PFXSP5660TPD HMI 12" XGA résistif analogique multipoint

Standard product information
Display specifications
Electrical specifications
Environmental specifications
Interface specifications
Wireless LAN specifications
Structural specifications
Dimensions

Standard product information

Family

HMI

Series

SP5000 Series IHM

Size

12"

Model

PFXSP5660TPD

Global Code

PFXSP5660TPD

Product Features

12" DC Wireless LAN Auto Scaling Brightness Sensor (Premium Display)

Display specifications

Display type

TFT Color LCD

Display size

12.1"

Resolution

1,024 x 768 pixels (XGA)

Auto scaling

Equipped

Effective display area

W245.76 x H184.32 mm [W9.68 x H7.26 in.]

Display colors

16 million colors

Backlight

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

Brightness control

0 to 100 (Adjusted with touch panel or software)

Brightness sensor

Equipped

Touch panel type

Resistive Film (analog, multi-touch)

Touch panel resolution

1,024 x 1,024

Touch panel lifetime

1,000,000 times or more

Electrical specifications

Rated input voltage

12 to 24 Vdc

Input voltage limits

10.8 to 28.8 Vdc

Allowable voltage drop

12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less

Power consumption

Max. 23 W
When power is not supplied to external devices: 20 W or less
Backlight adjusted (20%): 13 W or less
Backlight OFF (Stand-by mode): 8 W or less^*1

In-rush current

30 A or less

Noise immunity

Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

1Power consumption for Display Module only

Environmental specifications

International safety standards

Surrounding air temperature

0 to 60 °C [32 to 140 °F]

Storage temperature

-20 to +60 °C [-4 to 140 °F]

Ambient humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Storage humidity

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Dust

0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s²
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance

IEC/EN 61131-2 compliant 147 m/s², X, Y, Z directions for 3 times

Electrostatic discharge immunity

Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)

Interface specifications

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA
Communication distance: 5 m [16.4 ft.]^*1

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft]

1When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader. If you connect multiple devices that are the same type, only the first device will work.

Wireless LAN specifications

Standards

IEEE802.11b/IEEE802.11g/IEEE802.11n^*1

Frequency bandwidth

2.4 GHz

Channel bandwidth

20 MHz

Channel

Access Point mode: 1 to 11 ch Client mode: North America US: 1 to 11 ch Japan JP: 1 to 13 ch Europe EU: 1 to 13 ch Korea KR: 1 to 13 ch China CN: 1 to 13 ch Taiwan TW: 1 to 11 ch^*2

Transmission speed

IEEE802.11b: max 11 Mbps
IEEE802.11g: max 54 Mbps
IEEE802.11n: max 72.2 Mbps

Transmission distance

The maximum 30 meters. (Distant varies depending on application software or use environment.)

Action mode

Client mode / Access Point mode

Communication mode

Infrastructure

Network authentication

Open, WPA-Personal, WPA2-Personal

Data encryption

WEP (128 bit) (Open) AUTO/TKIP (WPA-Personal) AES (WPA2-Personal)^*3

Maximum client connections

Connection angle and distance

Only the display side is connectable. The enabled connectivity angle and distance depend on your operating environment, applications to be used, and a communication target device. Be sure to conduct operation check including directionality in your operating environment before use.

1For the Wireless LAN, please use in a combination with the Open Box module. Do not use wireless communication to control machinery. Wireless communication system design must take into account the possibility of communication interference.

2In Access Point mode, IEEE802.11d is not supported.
In Client mode, if the surrounding access points do not support IEEE802.11d, channels are limited from 1 to 11 ch.

3In Access Point mode, WEP is not supported.

Structural specifications

Grounding

Functional grounding: Grounding resistance of 100 Ω, 2 mm² (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).

Cooling method

Natural air circulation

Structure

When using a factory-installed front USB cover: IP65F, IP67F, Type 1
When using a front USB cover as an option: IP66F, IP67F, Type 1, Type 4X (indoor use only)/13
NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1).^*1

External dimensions

W315 x H241 x D67 mm [W12.4 x H9.49 x D2.64 in.]

Panel cut-out dimensions

W301.5 x H227.5 mm [W11.87 x H8.96 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]^*2

Weight

3.2 kg [7.1 lb] or less^*3

1The front face of the unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the unit's level of resistance is equivalent to these standards, oils that should have no effect on the unit can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the unit's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the unit and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the unit, be sure to confirm the type of conditions that will be present in the unit's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

2For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

3Display module only.

Dimensions

External dimensions

Display module and box module combination

Panel cut-out dimensions

A	B	C
301.5 (+1/-0) mm [11.87 (+0.04/-0)] in.	227.5 (+1/-0) mm [8.96 (+0.04/-0)] in.	1.6 to 5 mm [0.06 to 0.2] in.

External dimensions with cable

(Image of Open Box)

*1Rotation area of the fastener

*2Pitch of center of installation fastener screws