{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}
{}
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Did this answer your question?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}
Search FAQs
OS does not start up for PS365xA-T42
Applicable Models
PS365xA-T42 (Configuration of internal HDD with installed OS and CF card without OS)
When PS365xA-T42 does not preceed to start up because the error message, "Non-System disk or disk error～" is displayed, please follow the instructions below.
■ Instruction
1.
Connect an USB keyboard with a main unit.
2.
Turn ON the power of the main unit, and then press [ F2 ] key at once.
3.
After BIOS screen is displayed, press [ -> ] key, and then move to [ Boot ] tab.
4.
Point the cursor at [ SATA DEV: ] with [ ↓ ] key. Next, every time [ + ] key is depressd, the order of priority gets higher. Set [ 1: SATA DEV: ] as the diagram below indicates.
5.
After pressing [ F10 ] key, select [ Yes ] and save to quit. That's all.
MEMO
For PS365xA-T42, a CF card is set at the higher order of start-up than an internal HDD because of factory setting. Therefore, when a CF card with no OS is connected, OS does not start up from HDD.
