PFXGP4401TADR

제품 기본 정보
디스플레이 표시 사양
전기 사양
환경 사양
메모리
인터페이스 사양
설치 사양
외관도

제품 기본 정보

제품 카테고리

HMI

시리즈

GP4000R Series

화면 사이즈

모델

PFXGP4401TADR

글로벌 코드

PFXGP4401TADR

제품 특징

Rear Mount 7" DC Analog

디스플레이 표시 사양

디스플레이 타입

TFT Color LCD

표시 사이즈

7.5"

화면 해상도

640 x 480 pixels (VGA)

유효 표시 사이즈

W153.7 x H115.8 mm [W6.05 x H4.56 in.]

표시 색상

65,536 colors (No blink) / 16,384 colors (Blink)

백라이트

White LED (Not user replaceable. When replacement is required, contact your local distributor.)

백라이트 수명

50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

조도 조정

16 Levels (Adjusted with touch panel or software)

터치 패널 방식

Resistive Film (analog)

터치 패널 해상도

1,024 x 1,024

터치 패널 수명

1,000,000 times or more

표시 언어 종류

Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese, Simplified Chinese, Thai and Cyrillic can be added from the font setting of the screen editor. )

표시 문자 사이즈

Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts

표시 문자 확대율

Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.^*1

8 x 8 dots

80 char. x 60 rows

8 x 16 dots

80 char. x 30 rows

16 x 16 dots

40 char. x 30 rows

32 x 32 dots

25 char. x 15 rows

1문자 확대율은 소프트웨어에 따라 상기 이외의 설정이 가능한 경우가 있습니다.

전기 사양

정격 전압

24 Vdc

허용 전압 범위

19.2 to 28.8 Vdc

순간 정전 허용 시간 범위

5 ms or less

소비전력

3.4 W or less

돌입 전류

30 A or less

내소음성

Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

절연내력

1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

절연저항

500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

환경 사양

해외 안전 규격

사용 환경 온도

0 to 55 °C [32 to 131 °F]

보관 온도

-20 to +60 °C [-4 to 140 °F]

사용 환경 습도

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

보관 습도

10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

먼지

0.1 mg/m³ (10^-7 oz/ft³) or less (non-conductive levels)

오염도

For use in Pollution Degree 2 environment

부식성 가스

Free of corrosive gases

대기압 (사용 고도)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

내진동

IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s²
X, Y, Z directions for 10 cycles (approx. 100 min.)

내충격성

IEC/EN 61131-2 compliant 147 m/s², X, Y, Z directions for 3 times

내정전기방전

Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

메모리

어플리케이션 메모리

When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 32MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: 8MB
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None

Removable System: No

데이터 백업

When using GP-Pro EX:
- Screen Area: SRAM 320KB
- Variable Area: SRAM 64KB

Battery: Replaceable battery / Primary battery for clock data backup

시계 정확도

±65 sec./month (deviation at room temperature and power is OFF)^*1

1Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

인터페이스 사양

시리얼 (COM1)

RS-232C, 비동기식, 데이터 길이 : 7/8비트, 스톱비트 : 1/2비트, 패리티: 없음/홀수/짝수, 전송 속도 : 2,400bps～115.2kbps, 커넥터 : D-Sub 9핀 플러그

시리얼 (COM2)

비동기식, RS-422/485, 데이터 길이 : 7/8 비트, 패리티 : 없음/홀수/짝수, 스톱 비트 : 1/2 비트, 전송 속도 : 2,400 ~ 115,200 bps, 187,500 bps (MPI), 커넥터 : D-Sub9 (플러그)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less

이더넷

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

SD 카드

SD Card Slot x 1

설치 사양

접지

Functional grounding: Grounding resistance of 100 Ω, 2mm² (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)

냉각 방법

Natural air circulation

보호 구조

IP67F^*1

외관 사이즈

W204 x H159.4 x D60.4 mm [W8.03 x H6.28 x D2.38 in.]

