations.
  <File Manager>
   - On the SP5000 series Power Box (SP-5B10), viewing a file on a SD card or
     USB storage in the File Manager displayed an invalid value for the file's
     timestamp.
  <Sampling>
   - On the SP5000 series Power Box (SP-5B10), GP4000 series (except GP-4100
     series), and the LT 4000 series, performance for saving sampling data to 
     CSV was poor.
  <WinGP>
   - Continuously using the EZ Tower Light caused WinGP operations to cease.
  <Screen Transfer>
   - Transferring a project to WinGP failed when WinGP was installed on any 
     drive except C drive and the C drive's write filter was enabled.
   - Changing the display unit to offline or transfer mode while running 
     Pro-Server EX's data transfer feature caused the display unit to freeze.
  <Others>
   - On the GP-4000 series (except GP-4100 series, GP-4201TM, and GP-4301TM), if
     you turned OFF the display unit just as the display unit was powering up 
     and about to show the initial screen, on very rare occasions project data 
     on the display unit was erased, requiring you to transfer the project 
     again.
  <Pro-face Remote HMI>
   - Previously, connection passwords could use language dependent symbols.
  <SD card>
   - On very rare occasions, writing to the SD card failed on GP-4000 series
     (except GP-4100 series, GP-4201TM, and GP-4301TM).
  <Call Screen>
   - Nesting base screens and keyboard screens 10 levels or more could cause
     shifting of the display position of parts.
  <Enhanced Recipe>
   - On the SP5000 series Power Box (SP-5B10), performance for editing label 
     names in enhanced recipes was poor.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - While the application was being distributed, restarting the Remote HMI 
   Server prevented the client from connecting to the application screen.
  <Distribution Settings>
   - Even though clients could connect using fixed paths only, the 
     [Distribution Settings] screen's [Application] field accepted relative 
     paths.

 = V4.03.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When editing a project with limited free disk space, the project failed to 
     save. Then, you were unable to open the project.
  <Display>
   - PS/PE-4*00 projects showed the resolution as [1600 x 1200 pixels (UXGA)], 
     regardless of the selected screen size.
  <Enhanced Recipe>
   - Copying and pasting an Enhanced Recipe Group would either paste incorrect 
     data or cause the editor to stop working.
  <Transfer tool>
   - On GP3000 Series (excluding GP-3200 series) or GP4000 Series 
     (excluding GP4000M series and GP-4100 series), if you transferred from the 
     display unit to external storage backup data that included image fonts, 
     and then you ran the [Memory Loader] - [Create Project] command using the 
     backup data, the process would continue indefinitely.
  <Simulation>
   - When the project used many addresses, Simulation occasionally failed to 
     launch.
   - Addresses with bit length of 32 bits would appear as 16 bits in simulation.
  <Project Comparison Tool>
   - When you used the Project Converter then ran the Comparison Tool on the 
     project without saving in GP-Pro EX, the Comparison Tool stopped working.
   - Comparing a project before V3.0 with a project V3.0 or later, 
     the Comparison Tool would display differences even though there were 
     no differences in the editor.
  <I/O Driver>
   - When using the CANopen driver on LT4000 Rear Module Series, the I/O screen 
     and IEC address's ID number would appear as [2] instead of the correct 
     value of [0].
 7-2 Display Unit
  (Runtime)
  <System Menu>
   - Sometimes the system menu did not display on SP5000 (Power Box), 
     PremiumDisplay (SP5500TP / SP5600TP / SP5660TP / SP5700TP).
  <Data Display>
   - When the Data Display's data type was BCD with scale display ON, the 
     scaled value was incorrect.
  <Offline>
   - On the OpenBOX, saving any settings from the offline menu would disrupt 
     communication on COM2.
  <GP-ViewerEX>
   - Connecting the OpenBOX to run time version 3.60 would halt operations.
  <WinGP>
   - Even after disabling the WriteFilter function on the OpenBOX, 
     sometimes the file write operation was not possible from WinGP.
  <Pro-face Remote HMI>
   - On asynchronous screens, enhanced recipe list parts and 
     enhanced recipe data list parts did not appear.
  <I/O Driver>
   - When using the LT4000M's Standard Analog I/O in combination with the 
     CANopen master driver, after running the automatic project transfer 
     command, Standard Analog I/O did not run.

