[Communication Drivers] OMRON Corporation CS/CJ Series Ethernet Driver

Summary

Last update: 2020/12/04

Details

Note:
Precautions for adding a new driver onto Windows Vista/7
TitleOMRON Corporation CS/CJ Series Ethernet Driver
VersionVer. 1.16.08
Applicable SoftwareGP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000以上

You can check your version by”Help”function→”Version Info”.
Related Devices
  • CS1 Series
  • CJ1 Series / CJ2 Series
  • CP1 Series / CP2E Series
  • NX1 Series
Related UnitsRequired versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.

Required driver versions for different models are listed below
ModelRequired driver version
GP3000 SeriesVer. 1.00.02 or later
LT3000 SeriesVer. 1.16.05 or later
GP4100 SeriesGP4104Ver. 1.15.04 or later
GP4114Ver. 1.16.06 or later
GP4000M SeriesVer. 1.15.05 or later
GP4000 SeriesVer. 1.15.05 or later
LT4000M SeriesVer. 1.16.05 or later
SP5000 SeriesVer. 1.16.06 or later
SP5000X SeriesVer. 1.16.06 or later
IPC Series for WinGPVer. 1.11.03 or later
General PCs for WinGPVer. 1.11.03 or later
Device/PLC Connection ManualFor details, please read the "Device/PLC Connection Manual" in the lower part of this page.
For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual(link is external)"
Updated Contents

[Ver. 1.16.12] (Nov. 30, 2020)

The following settings were added:
  • CP2E Series was supported.
 

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
  3. After the installer starts, follow the instructions given on each screen.
  4. After installation, execute GP-Pro EX.
  5. Click on the Device/PLC area’s [OMRON Corporation] selection and select [CS/CJ Series Ethernet].
When using the driver, be sure to refer to the Device Connection Manual PDF.
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

document
Installer
EXDriver_OMR_FINE.exe
926.59 kB (948,824 Byte)
document
Device/PLC Connection Manual
Manual_omr_fine.pdf
1.56 MB (1,637,001 Byte)

Update history:


[Ver. 1.16.08] (Nov. 30, 2020)

The following settings were added:
  • CP2E Series was supported.


[Ver. 1.16.05] (Jul. 27, 2012)

The following settings were added:
  • LT3000 Series is supported.


[Ver. 1.14.04] (Mar. 24, 2009)

The following issue was corrected:
  • When continue the state display is not connected with PLC, display cannot shift to offline on UDP setting.


[Ver. 1.14.03] (Oct. 30, 2008)

The following settings were added:
  • Support for CJ2 series.
  • Support for Ladder Monitor. (Connection to CS1/CJ1/CP series only.)
    * Not supported in CJ2 Series.
    * Ver. 2.00.000 or later version of GP-Pro EX and "OMRON Corporation CS/CJ Series PLC Ladder Monitor" (Model: EX-LADM-OMR-CJ01) are necessary to use the Ladder Monitor.


[Ver. 1.12.03] (Jan. 17, 2008)

The following setting was added:
  • Support for Pass Through (GP3000 Series only)
    →Pass-Through Function
    * Ver. 2.50.000 or later version of GP-Pro EX are necessary to use Pass Through with WinGP.


[Ver. 1.11.03] (Jan. 9, 2007)*Included in the product

The following setting was added:
  • Support for DeviceMonitor
    * Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a DeviceMonitor.