패널컷 사이즈

Standard Mount: W155.3 x H117.4 mm [W6.11 x H4.62 in.]
Flat Mount: W174.5 x H134.2 mm [W6.87 x H5.28 in.]^*2

질량

1.4 kg [3.09 lb] or less

1Protection structure equivalent to IP67F can be expected if you affix the Overlay (sold separately) on the screen of the unit and the surroundings. Pro-face does not guarantee the protective structure. Consider the the protective structure in combination with a panel or a resin plate within your quality assurance range. For details, please refer to GP4000 Series Hardware Manual.
Equivalent to IP20 in a standard installation. In a flat installation, protection structure equivalent to IP67F can be maintained by affixing an overlay (sold separately) on the GP screen and its surrounding area. Use the overlay in combination with the protection structure of the panel or resin plate. In a flat installation, if you do not use an overlay, protection is equivalent to IP20.

2As for dimensional tolerance everything +0.5/-0 mm [+0.02/-0 in.] and R in angle are below R1 [R0.04in.]

외관도

외관 사이즈

Panel Type/Standard Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

Panel Type/Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

Resin Boss Type/Standard Mount, Flat Mount

Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

Installation with Installation Fasteners attached to the sides of the GP unit

패널컷 사이즈

Standard Mount (Panel Type/Resin Boss Type)

a)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d)		4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e)		Center of the display area

A	B	C		R
A	B	Panel Type *1	Resin Boss Type *2	R
155.3mm (+0.5, -0mm) (6.11in. [+0.02, -0in.])	117.4mm (+0.5, -0mm) (4.62in. [+0.02, -0in.])	1.6mm (0.06in.) to 3.2mm (0.13in.) (SPCC "JIS G3141" or SECC "JIS G3313") 1.5mm (0.06in.) to 6mm (0.24in.) (SUS304 "JIS G4304, JIS G4305")	2mm (0.08in.) or more	1mm (0.04in.) maximum

Note: If you are designing the panel with a material other than sheet metal, ensure that the material has sufficient strength.

*1 Panel type: Weld the stud bolts to the panel, and then tighten the nuts to fasten the GP unit to the panel.
*2 Resin boss type: Tighten the screws to attach the GP unit to the bosses of the resin boss-molded product.

Attaching Installation Brackets on the Top and Bottom Surfaces of the GP Unit		Attaching Installation Brackets on the Sides of the GP Unit
X1	Y1	X2	Y2
43 (±0.15) [1.69, (±0.01)]	87.5 (±0.15) [3.45, (±0.01)]	109.8 (±0.15) [4.32, (±0.01)]	43 (±0.15) [1.69, (±0.01)]

Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.

Flat Mount (Panel Type/Resin Boss Type)

a)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets at the top and bottom surfaces of the GP unit
b)		Installation positions of stud bolts or positions of boss molds when attaching installation brackets on either side of the GP unit
d)		4-M4 x 10L stud bolts (no foreign material present on the base due to sparking or similar phenomena) or boss molds
e)		Center of the display area

A		B	C		R
A1	A2	B	Panel Type *1	Resin Boss Type *2	R
174.5mm (+0.5, -0mm) (6.87in.[+0.02, -0in.])		134.2mm (+0.5, -0mm) (5.28in. [+0.02, -0in.])	1.6 mm (0.06in.) (SPCC "JIS G3141" or SECC "JIS G3313") 1.5 mm (0.06in.) (SUS304 "JIS G4304, JIS G4305")	2 mm (0.08in.) maximum	1 mm (0.04in.) maximum
86.3mm (+0.25, -0mm) (3.4in. [+0.01, -0in.])	88.2mm (+0.25, -0mm) (3.47in. [+0.01, -0in.])	134.2mm (+0.5, -0mm) (5.28in. [+0.02, -0in.])		2 mm (0.08in.) maximum	1 mm (0.04in.) maximum

Attaching Installation Brackets on the Top and Bottom Surfaces of the GP Unit		Attaching Installation Brackets on the Sides of the GP Unit
X1	Y1	X2	Y2
43 (±0.15) [1.69, (±0.01)]	87.5 (±0.15) [3.45, (±0.01)]	109.8 (±0.15) [4.32, (±0.01)]	43 (±0.15) [1.69, (±0.01)]

Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.

케이블 장착시 외관도

Panel Type (Standard, Flat Mount) / Resin Boss Type (Standard Mount)

NOTE: All the above values are designed with cable bending in mind. The dimensions given here are representative values depending on the type of connection cable in use. Therefore, these values are intended for reference only.