 7-3 Pro-face Remote HMI Server
  <Screen Distribution>
   - On Windows 8.1, when magnifying the display to more than 100%, 
     a part of the desktop or application screen did not distribute correctly.

 7-4 Device/PLC
  <Beckhoff Automation GmbH>
   - When reading the same tag data from an array as was referenced by a numeric
     display via address offset on either a window screen or previously 
     displayed base screen, the screen would freeze.
   - After selecting the data type in the address input dialog box for bit 
     screen parts, GP-Pro EX could end abruptly.
  <Pass-through Function>
   - The SP5000 Series Open Box's the USB mini-B port did not work with the
     Pass-through function.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - Starting up the Display was slowed when using the NJ series with many tag
     names with double-byte characters (such as Japanese).
  <Siemens AG SIMATIC S7 MPI Direct>
   - On the SP-5B10, when there is a communication error with the PLC, although 
     rare, operation would freeze.

 = V4.02.000 ===================================================================
 7-1 Editor
  (Editor)
  <Simulation>
   - Simulation failed to launch on Windows 8.0.
  <Transfer Tool>
   - Could not transfer project data generated by the Version Reverter and saved
     in the editor.
  <Version Reverter>
   - Not all settings were saved to the project after using the reverter, 
     occasionally causing the project to run abnormally on the display unit.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - The name of the box module SP5B10 incorrectly appeared as "SP5B40".
   - After using the offline menu to initialize user memory on the SP5000 
     (Power Box), on restart the unit would start up in Transfer mode.
  <Memory Loader>
   - After transferring the project via USB startup on the GP4000M series, 
     using the Japanese (FEP) keypad caused an error message to appear.
  <Enhanced Recipe>
   - When using the enhanced recipe feature to send recipe data from 
     the display unit to external devices, there were instances when display 
     unit operations froze.
  <Enhanced Recipe>
   - Running [Copy Recipe] in enhanced recipe parts did not copy 
     the [Security level].
  <Filing and Enhanced Recipe>
   - Using filing and enhanced recipes at the same time froze the display unit.
  <Security>
   - After entering the password or user ID in the security screen, the display 
     unit would freeze.
  <WinGP>
   - Immediately after using a USB mini-B cable to download to the SP5000 series
     (Open Box), detaching the USB mini-B cable from the Open Box would cause it
     to freeze.
  <I/O Driver>
   - After stopping and then resuming the logic, analog input and temperature 
     input did not always start back up.
   - After automatically transferring the project, there were instances when 
     the updated CANopen configuration did not download to slave units.
  <Pro-face Remote HMI>
   - The SP5000 (Power Box) would freeze if it changed to online mode in the
     middle of screen distribution.

 7-3 Pro-face Remote HMI Server
  <Communication>
   - When a client tried to reconnect with the server, the client showed the
     error message "Received an invalid packet" and the client failed to connect.

 = V4.01.000 ===================================================================
 7-1 Editor
  (Editor)
  <I/O Driver>
   - When using the STD4S driver on the LT4000 series and you set the [2 Phase
     Counter] to [0-Preload], even if you turned OFF [Synchronize Output], an
     error (RGEE101) occurred if you changed the preload value. 
  <Window>
   - When you set the [Window Type] to [Word Action] and saved the project,
     restarting the screen editor and reopening the project reverted the
     [Window Control Address] to its default value.
  <Print>
   - When the interface language was Japanese, Korean, Simplified Chinese or
     Traditional Chinese, page breaks were in the wrong spots, causing blank
     pages.
  <Logic>
   - When you made subroutines with many steps, the logic program editor's
     performance would degrade.

