Details
Supported Connection Devices
| Manufacturer | Product Name | Series | Note |
|---|---|---|---|
| Shibaura Machine Corporation | Robot Controller | - | TS5000 |
In addition, there are optional features that cannot be used along with this feature, so please contact the Shibaura Machine Corporation if you wish to use them.
Target HMI
| Series | Resolution | Display unit type of the sample project file*1 | Screen Editor |
|---|---|---|---|
| GP4000 Series SP5000 Series SP5000X Series ST6000 Series | 640 x 480 dot（VGA） | GP-4501T（Analog Touch Panel） | GP-Pro EX Ver. 4.00.000 or later |
| 800 x 480 dot（WVGA）*2 | Box Module：SP-5B10 Display Module：SP-5400WA | ||
| GP4000 Series | 320 x 240 dot（QVGA） | GP-4301T |
*1If you use the other models, you can change a model in the GP-Pro EX project file. For details, please refer to the Technical Guide.
*2For WVGA (800×480 pixels),there is function button area at the right of the screen. Please read the manual, "Functions Added to Sample Project File for SP5000 Wide Model".
Features
- Robot Controller status can be checked on a GP unit.
- Batch monitoring of the state of signals being communicated between the robot and internal PLC (interface relay state).
Bits can also be forcibly set and reset. - Acquire and display the robot's current position.
- Alarm history can be viewed on a GP unit.
- The alarm history can be checked by displaying the robot controller data.
- " Alarm reset", “Program reset", “Signal reset" and “Buzzer off" instructions can be output to the controller.
- As maintenance functions, device monitor, I/O monitor time chart, and data transfer to connected device screens have been prepared.
* If you do not have a communication driver that corresponds to GP-Pro EX when using the project data, please download it from our website.
We do not guarantee that the operation of this sample will be uninterrupted or error-free.
Terms of use / Cautions
Please acknowledge the following terms of use before you use our download service.Download of any file signifies your agreement to the terms of use.
Terms and conditions
Download file
For SP-5400WA / WVGA(800*480)
3.49 MB (3,664,181 Byte)
For GP-4501T / VGA(640*480)
3.49 MB (3,659,943 Byte)
For GP-4301T / QVGA(320*240)
2.92 MB (3,065,973 Byte)
Update History
[Rev03] (2021/10/15)
Modify connection setting
Added supported robot controller version
[Rev02] (2021/04/20)
Change the description of communication settings
[Rev01] (2021/03/26)
New Release
Summary
This sample project file is for connecting GP4000 / SP5000 / ST6000 Series with the robot controller TS5000 manufactured by Shibaura Machine Corporation. When using the Robot, we provide functions to use more convenient.