[Communication Drivers] Device Data Copy Tool

Summary

Last update:2021/03/23

Details

Note:
Precautions for adding a new driver onto Windows Vista/7
TitleDevice Data Copy Tool
Applicable SoftwareGP-Pro EX Ver. 2.20.000 or later

To check your version, go to the "Help" menu -> "Version Info".
Compatible OS
  • Windows XP 32bit OS (any Service Pack, any edition)
  • Windows Vista 32bit OS (Service Pack2 or later, any edition)
  • Windows 7 32bit/64bit OS (Service Pack1 or later, any edition)
  • Windows 8.0 32bit/64bit OS (any Service Pack, any edition)
  • Windows 8.1 32bit/64bit OS (any Service Pack, any edition)
  • Windows 10 32bit/64bit OS (Home, Pro, Enterprise)
Compatible DriverYASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet driver Ver. 1.12.00 or later
(To use MP3000 series, Ver. 1.17.02 or later is required.)		SHIBAURA MACHINE CO., LTD.(OLD: TOSHIBA MACHINE) TC Series (TCmini/TC200) driver Ver. 1.11.01 or laterSHIBAURA MACHINE CO., LTD. TC/TS Series Ethernet V1.11.00 or later
Data Copy Tool VersionVer. 1.08.03Ver. 1.03.03Ver. 1.10.00
To check your version, go to the “MENU” screen on Device Data Copy tool.
Related Devices
  • MP2000 Series
  • MP3000 Series
  • Σ-7C controller section
  • TC200 Series
  • TC200S Series
  • TCmini Series
  • TS5000 Series
  • TCmini Series
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required Data Copy Tool versions for different models are listed below.
 
ModelYASKAWA
MP Ethernet/MECHATROLINK
Required tool version		SHIBAURA MACHINE CO., LTD.
(OLD: TOSHIBA MACHINE)
TC Series(TCmini/TC200)
Required tool version		SHIBAURA MACHINE CO., LTD.
TC/TS Series Ethernet
TC/TS Series Ethernet
Required tool version
GP3000 SeriesVer. 1.00.00 or laterVer. 1.00.00 or later－
LT3000 SeriesVer. 1.00.00 or laterVer. 1.00.00 or later－
GP4100 SeriesGP4104Ver. 1.01.00 or later－Ver. 1.00.00. or later
GP4114Ver. 1.07.03 or later－Ver. 1.00.00. or later
GP4105、GP4106、GP4107－Ver. 1.00.01 or later－
GP4115、GP4116－Ver. 1.03.03 or later－
GP4000M SeriesVer. 1.01.00 or laterVer. 1.00.02 or laterVer. 1.00.00. or later
GP4000 SeriesVer. 1.01.00 or laterVer. 1.00.02 or laterVer. 1.00.00. or later
LT4000M SeriesVer. 1.04.02 or laterVer. 1.02.03 or laterVer. 1.00.00. or later
SP5000 SeriesVer. 1.05.02 or laterVer. 1.02.03 or laterVer. 1.00.00. or later
SP5000X SeriesVer. 1.08.04 or laterVer. 1.03.03 or laterVer. 1.00.00. or later
GP4000E SeriesVer. 1.06.02 or laterVer. 1.03.03 or laterVer. 1.00.00. or later
IPC Series for WinGPVer. 1.10.00 or laterVer. 1.00.00 or laterVer. 1.00.00. or later
General PCs for WinGPVer. 1.10.00 or laterVer. 1.00.00 or laterVer. 1.00.00. or later
Updated Contents

[Ver. 1.08.03]  (Dec. 15, 2016)

  • Sigma-7C is supported.( The Display communicates with the Σ-7C controller section.)

[Ver. 1.03.03]  (Aug. 31, 2020)

The following settings were added:
  • Change in maker name. TOSHIBA MACHINE Co., Ltd. → SHIBAURA MACHINE CO., LTD.

[Ver. 1.00.00]  (Mar. 23, 2021)

  • New
Update History

[Ver. 1.07.03]  (Apr. 08, 2016)

  • Added support for individual transfer.

[Ver. 1.06.02]  (Sep. 5, 2014)

  • Added support for new transfer files. (Maintenance Monitor Setting, FTP Client definition.)

[Ver. 1.05.02]  (Aug. 22, 2012)

  • MPU-01, CPU201(SUB) are supported

[Ver. 1.04.02]  (Apr. 6, 2012)

  • Compressed project file for MP2000 Series is supported.
  • The following issue is fixed: When a communication driver Ver. 1.16.02 or earlier is used, GP cannot operate normally.

[Ver. 1.03.01]  (Mar. 9, 2012)

  • MP3000 Series is supported.
  • Compressed project file for MP3000 Series is supported.
The following issues are fixed:
  • Touch operator interface cannot dump files when referring to nonexistence diagrams on a program.
  • Returning to driver selection repeatedly in the menu screen may disable the touch operation.

[Ver. 1.01.00]  (Jul. 27, 2010)

  • Selecting the register data transfer when loading is supported.
  • MECHATROLINK-III is supported.
  • GP4100 Series is supported
  • GP4000M Series is supported
  • GP4000 Series is supported.

[Ver. 1.00.00]  

  • New

[Ver. 1.03.03]  (Sep. 5, 2014)

  • Now supports VGA display.
    * To use a VGA display Ver. 4.02.000 or later of GP-Pro EX is necessary.

[Ver. 1.02.03]  (Mar. 9, 2012)

The following issues are fixed:
  • Although CPU stops when a data file is downloaded, the CPU stop confirmation message may be displayed.
  • Although CPU is in the RUN status when a data file is downloaded, download is performed without displaying the CPU stop confirmation message and the communication error may occur.

[Ver. 1.00.02]

　　　　　　　
  • GP4000 Series is supported.
The following issue is fixed:
  • If "Subroutine Command", "Task Command" and "Interrupt Command" are used for a ladder program, a sequence error occurs after data is transferred to a PLC.
  • When a ladder program is uploaded, data is read in a state where the L/H of the 3rd or later address values in the T/C setting value is reversed.

[Ver. 1.00.01]

  • GP4100 Series is supported.
  • GP4000M Series is supported.

[Ver. 1.00.00]

New		-
 

How to install (This is a self-extracting file.)

  1. Please confirm that the applicable software is installed.
    Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

document
Device Data Copy Tool
EXDriver_DataCopy_11.exe
242.08 MB (253,840,472 Byte)
document
YASKAWA Electric Corporation Device Data Copy Tool Guide
Manual_yas_tsee_en.pdf
391.90 kB (401,310 Byte)
document
TOSHIBA MACHINE CO., LTD. Device Data Copy Tool Guide
Manual_tsm_tsee_en.pdf
738.38 kB (756,105 Byte)
document
SHIBAURA MACHINE CO., LTD. Device Data Copy Tool Guide
Manual_sbm_tsee_en.pdf
764.07 kB (782,408 Byte)