 7-2 Display Unit
  (Runtime)
  <Historical Trend Graph>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when you displayed historical data and showed the cursor, the graph
     display was abnormal.
  <Simulation>
   - The simulation function in GP-Pro EX V4.0 had high CPU usage. 
  <Offline>
   - On the SP5000 series Open Box (SP-5B40), the screen distorted 
     when changing to offline mode.
  <Display>
   - On the SP5000 series Open Box (SP-5B40), when you set advanced display
     in the project data settings and premium display for the display module, 
     either the screen did not display as a full screen, or the screen's right
     or bottom side extended beyond view. 
  <Picture Display>
   - Just at the moment you ran a screen capture, if the unit changed 
     to offline or transfer mode, the run time would freeze.
 7-3 Device/PLC
  <Beckhoff Automation GmbH TwinCAT ADS/AMS Driver>
   - D-Script memory copy (from PLC to display) copies only the first address 
     point in [Symbol] mode.
   - Reading STRING symbols results in error in [Symbol] mode.
   - Use of offset may cause a text display to read data from a wrong address in
     [Tag] mode.
   - Data in TOD and DT arrays may not be displayed properly in [Tag] mode.
   - GP-Pro EX may abruptly be terminated if nodes in [Tag] mode and ones in 
     [Symbol] mode are mixed in one project.
   - Reading STRING symbols with more than 1414 characters in total in one 
     screen may result in error.
   - Pro-Server EX allows tag data to be created and edited which can lead to
     a mismatch with tag data in GP-Pro EX projects.
  <Panasonic SUNX FPSeries computer Link SIO>
   - Send monitor command when shutdown the path-through even if setting don't
     use monitor command.
  <OMRON CS/CJ/NJ Series EtherNet/IP Driver>
   - Couldn't display odd elements of String variables on Omron PLC NJ 
     in the Data Display.

 = V4.00.000 ===================================================================
 7-1 Editor
  (Editor)
  <Function>
   - When a project included base screens set up with parts that referenced
     other base screens, moving or copying parts took longer than expected.
  <Logic Monitor>
   - When running Online Monitor over a network, the connection failed and
     showed error "Code=8".
  <Workspace>
   - In the Address workspace, double-clicking the [Feature], [Location], or
     [Screen] column reverted the list to its default sort settings.
   - The Parts Toolbox and Shape Browser showed 65,535 colors instead
     of 65,536 colors.
  <Error Check>
   - When working with a LT4000 series project with an Italian,
     Chinese (Simplified) or Korean interface, an error appeared during
     error check even though there were no errors in the project.
   - An incorrect warning message displayed when the text table language
     did not match the parts and common settings using the text table.
   - Even if function block instructions exceeded the limit, there was no
     error at error check when [Share Local Variables in Function Blocks]
     was set to do not share.
  <Graph>
   - [Semicircle Graph] did not display correctly,
     when the display unit's [Orientation] was [Landscape].
  <Properties>
   - The blink setting was available even though the display unit did not
     support blink.
  <Enhanced Recipe>
   - If you sorted by all the items in the [Recipe Group] element list,
     ran [Undo] or [Redo], and then removed an element, the application ended
     abruptly.
  <Function Block>
   - You could not use the keyboard to assign a Timer variable, Counter
     variable, or PID variable to an instructions's input or output operand.
  <Version Reverter>
   - When you saved a project with GP4201TM(Modular Type) to version
     [V3.00 - V3.01], you could not open the project in the associated
     version of GP-Pro EX.
   - When you saved a project with GP-4301TM(Modular Type) and [Enable
     Ethernet Multilink] to version [V3.00 - V3.01], sometimes opening the
     project in the associated version of GP-Pro EX disabled [Enable Ethernet
     Multilink].
   - Even though you were not supposed to be able to save a
     GP-4201TM(Modular Type) or GP-4301TM(Modular Type) project set up with
     tag data on its PLC/Device to version [V3.00 - V3.01], the save operation
     may have run.
  <Transfer Tool>
   - When running [Compare Project], some of the differences in the [Text
     Table] settings appeared as [Exclusive Screen] differences.
   - After running [Reduce Images to 16-Bit Colors] on an image part set to
     16,777,216 colors, running [Transfer Project] caused an error message to
     display.
  <Project Converter>
   - There were cases when you could not convert sampling groups associated
     with a historical trend graph that was grouped with other objects.

