PFXSP5B00 + PFXZCDADEXP1

Standard product information
Family
Data Collection Devices
Series
Multi-Converter
Model
PFXSP5B00 + PFXZCDADEXP1
Specification
Specifications

Electrical Specifications

Model SP5000 (Standard Box)
Model No. (Base Module) PFXSP5B00
Model No. (Adapter) PFXZCDADEXP1
Rated input voltage 12 to 24Vdc
Input voltage limits 10.8 to 28.8Vdc
Voltage drop 12Vdc: 1.25ms or less
24Vdc: 5ms or less
Power consumption Max (with Box Module) 19.5W or less
Max (adapter only) 2.0W or less
In-rush current 30A or less
Voltage endurance 1,000 Vac, 20 mA for 1 minute
(between charging and FG terminals)
Insulation resistance 500 Vdc, 10 MΩ or more
(between charging and FG terminals)
 

Environmental Specifications

Model SP5000 (Standard Box)
Model No. (Base Module) PFXSP5B00
Model No. (Adapter) PFXZCDADEXP1
Surrounding air temperature 0 to 60 °C (32 to 140 °F)
(For a floor installation, 0 to 55 °C [32 to 131 °F])
Storage temperature -20 to 60°C
Surrounding air and storage humidity 10 to 90% RH (non-condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree For use in Pollution Degree 2 environment
Corrosive gases Free of corrosive gases
Atmospheric pressure (Operating altitude) 800 to 1,114 hpa (2,000 m [6,561 ft] or lower)
Vibration resistance IEC/EN 61131-2 compliant
5 to 9 Hz Single amplitude 3.5 mm (0.14 in)
9 to 150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
Shock resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Noise immunity Noise voltage: 1,000 Vp-p
Pulse duration: 1 µs
Rise time: 1 ns
(via noise simulator)
Electrostatic discharge immunity Contact discharge method: 6 kV (IEC/EN 61000-4-2 Level 3)
 

Memory

Model SP5000 (Standard Box)
Model No. (Base Module) PFXSP5B00
Model No. (Adapter) PFXZCDADEXP1
Application Memory When using GP-Pro EX: 
Media: FLASH EPROM
Screen Area *1: 64MB
User Font Area: 8MB
Logic Program Area: 132KB (Equivalent to 15,000 steps）
Free Space: None

Removable System: No
Backup Memory When using GP-Pro EX: 
Screen Area: NVRAM 320KB
Variable Area: NVRAM 64KB

Battery: No *2
Control Memory 64KB

*1 Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.

*2 SP5000 Series can retain NVRAM (backup memory) and RTC (clock data) without any batteries. But, when no power is supplied for 100 days or more, it's necessary to additionally mount this option item to retain RTC (clock data).

Interface Specifications

Model SP5000 (Standard Box)
Model No. (Base Module) PFXSP5B00
Model No. (Adapter) PFXZCDADEXP1
Serial (COM1) RS-232C
Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, Even or Odd
Data Transmission Speed: 2,400 to 115,200 bps
Connector: D-Sub9 (plug)
Serial (COM2) RS-422 / 485
Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, Even or Odd
Data Transmission Speed: 2,400 to 115,200 bps, 187,500bps (MPI)
Connector: D-Sub9 (plug)
USB (Type A) *3 Conforms to USB 2.0 (Type A) x 2
Power supply voltage: 5 Vdc ±5 %
Maximum Output Current: 500 mA/port
Communication distance: 5 m [16.4 ft.]
USB (mini B) Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
Ethernet IEEE802.3i / IEEE802.3u
10BASE-T / 100BASE-TX
Connector: Modular jack (RJ-45) x 2
Ethernet (Adapter side) IEEE802.3i / IEEE802.3u
10BASE-T/100BASE-TX
Connector: Modular jack (RJ-45) x 1
SD Card SD Card Slot (Storage) x 1
CFast Card -
Video -
Sound Input -
Sound Output -
AUX Output -

*3 When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader. If you connect multiple devices that are the same type, only the first device will work.

Structural Specifications

Model SP5000 (Standard Box)
Model No. (Base Module) PFXSP5B00
Model No. (Adapter) PFXZCDADEXP1
Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).
Cooling method Natural air circulation
External dimensions W189 x H134 x D67mm (7.44 x 5.28 x 2.63 in)
Weight 1.65kg (3.64 lb) or less
 

External Dimensions

with Box Module

PSA Dimensions
1 Front
2 Left
3 Right
4 Top
5 Bottom