Posted: May 17, 2017
Thank you very much for your continuous use of Pro-face products.
We have confirmed the following symptoms on OMRON CS/CJ/NJ series Ethernet/IP driver.
The symptom and corrective measures for this problem are indicated below.
We sincerely apologize for any inconvenience this may cause you.
Symptom Descriptions
Symptom 1: A part of tag is not imported when importing a tag file after OMRON CS/CJ/NJ Ethernet/IP driver is updated from Ver. 1.16.11 to Ver. 1.16.12.
Symptom 2: HMI might not start correctly if transferred project file has two or more tag data.
Applicable Communication Driver
The following communication driver is applicable.
| Driver Name | OMRON CS/CJ/NJ series Ethernet/IP |
|---|---|
| Target Version *1 | Symptom 1: Ver. 1.16.12 Symptom 2: Ver. 1.16.11 to Ver. 1.16.13. |
| How to confirm the version | Peripheral List in GP-Pro EX or Offline menu of HMI |
*1 OMRON CS/CJ/NJ Ethernet/IP driver Ver. 1.16.12 is included in the installation module of GP-Pro EX Ver. 4.06.300.
Measures
Please download the module of OMRON CS/CJ/NJ Ethernet/IP driver (Ver. 1.16.14) from the following page and apply it to your GP-Pro EX.
OMRON CS/CJ/NJ Ethernet/IP driver Ver. 1.16.14
* To download the module, free member registration is required.Inquiry
If you have any inquiries, please contact our sales office in your region.
For contact information, please refer to the "Inquiry" page.