 7-2 Display Unit
  (Runtime)
  <Offline>
   - After saving a project without changing any offline mode settings, there
     were some differences when compared with a project with the same settings.
   - After initializing SRAM from the WinGP offline menu, an error occasionally
     occurred when running CF->SRAM Transfer or SD->SRAM transfer.
   - On the LT3300 series and GP3300 series (except for GP-3310, GP-3360),
     the [Main Unit]-[Ethernet Local Settings] did not show the MAC address
     correctly.
   - When real-time printing of the alarm setting is enable ,if it shifts to 
     offline mode after alarm generating, operations would freeze.
  <Security>
   - When security was enabled, you could not use Internet Explorer to access 
     the FTP server.
  <Picture Display>
   - When using image fonts in a picture display, running the [Clearing action]
     occasionally erased area outside the picture.
   - The mark display was occasionally distorted when two or more picture 
     displays showed mark images on the same screen.
   - On the GP-4201TM or GP-4301TM, when you used a picture display to move 
     a mark, occasionally after-images remained of the mark in its original 
     position.
  <EZ Fingerprint Recognition Unit>
   - Updating unregistered fingerprint data appeared as a normal operation 
     when it should have been an error.
  <Memory Loader>
   - After using the Transfer Tool to download Memory Loader backup data, 
     comparison showed differences between internal data and storage.
  <Screen Transfer>
   - When the write filter setting was enabled and you transferred to WinGP, 
     on restarting WinGP, it started in transfer mode. 
   - Project transfer failed after you disabled the write filter setting 
     while WinGP was running.
   - Operations would freeze when transferring a project while there was 
     a Pro-Server EX data transfer error.
  <CSV Display>
   - Editing or saving the CSV file in the CSV display occasionally changed 
     the CSV file name.
  <Operation Log>
   - Running the SD->SRAM transfer command from the offline menu occasionally 
     added invalid content in the operation log.
  <Message Display>
   - The first time after a screen change the message display showed correctly,
     but messages did not update.
  <I/O driver>
   - On the LT4000 series with the STD4S driver, even though you ran the PCHQ 
     (pulse catch input clear) instruction, it occasionally did not clear 
     the status of the pulse catch.
   - On the LT4000 series with the STD4S driver, even though you ran the HSCQ 
     (stop high-speed counter) instruction, it occasionally did not change 
     the status of the high-speed counter.
   - On the LT4000 series with the STD4S driver, after the special I/O parameter
     error's system variable (#L_ExIOSpParmErr) showed an error status,
     you were unable to change it back to normal status.
  <Date/Time>
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM)
     the date/time would reset to "2000/00/00 00:00:00".
   - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM),
     when the SD card was not mounted and the SD Card Free Space (Memory Card
     Setting) was enabled, for 5 seconds after booting, the date and time showed
     "2000/00/00 00:00:00".
  <Others>
   - When there are frequent communication errors with the PLC, although rare,
     operations would freeze.
   - On WinGP, when the save destination for historical data was a folder and 
     the free disk space was zero, an error message did not appear even though 
     backup data could not save.
 
 7-3 Device/PLC
  <Digital Electronics Corporation Memory Link>
  <Digital Electronics Corporation General Ethernet>
  <Digital Electronics Corporation General SIO>
  <Schneider Electric SA MODBUS slave>
   - The Wait To Send time observed in communication may not be the same as
     the value which has been set in the Wait To Send parameter.
  <OMRON Corporation CS/CJ/NJ Series EtherNet/IP>
   - For a connection with multiple NJ Series which share the same Tag Data,
     Numeric Data Displays do not display the correct PLC data. 
  <Siemens AG SIMATIC S7 MPI Direct>
   - On startup of the display unit, an SIO Error may occur rarely.
  <Schneider Electric SA Uni-Telway>
   - A Timeout Error may occur. 
   - When the "Reference / Channel" is set to a value other than 0 
     in the Device-Specific Settings, communication does not work. 
  <Rockwell Automation, Inc. EtherNet/IP>
   - Depending on the connection configuration,
     part of the Equipment Module Tag Data that is listed in 
     the Connection Manual is not imported. 

================================================================================
Copyright (C) 2018 Schneider Electric Japan Holdings Ltd. All Rights Reserved.
"The Terms and Conditions of Software License Agreement" of Schneider Electric 
Japan Holdings Ltd. do not apply to Adobe Systems products.
All product names in this document are registered trademarks or trademarks of
their respective owners.
Pro-face is a registered trademark of Schneider Electric Japan Holdings Ltd. 
in Japan, U.S.A., Canada, Europe and other areas and countries.
No part of this document may be used or reproduced without permission.
****************************  End of Release Note  *****************************