Details
- Caution
- Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time
| Title | ODVA EtherNet/IP Target Driver | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Version | Ver. 1.11.04 | ||||||||||||||||||||
| Supported Software | The required versions of software for this driver installer are as follows. GP-Pro EX Ver. 2.10.000 or later Pro-Server EX Ver. 1.30.000 or later You can check your version by "Help" function -> "Version Info". | ||||||||||||||||||||
| Supported Devices |
We support only evaluated devices. If you want to connect other device, please evaluate connectivity before use your system. | ||||||||||||||||||||
| Supported Units | Required versions depend on models. Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below
| ||||||||||||||||||||
| Device/PLC Connection Manual | For details, please read the "Device/PLC Connection Manual" in the lower part of this page. For general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual". | ||||||||||||||||||||
| Updated Content |
[Ver. 1.11.04] (Aug, 31, 2023) The following setting was added:
|
How to install (This is a self-extracting file.)
- Prior to installation, be sure to close all software applications that are running.
-
- Click on the above file name to download the data to desired folder.
- After the download to your PC is finished, double-click on the file’s icon to start the installer program.
- After the installer starts, follow the instructions given on each screen.
- After installation, run GP-Pro EX.
- Open Device/PLC area’s [ODVA] selection and open [EtherNet/IP Target].
Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
Update history
[Ver. 1.11.04] (Aug, 31, 2023)
The following setting was added:- Port number 2222 is now supported in the Target driver when using the ODVA EtherNet/IP Explicit Messaging driver at the same time.
* ODVA EtherNet/IP Explicit Messaging driver V1.16.20 or later is necessary.
- When using ST6000 Series, communication was not possible through the LAN2 port.
[Ver. 1.10.04] (Nov, 11, 2022)
The following defect was fixed:- When writing the Input device by bitwise from the logic function or device monitor function, sometime the value could not be updated normally.
[Ver. 1.10.03]
The following defect was fixed:- The Implicit communication with the originator may not be possible.
[Ver. 1.10.02]
The following defect was fixed:- In the EDS file creation function, the device settings for the 55th node or later were sometimes not created correctly.
[Ver. 1.10.01] (July 1, 2022)
The following setting was added:- Supports simultaneous use with the " Rockwell Automation, Inc. EtherNet/IP”driver and “ODVA EtherNet / IP Explicit Messaging" driver.
* Rockwell Automation, Inc. EtherNet/IP driver V1.19.39 or later is necessary.
* ODVA EtherNet/IP Explicit Messaging driver V1.15.19 or later is necessary.
[Ver. 1.10.00]
- New
Summary
Last Updated: Aug. 31, 2023