| Error Code* | Error Messages | Cause and Solution |
|---|
0xC0B00051
SAAA081
-1062207407
3232759889 | The setting contents of the network project are abnormal. | Please execute Consistency Check with 'Pro-Studio EX'. After correcting detected errors, please transfer the network project again. |
|
|
|
0xC0B00052
SAAA082
-1062207406
3232759890 | The file is broken. | The project file is broken. Please use the file additionally saved in 'GP-Pro EX'. |
|
|
|
0xC0B00053
SAAA083
-1062207405
3232759891 | Cannot handle this file version. | The project file was saved in a new format. Please use the latest 'Pro-Studio EX'. |
|
|
|
0xC0B00054
SAAA084
-1062207404
3232759892 | Cannot handle this file type. | The project file was saved an unsupported format. Please use the latest 'Pro-Studio EX'. |
|
|
|
0xC0B00060
SAAA096
-1062207392
3232759904 | Cannot open the network project file. The file does not exist or you don't have the access right. | Please check the specified file and the specification method of the network project file. |
|
|
|
0xC0B00061
SAAA097
-1062207391
3232759905 | Cannot open the network project file. | Please check the specified file and the specification method of the network project file.If they are correct, and the phenomenon still reoccurs even if you restart the PC, please install 'Pro-Sever EX' again. |
|
|
|
0xC0B00062
SAAA098
-1062207390
3232759906 | The network project file is broken. Cannot read. Please confirm whether the file you specified is a real network project file. | Please check whether the specified file is not broken. |
|
|
|
|
0xC0B00063
SAAA099
-1062207389
3232759907 | Cannot write to the network project file. | Please confirm that the disk space is sufficient, and that you have the access right to the file/folder. |
|
|
|
0xC0B00064
SAAA100
-1062207388
3232759908 | The file is not a network project file, or its version is old. Cannot read the data. | Please specify a network project file. If you have already specified one, it may have been broken. Please specify an undamaged network project file. |
|
|
|
0xC0B00065
SAAA101
-1062207387
3232759909 | The specified device was not found in (XX). It may have been deleted or renamed. Please check it again. (XX: NODE name) | Please confirm the Device/PLC, following the direction of the message. |
|
|
|
0xC0B00066
SAAA102
-1062207386
3232759910 | The specified NODE (XX) has not been registered. There is a conflict. Please check it again. (XX: NODE name) | When you delete a Node, please review all the things using the Node. (1) Data Transfer feature (2) Cache feature (3) ACTION feature (4) Trigger Condition etc. Once a Node is deleted, even if you add the same Node, the settings remain disabled (They are not restored). Please check the settings again. |
|
|
|
|
0xC0B00067
SAAA103
-1062207385
3232759911 | The specified NODE info is incorrect. No NODE info exists. |
|
|
|
0xC0B00068
SAAA104
-1062207384
3232759912 | The device setting in the system area of the specified node has an error. Please check the device you set. | In the case of the GP3000 Series node, if it has one or more device other than memory link, you must specify a system area device/PLC and a system area device address. Please confirm the specifications.
|
|
|
|
0xC0B00069
SAAA105
-1062207383
3232759913 |
(XX: XX) is invalid as a device/symbol. Cannot analyze. (XX: Device/Symbol name) | Please confirm the symbol, following the direction of the message. |
|
|
|
0xC0B0006A
SAAA106
-1062207382
3232759914 | The trigger condition of (XX) is invalid. The node involved in this trigger condition may have been deleted. Please check it again. (XX: Trigger condition name) | Please confirm the trigger condition, following the direction of the message. |
|
|
|
0xC0B0006B
SAAA107
-1062207381
3232759915 | There is a conflict with communication functions because the action data was deleted. Please check it again. | Please confirm the action settings, following the direction of the message. |
|
|
|
|
0xC0B0006C
SAAA108
-1062207380
3232759916 | The network setting is broken. | Please review the network settings. |
|
|
|
0xC0B0006D
SAAA109
-1062207379
3232759917 | There is a conflict with symbol info because the device was deleted. Please check it again. | Deleting a Device/PLC disables all the related information. Please review all the information related to the Device/PLC. Once a Device/PLC is deleted, even if you add the same Device/PLC, the settings remain disabled (They are not restored). Please check the settings again. |
|
|
|
0xC0B0006E
SAAA110
-1062207378
3232759918 | There is a conflict with symbol info because the node was deleted. Please check it again. | Please confirm the symbol, following the direction of the message. |
|
|
|
|