Schneider Electric EZ Tower Light USB Connection Type Monolithic Device Connection Sample

Summary

You can set up the operation of EZ Tower Light (such as color of lighting, blinking speed, buzzer) on HMI.

Details

Last Updated : Apr. 26, 2018
Posted: Mar. 22, 2013

Supported Connection Devices

ManufacturerCategorySeriesModel
Schneider ElectricEZ Tower LightUSB Connection Type Monolithic EZ Tower LightPFXZCETWHA1 / PFXZCETWW1

Target HMI Devices

SeriesModel *1Screen Editor
SP5000 Series
WVGA (800×480)		Box module: SP-5B10
Display module: SP-5400WA		GP-Pro EX Ver. 4.00.000 or later
SP5000 Series
VGA (640×480）		Box module: SP-5B10
Display module: SP-5500TP
GP4000 Series
VGA (640×480）		GP-4501T
GP4000 Series
QVGA (320×240）		GP-4301T
GP4100 Series
Color Model (480×272）		GP-4114T *2GP-Pro EX Ver. 4.05.000 or later

*1 The display type of this sample project file is set to the above model. Please change the model to the type of you are using. For details, refer to the Technical Guide in the downloaded file.

*2 EZ Tower Light can not be used with the GP4100 Series monochrome model.

Features

  1. Display control of EZ Tower Light
    Controls lighting color, blink rate, and buzzer of EZ Tower Light, in accordance with an input signal depending on the settings.
    Operation can be selected from the four options below.*
    (A direct mode, a normal mode and a combination mode cannot be used with each other on one project.)
    ・Direct word mode: Lighting color, blink speed, and buzzer can be controlled by inputting word data from an external device (e.g. PLC).
    ・Direct bit mode: Lighting color, speed, and buzzer can be controlled by inputting bit data from an external device (e.g. PLC).
    ・Normal mode: Based on the setting on a touch panel (Lighting color, speed and buzzer), lamp and buzzer are operated respectively by inputting bit data from an external device (e.g. PLC).
    ・Combination mode: Based on the pattern setting on a touch panel (Lighting color, speed and buzzer), operation is made in combination of lamp and buzzer by inputting a numeric value (0 - 16) from an external device (e.g. PLC).
     
  2. Setting Screen
    EZ tower lights operation setting (flashing lights color, speed, and buzzer).
    Save the setting data onto USB memory or SD card and reuse it.
     
  3. Monitor Screen
    Display the current status of lighting on the screen.
 

We do not guarantee that the operation of this sample will be uninterrupted or error-free.

Terms of use / Cautions

Please acknowledge the following terms of use before you use our download service.
Download of any file signifies your agreement to the terms of use.
Terms and conditions

Download file

document
For SP-5400WA WVGA (800 x 480)
DeviceSample_connection_sp5400_wv_SE-EZTowerLight_ml_V134.exe
3.69 MB (3,868,432 Byte)
document
For SP-5500TP VGA (640 x 480)
DeviceSample_connection_sp5500_v_SE-EZTowerLight_ml_V134.exe
3.68 MB (3,863,416 Byte)
document
For GP-4501T VGA (640 x 480) / GP-4301T QVGA (320 x 240)
DeviceSample_connection_gp4000_SE-EZTowerLight_ml_V132.exe
3.85 MB (4,039,894 Byte)
document
For GP-4114T (480 x 272)
DeviceSample_connection_gp4114_SE-EZTowerLight_ml_V141.exe
3.49 MB (3,663,744 Byte)

Update History

SP5000 Series WVGA:

[Ver. 1.34] (Apr. 13, 2018)
- Change judgement method of USB memory
- Change judgement method of SD card

[Ver. 1.33] (Mar. 20, 2015)
fixed version

[Ver. 1.32] (Jul. 18, 2014)
New

SP5000 Series VGA:

[Ver. 1.34] (Apr. 13, 2018)
- Change judgement method of USB memory
- Change judgement method of SD card

[Ver. 1.33] (Mar. 20, 2015)
New

GP4000 Series:

[Ver. 1.32] (Apr. 13, 2018)
- Change judgement method of USB memory
- Change judgement method of SD card

[Ver. 1.31] (Jan. 17, 2014)
fixed version

[Ver. 1.1] (Jul. 27, 2013)
New

GP4100 Series:

[Ver. 1.41] (Apr. 13, 2018)
Change judgement method of USB memory

[Ver. 1.4] (Jun. 6, 2016)
New