[Communication Driver] Fuji Electric Co., Ltd. MICREX-SX Series SIO Driver

 

Update History

[Ver. 1.13.07] (Jul. 12, 2012)

The following functions were added:

• General Interface Capsule FFK120A-C10 is supported.
• USB/RS-422/485 Conversion Adapter is supported.
  * To use USB/RS-422/485 Conversion Adapter, GP-Pro EX Ver. 3.00.000 or later is required.
• LT3000 Series is supported.

The following issues were corrected:

• When the task type is FIXED_CYCLE only, the communication error occurs and communication is disabled.
• When new variable data are made, it may be made as the already existing name.
• 32bit variable may be read/written separately as each 16bit.

 

[Ver. 1.12.06] 

The following functions were added:

• GP4000 Series is supported.
  * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
• GP4000M Series is supported.
  * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required

 

[Ver. 1.12.05] 

The following function was added:

• Add Indirect Device is added.
  * To use Add Indirect Device, GP-Pro EX Ver. 2.70.000 or later is required.

The following issues were corrected:

• When the worksheet which does not define the variable is chosen, the display of the variable name is not updated
• When the name of the Derived Data Type(Structure/Array) is edited, the Derived Data Type is made as a new Derived Data Type.
• When the CSV file that a large quantity of variable data are defined is imported, it may be replied nothing.
• When New variable data is made, old variable data is not deleted automaticly.

 

[Ver. 1.11.04] (Dec. 24, 2010)

The following function was added:

• GP-4105, GP-4106 are supported.
  * To use a GP-4105, GP-4106, GP-Pro EX Ver. 2.60.000 or later is required.

The following issues were corrected:

• In rare cases, a variable that have been allocated to a real address, is unmatched with the Fuji Electric Co. Ltd. Micrex-SX Series D300Win software.
• In rare cases, the displayed address in the left side of the [Address] window is unfinished.
• In rare cases, putting a comment or space in the IEC file will result in an error when importing.

 

[Ver. 1.10.03] (Nov. 12, 2009)

The following issues were corrected:

• GP-Pro EX may be forcibly terminated when the address input dialog is opened.
• GP-Pro EX may stop responding when import is performed and variables are overwritten.

 

[Ver. 1.10.02] (May. 8, 2008)

The following issue was corrected:

• When create structure in variable data, there is the case that display cannot communicate with PLC.

 

[Ver. 1.10.01] (Oct. 30, 2007)

The following issue was corrected:

• When there are some units such as LonWorks Network Interface Module, error is occurred.