Details
- Note
- Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time
| Title | Schneider Electric SA MODBUS TCP Master Driver | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Version | Ver. 1.14.08 | |||||||||||||||||||||||||||||||||||||||||
| Supported Software | The required versions of software for this driver installer are as follows. GP-Pro EX Ver. 2.10.000 or later Pro-Server EX Ver. 1.30.000 or later You can check your version by "Help" function -> "Version Info". | |||||||||||||||||||||||||||||||||||||||||
| Supported Devices |
| |||||||||||||||||||||||||||||||||||||||||
| Supported Units | Required versions depend on models. Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below
| |||||||||||||||||||||||||||||||||||||||||
| Device/PLC Connection Manual | For details, please read the "Device/PLC Connection Manual" in the lower part of this page. For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual". | |||||||||||||||||||||||||||||||||||||||||
| Updated Content |
[Ver. 1.14.08] （Jan. 20, 2023） The following defect is fixed:
| |||||||||||||||||||||||||||||||||||||||||
How to install (This is a self-extracting file.)
- Prior to installation, be sure to close all software applications that are running.
-
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file’s icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, run GP-Pro EX.
- Select [Schneider Electric SA] for "Manufacturer" and [MODBUS TCP Master] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update History
[Ver. 1.14.08] （Jan. 20, 2023）
The following defect is fixed:- Downloading from the ladder software to the PLC while the PLC is in communication with the HMI would sometimes cause a communication error that the HMI could not recover from.
[Ver. 1.14.07] (Jun. 28, 2018)
The following functions were added:- IO module for M221 is supported. (Revise the connection manual)
[Ver. 1.14.07] (Apr. 26, 2018)
The following device was supported:- Modicon M221 Series is supported.
[Ver. 1.13.07]
The following functions were added:- LT3000 Series is supported.
- USB-RS 422/485 conversion adapter is supported.
[Ver. 1.12.07]
The following settings were added or revised:- GP4000 Series is supported.
- A maker name is revised from “Schneider Electric Industries” to “Schneider Electric SA”.
[Ver. 1.12.06]
The following setting was added:- GP4100 Series is supported.
[Ver. 1.11.05]
The following settings were added:- Support for Device Monitor.
* Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor. - Lower Security Level is supported.
- Single Bit manipulation to Coil/Discrete Input is supported.
[Ver. 1.10.04] (Jul. 31, 2006)
The following settings were added:- IEC61131 address Syntax is supported.
[Ver. 1.10.03] (May 12, 2006)
The following settings were added:- "Bit manipulation (set/reset) to Holding Register" setting.
Summary
Last Update : 2023/01/20