{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}
{}
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Did this answer your question?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please check the box"}}}
Search FAQs

STW6000/ How to update the system?

Please find following instructions.
1. Prepare USB storage (less than 32GB space, FAT32 Format)
2. Download System update module from below link and put it to the USB storage root folder.
Download file
3. Insert the USB storage to Target and “Power On” the Target.
image
4. Enter Password.
image
(The above start page is different depending on the user environment. )

5. Enter password and touch “Login”.
（Default password is “Admins”）
image

6. Enter "Configuration Menu" and touch "+ System"
image
If you cannot find “Configuration” on the display,
please visit below FAQ: STW6000 / How to visit “Configuration Menu”(FA405130).

7. Go to "Update System" and touch "Update" Button.
image

8. Make sure to insert the USB storage on Target and touch “OK” button.
image

9. Enter Update process and wait for about 3 minutes.
image

Attention: If screen is showing “cannot read data from USB storage...”
Check your USB storage data as below.
-    BOOTLD0D.SYS / WEBOS0D.SYS (these 2 files in your USB storage root folder)
-    USB storage device Capacity (FAT32 or less than 32 GB).

10. Touch “OK” button and it will be required to reboot automatically.
HMI will be updated with new system after the rebooting.
image

11. Enter “Configuration Menu” and touch “+ Information”
image

12. Check  "Version" whether it is the same version you downloaded.
image