PFXZCGEUUE1

Standard product information
Family
Peripheral Equipment
Series
EZ Series
Model
PFXZCGEUUE1
Global Code
PFXZCGEUUE1
Product Features
USB option (Add a LAN port)
Specification
Specifications
 

EZ LAN Adapter

General Specifications

Model PFXZCGEUUE1
Supported standards and regulations                  
Supported software GP-Pro EX Ver. 4.08 or later
Ethernet I/F Modular Jack (RJ-45), IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX
USB I/F Type A (plug), USB 2.0 High-Speed (480Mbps)

Electrical Specifications

Power Supply
Rated input voltage 5Vdc (powered from USB bus)
Input voltage limits 4.75 to 5.25Vdc
Power consumption 0.63W or less

Environmental Specifications

Physical environment
Ambient air operating temperature 0 to 55℃ (32 to 131 °F)
Storage temperature -20 to 60℃ (-4 to 140 °F)
Ambient air and storage humidity 10 to 90% RH (non condensing, wet bulb temperature 39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree For use in Pollution Degree 2 environment
Atmospheric pressure (Operating altitude) 800 to 1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical environment
Vibration resistance IEC/EN 61131-2 compliant
5 to 9 Hz Single amplitude 3.5 mm (0.14 in)
9 to 150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
Concussion resistance IEC/EN 61131-2 compliant (147 m/s2, X, Y, Z directions for 3 times)
Electrical environment
Electrical fast transient/burst IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports
Electrostatic discharge immunity Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

External Specifications

External dimensions W105 x H40 x D27 mm (W4.13 x H1.57 x D1.06 in.)
Cable length 0.5 m (1.64 ft) (including connections)
Weight 100 g (0.22 lb.) or less

External Dimensions



* This product can be attached on the rear side of the display unit or to a panel other than the display unit. Refer to the installation guide for further information.